Pontiac G6 Engine Parts

The Crankshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position of then engine’s crankshaft to the ECM. The ECM then uses this information to determine fuel and spark timing or engine misfire detection. A failed sensor can result in a check engine light, failure to start, intermittent stalling, or misfire. Crankshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

• THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
• OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the crankshaft
• EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
• PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
• INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

GM Genuine Parts Engine Timing Chain Tensioner Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

GM Genuine Parts Multi-Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Fixing a sheared engine timing chain guide bolt with original equipment typically requires a labor-intensive removal procedure. This Dorman OE FIX innovation saves hours by integrating the bolt and plug for an easy repair on GM Ecotec engines.

Product Features:

• Innovative fix – this engine timing chain guide bolt allows for simple replacement of a sheared original bolt
• Saves hours – reduces repair time dramatically by eliminating need for head removal, drilling and tapping
• Integrated design – plug and bolt combined as one piece to easily restore functionality
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium Oil Pans meet or exceed the performance of the original equipment Oil Pans they replace. 100 percentage performance and vehicle engine fit tested. Washed, then sealed with an anti-corrosive spray on both interior and exterior. Durable powder coating applied to exterior of Oil Pan. Coating salt spray tested for over 200 hours in accordance with ASTM B117 standards. Features and Benfits:

Product Features:

• Spectra Premium oil pans meet or exceed the performance of the original equipment oil pans they replace
• 100 percent performance and vehicle engine fit tested
• Washed, then sealed with an anti-corrosive spray on both interior and exterior
• Durable powder coating applied to exterior of oil pan
• Coating salt spray tested for over 200 hours in accordance with ASTM B117 standards

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: C753 Engine Timing Chain (1 EA), C754 Engine Timing Chain (2 EA), 9-5530 Engine Timing Chain Guide (1 EA), 9-5531 Engine Timing Chain Guide (1 EA), 9-5534 Engine Timing Chain Tensioner Guide (1 EA), 9-5533 Engine Timing Chain Tensioner Guide (1 EA), 9-5532 Engine Timing Chain Guide (1 EA), 9-5548 Engine Timing Chain Guide (1 EA), 9-5536 Engine Timing Chain Tensioner (1 EA), 9-5535 Engine Timing Chain Tensioner (1 EA), 9-5537 Engine Timing Chain Tensioner (1 EA).

Product Features:

• Timing Chain Kits includes all components for a quick and efficient replacement
• Utilizes the latest in design and technology to offer a complete chain kit solution
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• CAD designed and manufactured using premium materials
• Refer to our online catalog for detailed application-specific information

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Face of top rings coated with latest generation Plasma-Moly
• Decreases friction
• Very resistant to scuffing
• Exacting tolerances
• Meets or exceeds OEM specifications

This VVT sprocket bolt is designed to match the fit and function of the original part on specified vehicles for a proper repair of the variable valve timing system. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this VVT sprocket bolt matches the fit and function of the factory part on specified years, make and models
• Ideal solution – this VVT sprocket bolt is a reliable replacement for an original part that has become stripped or broken during repair
• Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to PONT 06-09;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2006-2009
• Weight approx: 5 Lbs

ENG BAL SHFT SPRCKET

BODY CTRL COMP.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
• The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
• The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
• The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
• The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
• The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
• The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S848T Engine Timing Camshaft Sprocket (1 EA), S847 Engine Timing Crankshaft Sprocket (1 EA), C700 Engine Timing Chain (1 EA).

Product Features:

• Utilizes the latest in design and technology to offer complete chain sets
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Utilizes the latest in design and technology to offer complete chain sets
• Refer to our online catalog for detailed application-specific information

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

ENG BAL SHFT CHN TNS

This replacement camshaft adjuster magnet is a direct replacement for a damaged original equipment magnet. Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:

• Ideal replacement – this VVT adjuster magnet matches the fit and function of the original equipment part to restore proper operation to the variable valve timing system
• Durable construction – this VVT adjuster magnet is made of quality materials to ensure reliable performance and a long service life
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

GM Genuine Parts Engine Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules regulate various parts of your vehicle’s engine by receiving input from sensors and additional modules and then referencing that information back to other sensors, modules, and areas of the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function