Pontiac Firebird Tools
Top Pontiac Firebird Tools Categories
We carry over 117 Tools in inventory for the Pontiac Firebird. If you’re looking for aftermarket Tools for your Pontiac Firebird, check out all these categories:
Essential Pontiac Firebird Tools
Hypertech – ThermoMaster Power Chip (Part No.128842)
from
$252.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Carquest Premium – Diagnostic Test Connector (Part No.PTA1326)
from
$11.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Brake Bleeder (Part No.N7050831840DOR)
from
$3.60
Brake Bleeder
KAI – Screw Set (Part No.GMK4030950651S)
from
$34.99
Product Features:
See More
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Screw Set/Kit (Part No.GMK4010950651S)
from
$32.99
New, Goodmark 28 Piece Wheel Opening Molding Screw Set
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
Yukon Gear – Multi-Shim Driver (Part No.56077)
from
$198.99
Yukon multi-shim driver. This shim driver tool works on a variety of applications including: – GM 7.5″, 8.2″, 8.5″, 8.6″, 12P, 12T, – Ford 7.5″, 8.8″, 9.75″, 10.25″, 10.5″, – Model 35, Dana 44HD, Dana 44 JK, and more! No return.
Product Features:
See More
Product Features:
- Carrier Multi-shim driver
- Allows for easier carrier shim installation without damaging carrier shims
Felpro – Engine Crankshaft Repair Sleeve Tool (Part No.16329)
from
$48.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Brake Bleeder Screw 10mm-1.5 X 30mm (Part No.484-152.1)
from
$2.99
This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Brake Bleeder Screws – Quick Bleeders – M10-1.0 X 33mm (Part No.12706)
from
$15.99
This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Melling – Engine Camshaft Gear Installation Tool (Part No.CSIT-LS)
from
$135.99
Made In USA. Builders have found an issue when assembling the GM LS engines timing sets. Improper installation of the camshaft sprockets or phasers can damage or push the locating pin back into the camshaft during installation. As a result Melling has released the CSIT-LS installation tool which is designed to aid in the installation of both the camshaft and the camshaft sprocket or phaser. The CSIT-LS can be used with both single bolt and 3-bolt cams. The CSIT-LS installation tool is made from alloyed tool steel and heat treated for durability.
See More
KAI – Screw (Part No.GMK4041936583)
from
$6.99
New, Goodmark Inside Mirror To Bracket Screw
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
Dorman – Rear Crankshaft Oil Seal Installer (Part No.635-000)
from
$106.99
When replacing the rear main seal cover on specified vehicle applications, this must-have tool ensures the cover is properly aligned on the crankshaft to prevent damage and leaks. Made of steel, it’s finished with zinc plating for durability.
Product Features:
See More
Product Features:
- Ideal solution – this must-have rear main seal cover installation tool ensures the cover is properly aligned on the crankshaft.
- Application specific – engineered for a proper repair on specified applications.
- Convenient and valuable – helps ensure alignment to prevent damage and leaks
- Durable construction – machined from low-carbon steel, zinc-plated and clear-chromate-coated for durability
Dorman – Help – Clutch Alignment Tool Splines 14, Outer Diameter 1 In. (Part No.14504)
from
$3.49
Ensure proper alignment during clutch installations and service with this convenient clutch alignment tool. Made of quality materials for long and reliable service life.
Product Features:
See More
Product Features:
- Convenient solution – ensure proper alignment during clutch installations and service with this handy alignment tool.
- Restores functionality – do the job right the first time with the right tool
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Clutch Alignment Tool Splines 26, Outer Diameter 1-1/8 In. (Part No.14523)
from
$3.49
Ensure proper alignment during clutch installations and service with this convenient clutch alignment tool. Made of quality materials for long and reliable service life.
Product Features:
See More
Product Features:
- Convenient solution – ensure proper alignment during clutch installations and service with this handy alignment tool.
- Restores functionality – do the job right the first time with the right tool
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Melling – Oil Pump Screen Installation Tool (Part No.MCAT-75)
from
$127.99
Made In USA. Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.
Product Features:
See More
Product Features:
- Screen installation tool allows for installing press-in type oil pump screen assembly safely
- Manufactured from high quality materials for consistent durability
- For use with 3/4 In. diameter tubes
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Melling – Oil Pump Screen Installation Tool (Part No.MCAT-62)
from
$108.99
Made In USA. Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.
Product Features:
See More
Product Features:
- Screen installation tool allows for installing press-in type oil pump screen assembly safely
- Manufactured from high quality materials for consistent durability
- For use with 5/8 In. diameter tubes
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Dorman – Help – Brake Bleeder Screw Tech Tray (Part No.799-443)
from
$27.99
This brake bleeder screw assortment is designed to match the fit and function of the original hardware. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake bleeder screw assortment is designed to match the performance and function of the original hardware.
- Ideal solution – the brake bleeder screws in this assortment are precision-engineered for an exact fit
- Durable construction – made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Hypertech – GM Truck/SUV Speedometer Calibrator & Diagnostic Tool (Part No.732500)
from
$279.99
If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).
Product Features:
See More
Product Features:
- Speedometer correction for multiple tire sizes
- Adjustable tire size/gear ratio change
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
Pontiac Firebird Tools Categories
Helping You Find the Right Tools for Your Pontiac Firebird
You love your Firebird. So we’ve made it easier than ever to help you find Pontiac Firebird Tools in our online catalog. Our inventory holds 117 aftermarket and OEM Tools for your Pontiac Firebird, ranging from $0.87 to $279.99.
We offer parts from 9 brands trusted to make quality Tools for your Pontiac Firebird. Before you buy, take some time to read through customer reviews. We currently have 33,369 reviews of Pontiac Firebird Tools from previous customers. Some of the top rated parts include Brake Bleeder Screws – Quick Bleeders – M10-1.0 X 33mm with 4.5 stars and Bleeder Screws M8-1.25 X 24mm with 3.3 stars.
Find your Firebird Tools here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Pontiac Firebird part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Tools Brands for Your Pontiac Firebird
Our inventory holds Tools for your Pontiac Firebird from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, Carquest, and Carquest Premium, all of which can keep that Pontiac happy.
We have Russell parts available for your Pontiac Firebird in categories like Brake Tools. Some of the top-rated Russell parts in these categories are:
Top-Rated Dorman – Help Tools
Leading Dorman – Help Tools
We carry Dorman – Help brand parts for your Pontiac Firebird across several catalog categories, including Brake Tools. Some of our most reviewed Dorman – Help parts include:
FAQs for Pontiac Firebird Tools
What are the most purchased Tools for the Pontiac Firebird?
Out of 117 Tools for the Pontiac Firebird, the most popular in our inventory are:
What are the top-rated Pontiac Firebird Tools?
Top-rated Tools for your Pontiac Firebird based on customer reviews/ratings are:
from
$15.99
(8)
Brake Bleeder Screws – Quick Bleeders – M10-1.0 X 33mm
“Great product makes it so much easier.”
from
$7.99
(4)
Bleeder Screws M10-1.0 X 35mm
“Used to replace my stripped ones on my 95′ Nissan pickup 4×4. I noticed that the the new dorman ones were a little longer than the stock ones but it s”
