Nissan Pulsar NX Steering and Chassis Parts
Top Nissan Pulsar NX Steering and Chassis Parts Categories
We carry over 79 Steering and Chassis Parts in inventory for the Nissan Pulsar NX. If you’re looking for aftermarket Steering and Chassis Parts for your Nissan Pulsar NX, check out all these categories:
Essential Nissan Pulsar NX Steering and Chassis Parts
Powercraft – Pump Seal Kit (Part No.8640)
from
$24.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – R & P Mounting Bushing (Part No.RP17671)
from
$83.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Insulates Rack & Pinion from Frame.
- Stabilizes Rack & Pinion
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Rare Parts – Rack & Pinion Bellows (Part No.RP26649)
from
$42.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Rare Parts – Control Arm W/ Ball Joint (Part No.RP10394)
from
$134.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1861)
from
$154.99
CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100 percent performance testing to ensure perfect fit, function and reliable performance.
- 100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$9.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Driveworks – Steering Tie Rod End (Part No.DW-ES2814RL)
from
$32.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
MOOG – Suspension Stabilizer Bar Link Kit (Part No.K750181)
from
$53.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
National – Multi-Purpose Bearing (Part No.A-15)
from
$18.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Rare Parts – CAM BOLT KIT (Part No.RP16745)
from
$48.99
CAM BOLT KIT
Rare Parts – Sway Bar Bushing (Part No.RP16136)
from
$23.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Powercraft – Rack Pinion Seal Kit (Part No.8667)
from
$90.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Remanufactured Power Steering Pump (Part No.21-5798)
from
$199.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100 percent tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Powercraft – Rack Pinion Seal Kit (Part No.9020)
from
$153.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Filter (Part No.20-0058F)
from
$50.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Driveworks – Camber Bolt Kit (Part No.DW-K90473)
from
$18.29
Camber Bolt Kit
Rare Parts – R & P Mounting Bushing (Part No.RP16490)
from
$32.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Insulates Rack & Pinion from Frame.
- Stabilizes Rack & Pinion
Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Female x 16mm Banjo (Part No.35963)
from
$187.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Driveworks – Camber Bolt Kit (Part No.DW-K9757)
from
$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Rare Parts – Tie Rod End (Part No.RP26578)
from
$32.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – CAM BOLT KIT (Part No.RP17632)
from
$55.99
CAM BOLT KIT
Rare Parts – Ball Joint (Part No.RP10642)
from
$39.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Nissan Pulsar NX Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Nissan Pulsar NX
You love your Pulsar NX. So we’ve made it easier than ever to help you find Nissan Pulsar NX Steering and Chassis Parts in our online catalog. Our inventory holds 79 aftermarket and OEM Steering and Chassis Parts for your Nissan Pulsar NX, ranging from $3.29 to $438.99.
We offer parts from 13 brands trusted to make quality Steering and Chassis Parts for your Nissan Pulsar NX. Before you buy, take some time to read through customer reviews. We currently have 4,333 reviews of Nissan Pulsar NX Steering and Chassis Parts from previous customers. Some of the top rated parts include Steering Tie Rod End with 4.4 stars and Camber Bolt Kit with 4.7 stars.
Find your Pulsar NX Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Nissan Pulsar NX part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Nissan Pulsar NX
Our inventory holds Steering and Chassis Parts for your Nissan Pulsar NX from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, DriveWorks, and Carquest Premium, all of which can keep that Nissan happy.
We have Carquest Premium parts available for your Nissan Pulsar NX in categories like Power Steering Parts. Some of the top-rated Carquest Premium parts in these categories are:
Top-Rated Imperial Steering and Chassis Parts
Leading Imperial Steering and Chassis Parts
We carry Imperial brand parts for your Nissan Pulsar NX across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
FAQs for Nissan Pulsar NX Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Nissan Pulsar NX?
Out of 79 Steering and Chassis Parts for the Nissan Pulsar NX, the most popular in our inventory are:
from
$8.79
This product is not rated
3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
What are the top-rated Nissan Pulsar NX Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Nissan Pulsar NX based on customer reviews/ratings are:
