Plymouth Fury I Cooling and Climate Controls

Essential Plymouth Fury I Cooling and Climate Controls

Factory Air – New York & Tec 206,209,210,HG850,HG1000 Clutch Assembly w/ Coil (Part No.47551)

New York & Tec 206,209,210,HG850,HG1000 Clutch Assembly w/ Coil

from

$193.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

Motorad – Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees (Part No.4830KT)

Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees

from

$14.79
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14544)

Belt-Driven Fan Spacer Kit

from

$19.79
Belt-Driven Fan Spacer Kit

National – Bearings (Part No.5206-DD)

Bearings

from

$52.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Premium – Blower Motor: Without Wheel (Part No.35502)

Blower Motor: Without Wheel

from

$29.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle (Part No.902-3015)

Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle

from

$11.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Flex A Lite – 400 Series Nylon Flex Fan (Part No.418)

400 Series Nylon Flex Fan

from

$34.99
400 Series Nylon Flex Fan

Carquest Premium – Heater Core (Part No.399101)

Heater Core

from

$72.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Carquest Premium – Universal Fan Clutch – Non-Thermal (Part No.211043)

Universal Fan Clutch - Non-Thermal

from

$38.49
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1268)

A/C Compressor Cut-Out Switch

from

$4.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13478)

Standard Thermostat: 180 Degrees

from

$10.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Factory Air – Compressor Discharge Port Gasket (Part No.24136)

Compressor Discharge Port Gasket

from

$2.99
Steel construction; Compatible with R12 And R134A; High quality construction; Oil resistant; Universal applications
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Carquest Premium – Reverse Rotation Blower Motor Wheel (Part No.35528)

Reverse Rotation Blower Motor Wheel

from

$11.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Durable Plastic Material
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Retainer clip installation
See More

Carquest Premium – Engine Coolant Temperature Sending Unit Switch Connector (Part No.PTA1217)

Engine Coolant Temperature Sending Unit Switch Connector

from

$5.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed for the OE distributor as a direct replacement part
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1097)

Temperature Sender With Gauge

from

$16.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Carquest Premium – A/C Filter Drier (Part No.T33280)

A/C Filter Drier

from

$17.79
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

MAHLE Original – ADHESIVE WTR OUT (Part No.C24109)

ADHESIVE WTR OUT

from

$1.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Carquest Premium – New Compressor New York 209-210 (Part No.T58057)

New Compressor New York 209-210

from

$354.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All compressors go through sophisticated testing and leak test processes
  • Includes specific electrical connector to eliminate splicing
  • For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
  • Validated for fit, form, and function to OE standards
See More

Carquest Premium – New Premium Water Pump (Part No.T4033)

New Premium Water Pump

from

$49.49
This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. A

Product Features:
  • This pump is used on accessory belt driven applications
  • Used mostly on models equipped with a fan clutch
  • It is highly recommended that the fan clutch be replaced with the water pump
  • All gaskets or seals necessary for installation are supplied with pump
  • Durable housing features precisely machined mounting surfaces for proper sealing
See More

Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38683)

A/C TXV O-Ring Expansion Valve

from

$21.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Factory Air – Carbon Shaft Seal Kit (Part No.24021)

Carbon Shaft Seal Kit

from

$26.99
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Factory Air – System Mounted Low Cut-Out Pressure Switch (Part No.35758)

System Mounted Low Cut-Out Pressure Switch

from

$10.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Helping You Find the Right Cooling and Climate Controls for Your Plymouth Fury I

You love your Fury I. So we’ve made it easier than ever to help you find Plymouth Fury I Cooling and Climate Controls in our online catalog. Our inventory holds 92 aftermarket and OEM Cooling and Climate Controls for your Plymouth Fury I, ranging from $0.99 to $577.99.

We offer parts from 13 brands trusted to make quality Cooling and Climate Controls for your Plymouth Fury I. Before you buy, take some time to read through customer reviews. We currently have 62,689 reviews of Plymouth Fury I Cooling and Climate Controls from previous customers. Some of the top rated parts include Electric Fan – 12" Diameter with 3.5 stars and Adjustable Thermostatic Fan Control with 4.8 stars.

Find your Fury I Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Plymouth Fury I part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your Plymouth Fury I

Our inventory holds Cooling and Climate Controls for your Plymouth Fury I from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Permatex, and Motorad UltraStats, all of which can keep that Plymouth happy.

Top-Rated Carquest Premium Cooling and Climate Controls

Leading Carquest Premium Cooling and Climate Controls

We carry Carquest Premium brand parts for your Plymouth Fury I across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Carquest Premium parts include:
Radiator Cap: 16 PSI
from $9.79
(260)
Radiator Cap: 16 PSI
Radiator Caps
Standard Thermostat: 195 Degrees
from $9.99
(107)
Standard Thermostat: 195 Degrees
Thermostats
Radiator Cap: 16 PSI
from $16.79
(91)
Radiator Cap: 16 PSI
Radiator Caps

FAQs for Plymouth Fury I Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the Plymouth Fury I?

Out of 92 Cooling and Climate Controls for the Plymouth Fury I, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Standard Thermostat: 180 Degrees
from $9.99
(36)
Standard Thermostat: 180 Degrees
Thermostats

What are the top-rated Plymouth Fury I Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your Plymouth Fury I based on customer reviews/ratings are:
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
“If you read the instructions it’s pretty self explanatory.”