Pontiac G6 Parts

Name: Ford Trim Panel Retainers
Brand: Dorman
SKU: 963-022
Price: 3.49 USD

Pontiac G6 Body Parts

from

$3.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$23.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$96.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$38.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$34.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$13.49

Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

The most economical way to replace cracked Mirror glass
Glass measures 4 3/4″ tall by 7″ wide and 7 11/16″ diagonally
This glass fits Mirrors with Manual function only
Mounting tape included for low-hassle stick-on installation
Step-by-step instructions for easy installation

from

$81.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is power adjustable
OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
Manual folding for additional clearance
Textured Black with Paintable to match cover

from

$5.29

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

Needa Parts offers a complete assortment for all popular makes and models
Vehicle make specific fastener kits are available
All fasteners meet or exceed OEM standards

from

$4.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$69.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$19.99

New, Standard Replacement Passenger Side Front Bumper Cover Bracket

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Or Modifications Needed For Installation
Same Form Fit As OE

from

$28.99

GM Genuine Parts Trunk Lid Release Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$2.79

Needa Parts offers a complete assortment for all popular makes and models
Vehicle make specific fastener kits are available
All fasteners meet or exceed OEM standards

from

$61.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$282.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$93.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$39.99

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem standard replacement passenger side inner upper grille insert, black steel mesh. It is designed to replace your existing passenger side grille insert. Check to be sure it fits your vehicle.

Product Features:

Black Steel Mesh
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Warranty: Limited
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$33.49

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$68.99

New CAPA Certified Premium Replacement Passenger Side Fender

Product Features:

Made Of Galvanized Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Driver Side Upper Grille Chrome Molding. It is Designed to Replace Your Existing Grille Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:

Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$0.99

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service.
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$29.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Switch is a versatile component that can control various functions such as door locks, windows, or side mirrors. Whether used for a single function or multiple operations, it offers reliable control and enhances the driver’s convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$66.99

ACDelco Professional Multi Purpose Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$141.99

This trunk lock actuator motor matches fit and function of the original equipment actuator motor to restore proper trunk latch functions. Designed as a direct replacement, this part plugs into the factory wiring.

Product Features:

Ideal replacement – this trunk lock actuator motor matches the fit and function of the original actuator motor to restore trunk latch functions
Simple installation – this actuator motor features factory-style connectors and plugs into the original wiring harness
Cost-effective solution – offers original equipment function at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

Pontiac G6 Transmission Parts

from

$40.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$113.99

GM Genuine Parts Park / Neutral Position Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$119.99

ATHARNESS VSS REPR

from

$85.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$55.99

This automatic transmission shifter cable matches the fit and function of the original equipment cable to ensure a trustworthy repair. Made of quality materials, it has been extensively tested to ensure a long service life.

Product Features:

Direct replacement – this automatic transmission shifter cable matches the fit and function of the original equipment part.
Durable materials – this shifter cable is manufactured from quality materials for durability.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$65.99

AT PRESS SW MANIFOLD

from

$45.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$36.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$40.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$10.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$47.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$35.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$4.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$39.99

REUSABLE AT PAN GSKT

from

$19.99

AT SEAL DRIVE AXLE

from

$13.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$5.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$2023.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$8.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$28.99

The Automatic Transmission Fluid Temperature Sensor provides an input to the transmission control module as to the operating temperature of the automatic transmission fluid under the many operating conditions. The transmission control module will provide the transmission hydraulic circuits the optimal fluid pressure for current temperature conditions.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$16.99

This Dorman Automatic Transmission Oil Cooler Gasket eliminates leaks where the oil cooler line connects to the transmission. Gasket may break down over time, causing leaks, and should be replaced any time the oil cooler line and transmission are separated.

Product Features:

Durable construction – rubber over steel construction creates a positive seal and retains its shape
Direct replacement – fits and functions like original equipment
Easy to install – direct-fit, no special tools required
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$241.99

This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Does not include steels or filter

from

$31.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$54.99

This transmission range sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transmission range sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$174.99

GM Genuine Parts Transmission Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help control shifting in vehicles with automatic transmissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Pontiac G6 Clutch Systems

from

$476.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$215.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

Pontiac G6 Automotive Accessories

from

$19.99

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
Universal Fit
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
133dB @ 4″, 12V

from

$69.99

The AVS Carflector hood shield is designed specifically for cars, CUVs, and SUVs with its medium profile wrap design to provide protection from road debris. Comes with a the AVS Carflector is car wash safe and easy to install.

Product Features:

Provides Deflection To Protect Hood, Fenders, And Windshield
Medium Profile, Wrap-Around Design For Cars And CUVs
Off-The-Hood Design Allows For Easy Cleaning And Waxing
Durable, Impact-Resistant Acrylic Construction
Available In Dark Smoke Finish
Easy, No-Drill Installation

from

$14.99

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$27.99

This direct replacement cigarette light is designed to match the fit and function of the original lighter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this direct replacement cigarette lighter is designed to match the fit and function of the original lighter on specified vehicles
Ideal solution – this cigarette lighter is a reliable replacement for an original lighter that is missing or burned out
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$99.99

The Premium Car Cover is our one of kind 3-layer cover. Made from 3 durable layers, this cover provides unparalleled waterproof protection for your vehicle. The Budge Premium car cover combines multiple layers of exceptionally waterproof polypropylene with an interior waterproof membrane while the inner most layer of the cover is comprised of a nonabrasive fleece-like material. This cover is also UV treated to protect against harsh sun exposure.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
Material has a soft inner lining that will not scratch the surface of your vehicle
Built-in strap and buckle system keeps cover secure
This car cover is made from 3 durable layers that will keep your vehicle protected
Full elastic hem creates a comfortable fit

from

$159.99

Lightweight & thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust & air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H.
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
Available in black, silver & red colors

from

$20.99

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
Reliable construction – keeps moisture and debris out of internal electronics for long service life
Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

from

$17.99

Sometimes the outer case for your keyless entry remote can be damaged or cracked. Even normal wear and tear can often lead to an unpleasant cosmetic appearance. This replacement shell will have your remote looking sleek and stylish in no time.

Product Features:

Replacement Case for Select GM Remotes
Replaces OEM factory-original remote case

from

$101.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$109.99

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

Freeze plug heater cartridge

from

$56.99

New Standard Replacement Undercar Shield, Under Front Bumper

Product Features:

Under Front Bumper, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$94.99

New CAPA Certified Standard Replacement Undercar Shield, Under Front Bumper

Product Features:

Under Front Bumper, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$85.99

Need a new keyless remote? This fob is designed to look and function exactly like your original, and you don’t need to pay for expensive programming at the car dealership. This Dorman OE FIX replacement includes a patented, DIY-friendly programming tool for simple replacement. Just plug it into the OBD II port in your dashboard, follow the included instructions, and you’re good to go. Setup takes minutes, and you can rely on your new remote for years.

Product Features:

Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
Do-it-yourself solution – includes a patented programmer that plugs into your OBD II port to setup your new fob in minutes, without expensive dealership programming
Matches features – this 5-button remote control features lock, unlock, panic, trunk release and start buttons to retain access to all remote functions
Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

from

$47.99

Needing a new key? We’ve got you covered! Keys come in many shapes and sizes. Non-transponder keys, such as these, require no special programming.

Product Features:

Works on select Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, & Suzuki vehicles.
Requires no special programming
No special programming required

from

$69.99

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a .

Product Features:

Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Design
Easy Installation With No-Drilling Or Special Hardware Required
Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
Made From Durable, Impact-Resistant Acrylic
Available In Dark Smoke And Chrome Finishes

from

$80.99

Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
Do-it-yourself solution – includes a patented programmer that plugs into your OBD II port to setup your new fob in minutes, without expensive dealership programming
Matches features – this 4-button remote control features lock, unlock, panic and trunk release functions
Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

from

$74.99

Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
Do-it-yourself solution – includes a patented programmer that plugs into your OBD II port to setup your new fob in minutes, without expensive dealership programming
Matches features – this 4-button remote control features lock, unlock, panic and trunk release functions
Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

from

$129.99

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$109.99

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

Capacity: 10 cu ft
Dimensions: 36″ L x 30″ W x 16″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Pontiac G6 Interior Products

from

$22.99

ACDelco GM Original Equipment Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$67.99

GM Genuine Parts Turn Signal Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It activates the turn signal lights on your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Work with vehicle electronics to help optimize vehicle capabilities
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$23.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Pedal Height Adjustment Switch enables drivers to customize the position of the accelerator and brake pedals, enhancing comfort and accessibility for a more personalized driving experience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$39.49

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Hazard Warning Switch activates the vehicle’s emergency lights, enhancing safety by alerting other drivers to potential hazards and ensuring visibility during roadside emergencies or adverse conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$27.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$26.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$105.99

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

Unique warp-knit design fits perfectly with today’s vehicle interiors
Compliments technical fabrics in newer vehicles
Custom fit to the dashboard of your vehicle
Helps prevent dashboard warping and cracking
Reduces hazardous windshield glare
Vents and sensor openings pre-cut for a factory finish look
Passenger-side airbag opening included where applicable
Hook and loop fasteners included for easy secure installation

from

$52.99

This console multi-function switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this console multi-function switch is made to match the fit and performance of the original switch on specific vehicle applications
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$31.99

The Automatic Headlight Sensor is a photoelectric device that reacts to ambient light conditions reporting to the body control module which will turn the headlights on or off based ambient light conditions.

Product Features:

Application matched components ensure the automatic headlight system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
This part will look and function just like the original sensor.

from

$13.49

This radio knob is designed to match the fit and function of the original control knob on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this radio knob is designed to match the fit and function of the original control knob on specified vehicles
Restores functionality – this knob is made to fully restore appearance and functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$36.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$61.99

The Adjustable Pedal Sensor reports to the BCM (body control module) the location of the adjustable brake and accelerator pedal positions. On some vehicles equipped with adjustable pedals the system may also feature a multiple driver convenience feature which can program multiple vehicle operators preferred pedal position. This sensor allows the pedal to return to the preprogrammed position.

Product Features:

Application matched components ensure the adjustable pedal control system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$115.99

The Accelerator Pedal Position (APP) sensor provides a signal identifying the location of the accelerator pedal to the engine control module. As the vehicle operator requests various degrees of torque from the engine the signal from the sensor provides the engine computer the necessary information to implement the request. The sensor provides two positive slope signals that have an offset voltage range and increase at different rates, the two signals from the sensor provide the engine computer with two unique signal inputs ensuring safety should one signal fail.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$52.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$38.99

The Brake Pedal Position sensor is similar to the Stop Light Switch but is a more critical sensor input to the vehicle stability system. The vehicle stability control module requires the exact location of the brake pedal during a vehicle skid so that a controlled brake pressure may be applied to each individual wheel in an attempt to straighten the vehicle position out and back into control.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$19.99

The AM-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

Features corrosion resistant steel housing and universal mounting bracket.
Available in high and low tone
FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications.
FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle with 12 volt application
125dB @ 4″, 12V

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$211.99

As part of the Vehicle Stability System multiple sensor inputs are required for the processor to perform the brake control operation to maintain vehicle skid control and vehicle stability control. The Power Steering Speed Sensor provides the processor the needed steering position and rotational speed input required for proper braking operation.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$179.99

As part of the Vehicle Stability System multiple sensor inputs are required for the processor to perform the brake control operation to maintain vehicle skid control and vehicle stability control. The Steering Wheel Motion Sensor provides the processor the needed steering position and rotational speed input required for proper braking operation.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$27.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$116.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$182.99

The airbag clockspring is one piece of the passenger restraint system. The restraint airbag located in the driver’s steering wheel is hardwired, meaning the airbag has a directly wired connection to the vehicle passenger restraint module. The clockspring is located within the steering column just below the airbag assembly and contains a spirally wound flat ribbon conductor within it. As the steering wheel is rotated during normal driving conditions the electrical connection between the air bag and the restrain module remains complete.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Looking for the best Pontiac G6 aftermarket replacement parts? Replacing worn and broken parts on your Pontiac G6? Check out our online catalog to find the best selection of aftermarket Pontiac G6 parts as well as real user reviews on Pontiac G6 replacement parts. Make an informed decision about every component you add to your G6.

At Advance Auto, we’ve got you covered when it comes to getting your Pontiac G6 in tip top condition. We’ve got over 2,469 Pontiac G6 parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Pontiac G6 parts catalog to compare OEM and aftermarket parts for your Pontiac G6.

Whether you need Pontiac G6 body parts, interior components, or custom Pontiac G6 parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Pontiac Interior Products same day? No problem, you can pick up G6 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Pontiac G6 parts has never been easier.

Advance Auto customers frequently search for the following types of Pontiac G6 auto parts. Check out customer reviews and ratings, and compare prices on the following Pontiac G6 parts:

People also search Advance Auto for these popular years of the Pontiac G6:

Pontiac G6 Parts

Dorman – Ford Trim Panel Retainers (Part No.963-022)

Carquest Premium – Multi-Use Connector (Part No.PTA1829)

Dorman – Help – Exterior Door Handle with Keyhole (Part No.88320)

StrongArm – Trunk Lift Support: 12.05" Ext Length, 3.9" Travel, 76 Lbs of Force, 1 Pk (Part No.E6412)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2712)

K-Source – Passenger Side Convex Replacement Glass (Part No.90206)

K-Source – Mirror Assembly: Passenger Side, Power Adjustment, Foldable, 1 Pk (Part No.62747G)

Needa Parts – Door Weatherstrip (Part No.464100B)

Dorman – GM Trim Panel Clip (Part No.963-211D)

GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT2882)

KAI – Front Passenger Side Bumper Cover Bracket, Plastic (Part No.GM1043111)

GM Genuine Parts – Trunk Lid Release Switch (Part No.D1409G)

Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)

Carquest Premium – Multi-Use Connector (Part No.PTC2523)

Dorman – Door Lock Actuator – Integrated with Latch (Part No.931-352)

Carquest Premium – Power Window Switch Connector (Part No.PTC2215)

KAI – New OEM Standard Replacement Upper Grille Insert (Part No.GM1200540OE)

Carquest Premium – Multi-Use Connector (Part No.PTA1113)

Carquest Premium – Multi-Use Connector (Part No.PTA1379)

KAI – Fender (Part No.GM1241321PP)

KAI – New CAPA Certified Standard Replacement Driver Side Upper Grille Chrome Molding (Part No.GM1200542C)

Dorman – Panel Trim Retainer, Interior, GM/Ford/Chrysler (Sold by each) (Part No.700-365)

Carquest Premium – Door Window Switch (Part No.WSA1135)

ACDelco – Heater and Air Conditioning Blower Motor Resistor Pigtail (Part No.PT2485)

Dorman – Integrated Door Latch Actuator (Part No.940-109)

Felpro – AUTOMATIC TRANSMISSION OIL PAN GASKET (Part No.TOS 18723)

GM Genuine Parts – Park/Neutral Position Switch (Part No.D2259C)

ATP – ATHARNESS VSS REPR (Part No.JE-24)

Dorman – Transmission Oil Pan (Part No.265-909)

Dorman – Gearshift Control Cable (Part No.905-642)

ATP – AT PRESS SW MANIFOLD (Part No.JE-44)

Felpro – Automatic Transmission Valve Body Cover Gasket (Part No.TOS 18716)

Carquest Premium – Multi-Use Connector (Part No.PTE1606)

Carquest – Automatic Transmission Control Solenoid (Part No.S9849)

Dorman – Transmission Line Connector – Tube Size 3/8 – Thread 9/16-18UNF (Part No.800-614)

Carquest Premium – Multi-Use Connector (Part No.PTA2106)

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SBA3782)

National – Multi-Purpose Seal (Part No.4918)

ATP – REUSABLE AT PAN GSKT (Part No.JG-143)

ATP – AT SEAL DRIVE AXLE (Part No.XO-16)

FAG US – Shaft Seal (Part No.SS60801)

Driveworks – Oil Seal (Part No.S-4072N)

Shift Pro by ETE – 4T45E Automatic Transmission Assembly (Part No.T280210)

National – Automatic Transmission Output Shaft Seal (Part No.100165)

Carquest Premium – Automatic Transmission Fluid Temperature Sensor (Part No.WTA1322)

Dorman – Help – Transmission Oil Cooler Seal (Part No.66998)

Pro-King – Automatic Transmission Basic Rebuild Kit (Part No.KB-877)

Carquest Premium – Multi-Use Connector (Part No.PTA1078)

Dorman – Transmission Range Sensor (Part No.511-110)

GM Genuine Parts – Transmission Control Module (Part No.24252114)

LuK – Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, Steel Flywheel, 23 Tooth Spline (Part No.04-251)

LuK – Clutch Slave Cylinder (Part No.LSC458)

Fiamm – Freeway Blaster Low Note Horn: Universal Fit, Hardware Included (Part No.7211223)

Auto Ventshade (AVS) – Carflector, Hood Protector, Smoke, Low Profile, 1 Pc (Part No.20923)

Dorman – Help – Fender Liner Retainer (Part No.45718)

Dorman – Help – Lighter Socket and Removal Tool (Part No.56457)

Budge – Budge Premium Car Cover, 3 Layer Moderate Weather Protection for Cars, Fits Cars up to 16′ 8" (Part No.3LF3)

Budge – Indoor Stretch Car Cover, Red Size 3: Fits up to 16 ft. 8 in. L, Soft Inner Lining (Part No.RSC-3)

Dorman – Help – Keyless Remote Cases Repair (Part No.13636)

iKeyless – GM – 5 Button Black Remote Replacement Shell (Part No.GMMT500)

Kat’s – Freeze Plug Heater (Part No.11484)

Kat’s – Engine Heater Cartridge (Part No.11811)

KAI – Undercar Shield (Part No.GM1228104)

KAI – Undercar Shield (Part No.GM1228104C)

Dorman – Help – Keyless Entry Remote 5 Button (OE Fix) (Part No.13731)

iKeyless – GM Simple Key Classic (Part No.GMTKSK)

Auto Ventshade (AVS) – Ventvisor Window Visors, Outside Mount, Smoke, Front And Rear, 4 Pc (Part No.94831)

Dorman – Help – Keyless Entry Remote 4 Button (OE Fix) (Part No.13732)

Dorman – Help – Keyless Entry Remote 4 Button (OE Fix) (Part No.13735)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.3206093)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.3206053)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Grey (Part No.3206082)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.3206073)

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

GM Genuine Parts – Black Multi-Purpose Relay (Part No.D1780C)

Dorman – Panel Trim Retainer – Interior – GM/Ford/Chrysler (Part No.45680)

GM Genuine Parts – Turn Signal and Headlamp Dimmer Switch (Part No.D6253E)

Carquest Premium – Pedal Height Adjustment Switch (Part No.SBA2618)

Carquest Premium – Hazard Warning Switch (Part No.HDA1041)