Pontiac Phoenix Suspension Parts

Essential Pontiac Phoenix Suspension Parts

MOOG – Coil Spring Set (Part No.5610)

Coil Spring Set

from

$145.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

MOOG – Control Arm Shaft Kit (Part No.K6146)

Control Arm Shaft Kit

from

$70.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Loose or worn chassis parts can lead to premature tire wear
  • Incorporates proven design and engineering features
See More

TRW – Control Arm Stop (Part No.L2060451692TRW)

Control Arm Stop

from

$12.22
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Stop is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
  • Dynamic testing of complete units to ensure leak free performance
  • Extensive on-road testing at TRW tracks around the world
See More

KAI – Leaf Spring Shock Kit (Part No.GMK402099867K)

Leaf Spring Shock Kit

from

$59.99
New Goodmark Leaf Spring Shackle Kit, Steel And Rubber Components

Product Features:
  • Steel And Rubber Components
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA780)

Max-Air Air Shock Absorber

from

$150.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3167G)

Control Arm Bushing Set

from

$57.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Rare Parts – Spring Bushing (Part No.RP35216)

Spring Bushing

from

$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Heat Treated bushings
  • No Squeak
  • Reduces vibration
See More

MOOG – Shock Mount (Part No.K6353)

Shock Mount

from

$19.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to meet or exceed OE requirements
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart

from

$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Control Arm Bump Stop Set

from

$14.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

KAI – Leaf Spring Shock Nut (Part No.GMK4020997672P)

Leaf Spring Shock Nut

from

$13.99
New Goodmark Leaf Spring Shackle Nut, Package Of 2, Use 6 Nuts Per Car

Product Features:
  • Package Of 2 Use 6 Nuts Per Car
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rare Parts – Coil Spring Insul (Part No.RP46353)

Coil Spring Insul

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)

Monroe Shock Absorber Air Hose Kit

from

$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Monroe – Load Adjusting Shock Absorber (Part No.58270)

Load Adjusting Shock Absorber

from

$110.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55897)

Gas-Matic Passenger Car Shock Absorber

from

$32.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.901934)

Strut-Mate Strut Mounting Kit

from

$66.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

MOOG – Leaf Spring Shackle Bushing (Part No.K6560)

Leaf Spring Shackle Bushing

from

$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

KYB – Jounce Bumper and Bellows (Part No.SB104)

Jounce Bumper and Bellows

from

$25.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63622)

Strut-Mate Strut Boot Kit

from

$27.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG4515)

High Pressure Monotube Gas Shock

from

$72.99
Product Features:
  • Adds up to 25% more damping performance over original equipment shocks
  • Components and valving designed specifically for classic cars
  • High gas pressure design provides instant, extra control
  • Monotube design outperforms all other standard shock absorbers
  • Unique, air-free, hydraulic unit eliminates performance fade
See More

Monroe – Gas-Matic Truck Shock Absorber (Part No.59087)

Gas-Matic Truck Shock Absorber

from

$37.99
Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic light trucks and vans
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – Gas-Matic LT Shock Absorber (Part No.59301)

Gas-Matic LT Shock Absorber

from

$36.49
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:
  • Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Helping You Find the Right Suspension Parts for Your Pontiac Phoenix

You love your Phoenix. So we’ve made it easier than ever to help you find Pontiac Phoenix Suspension Parts in our online catalog. Our inventory holds 60 aftermarket and OEM Suspension Parts for your Pontiac Phoenix, ranging from $7.99 to $251.99.

We offer parts from 13 brands trusted to make quality Suspension Parts for your Pontiac Phoenix. Before you buy, take some time to read through customer reviews. We currently have 2,810 reviews of Pontiac Phoenix Suspension Parts from previous customers. Some of the top rated parts include Strut Bellows with 3.8 stars and OESpectrum Passenger Car Shock Absorber with 5.0 stars.

Find your Phoenix Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Pontiac Phoenix part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Suspension Parts Brands for Your Pontiac Phoenix

Our inventory holds Suspension Parts for your Pontiac Phoenix from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Monroe, and Moog, all of which can keep that Pontiac happy.
We have Lakewood parts available for your Pontiac Phoenix in categories like Shocks and Struts. Some of the top-rated Lakewood parts in these categories are:
Drag Shock-70/30:GM (Rear)
from $104.99
(1)
Drag Shock-70/30:GM (Rear)
Rear Shock and Struts

FAQs for Pontiac Phoenix Suspension Parts

What are the most purchased Suspension Parts for the Pontiac Phoenix?

Out of 60 Suspension Parts for the Pontiac Phoenix, the most popular in our inventory are:
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from $14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
from $11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Gas-Matic LT Shock Absorber
from $36.49
(5)
Gas-Matic LT Shock Absorber
Front Shock and Struts

What are the top-rated Pontiac Phoenix Suspension Parts?

Top-rated Suspension Parts for your Pontiac Phoenix based on customer reviews/ratings are:
Strut Bellows
from $16.99
(11)
Strut Bellows
“Nice”
OESpectrum Passenger Car Shock Absorber
from $57.99
(7)
OESpectrum Passenger Car Shock Absorber
“Good price”
Load Adjusting Shock Absorber
from $110.99
(7)
Load Adjusting Shock Absorber
“Good to give the front a lift”