Oldsmobile 442 Drivetrains

Essential Oldsmobile 442 Drivetrains

MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)

Universal Joint Strap Kit

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 355, 372 & 534G
  • Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
See More

Dorman – Driveshaft Slip Yoke (Part No.697-557)

Driveshaft Slip Yoke

from

$152.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles.
  • Effective fix – replacement restores safe, smooth driveline operation.
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)

Standard Open Side Gear Thrust Washer For 8.5" GM

from

$15.99
Standard open side gear thrust washer for 8.5″ GM.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.5″
See More

Yukon Gear – Ring Gear Bolt (Part No.33049)

Ring Gear Bolt

from

$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:
  • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
  • 7/16″ x 20
See More

Motive Gear – Pinion Nut (Part No.1260823)

Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

National – Bearings (Part No.M804010)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

FAG US – AXLE SHAFT REPAIR BE (Part No.DR0148K)

AXLE SHAFT REPAIR BE

from

$64.99
AXLE SHAFT REPAIR BE

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

8.5" & 8.2" GM Carrier Installation Kit

from

$109.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Dorman – Spindle Nut (Part No.K1002831647DOR)

Spindle Nut

from

$6.19
Spindle Nut

Motive Gear – Differential Gear Install Kit (Part No.GM12IKC)

Differential Gear Install Kit

from

$64.49


Product Features:
  • MINI INSTALL KIT GM 12BLT 8.875 CAR
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 7.5" In A 4.30 Ratio (Part No.24482)

High Performance Ring & Pinion Gear Set For GM 7.5" In A 4.30 Ratio

from

$624.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits GM 7.5″ and 7.6″
  • 7.50″ ring gear diameter
  • 27 spline pinion
  • 10 ring gear bolts
  • 4.30 ratio
See More

National – Shaft Repair Sleeve (Part No.99170)

Shaft Repair Sleeve

from

$38.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Differential Mini Spool

from

$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – 1541H Alloy Rear Axle For GM 7.5" Passenger, Monte Carlo And El Camino (Part No.21288)

1541H Alloy Rear Axle For GM 7.5" Passenger, Monte Carlo And El Camino

from

$273.99
Yukon 1541H alloy rear axle for GM 7.5″ Passenger, Monte Carlo and El Camino with a length of 28-7/16 inches and 26 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:
  • Fits GM 7.5″ in Monte Carlo and El Camino
  • 26 spline
  • 28 7/16″ long
See More

USA Standard Gear – Pinion Installation Kit For GM 8.5" Rear (Part No.60012)

Pinion Installation Kit For GM 8.5" Rear

from

$115.99
8.5″ GM PINION KIT .

Product Features:
  • Fits GM 8.5″ rear
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Yukon Gear – Master Overhaul Kit For GM 8.5" Rear Differential (Part No.14086)

Master Overhaul Kit For GM 8.5" Rear Differential

from

$284.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Supershims.

Product Features:
  • Fits GM 8.5″ rear
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design (Part No.41090)

Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design

from

$184.99
Yukon yoke for GM 7.5″ (mech 3R) in a triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 7.5″ and 7.625″
  • 27 spline
  • Mechanics 3R u-joint size
  • Inside snap ring design
  • 2.556″ snap ring span
  • 1.125″ cap diameter
  • Strap style
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

ATP – DIFF COVER KIT (Part No.111101)

DIFF COVER KIT

from

$35.99
DIFF COVER KIT

Needa Parts – Standard Engine Oil Drain Plug: M20-1.50 Thread, 17 mm Head (Sold by each) (Part No.090-040)

Standard Engine Oil Drain Plug: M20-1.50 Thread, 17 mm Head (Sold by each)

from

$4.99
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More

from

$4.99
3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:
  • Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
See More

FAG US – TAPERED ROLLER BEARI (Part No.KT5)

TAPERED ROLLER BEARI

from

$16.49
TAPERED ROLLER BEARI

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Oldsmobile 442 Drivetrains Categories

Helping You Find the Right Drivetrains for Your Oldsmobile 442

You love your 442. So we’ve made it easier than ever to help you find Oldsmobile 442 Drivetrains in our online catalog. Our inventory holds 448 aftermarket and OEM Drivetrains for your Oldsmobile 442, ranging from $1.99 to $1,704.99.

We offer parts from 22 brands trusted to make quality Drivetrains for your Oldsmobile 442. Before you buy, take some time to read through customer reviews. We currently have 20,526 reviews of Oldsmobile 442 Drivetrains from previous customers. Some of the top rated parts include Universal Joint with 4.4 stars and DIFFERENTIAL GASKET with 4.9 stars.

Find your 442 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Oldsmobile 442 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Oldsmobile 442

Our inventory holds Drivetrains for your Oldsmobile 442 from 22 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, Valvoline, and Driveworks, all of which can keep that Oldsmobile happy.
We have Mr. Gasket parts available for your Oldsmobile 442 in categories like Differentials. Some of the top-rated Mr. Gasket parts in these categories are:
Differential Gasket
from $18.09
(1)
Differential Gasket
Rear Differential Cover Gaskets
Differential Gasket
from $18.09
(1)
Differential Gasket
Rear Differential Cover Gaskets

FAQs for Oldsmobile 442 Drivetrains

What are the most purchased Drivetrains for the Oldsmobile 442?

Out of 448 Drivetrains for the Oldsmobile 442, the most popular in our inventory are:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets
Universal Joint
from $15.99
(52)
Universal Joint
U-Joints

What are the top-rated Oldsmobile 442 Drivetrains?

Top-rated Drivetrains for your Oldsmobile 442 based on customer reviews/ratings are:
Universal Joint
from $15.99
(65)
Universal Joint
“Good price and exact fit”
DIFFERENTIAL GASKET
from $7.99
(45)
DIFFERENTIAL GASKET
“Some say no need for a gasket and to use gasket sealer only its just as good. I like to make sure that the cover is installed properly to avoid any l”
Greaseable Super Strength Universal Joint
from $36.99
(41)
Greaseable Super Strength Universal Joint
“Easy install and great way to have sting durability with access to grease points”