from

$815.99

This alignment camber lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$57.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$14.99

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.

Product Features:

Rein boot kits come with all the needed hardware and components for the complete repair.
All components are manufactured to strict engineering standards/specifications in materials and tolerances
Rein also offers a full line of individual boots.
Matches original equipment design specifications

from

$202.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 26mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$33.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$468.99

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$14.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$19.99

Designed to fit a 22mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$104.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$131.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening

from

$55.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

GREASEABLE — Reduces bolt corrosion and allows for ease of future adjustments
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
ADJUSTABLE — Allows for camber and caster changes
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$359.99

CARDONE remanufactured Electrohydraulic Power Steering Pumps (EHPS) are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

During the engineering phase, every unit is tested to ensure perfect fit and function on the vehicle.
All critical components (campacs, armature, reservoir, etc.) are tested to match O.E. performance standards.
All units are built with 100 percent new, O.E.-quality O-rings, seals, bearings and gaskets.
Shafts and surfaces are machined to precise specifications to eliminate premature wear and extend product life.
Weak solder points are 100 percent reflowed to extend life expectancy.
To ensure reliable performance, final assembly is computer-tested to measure pressure, bypass, fluid flow, steering effort, current and noise.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$293.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$44.49

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Heat/abrasion tubing protects vital areas

from

$168.99

This power steering pump fan assembly is designed to match the fit, function and appearance of the original assembly on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this power steering pump fan assembly matches the fit, function and appearance of the factory assembly on specified years, make and models
Ideal solution – this assembly is a reliable replacement for an original assembly that is missing, damaged or has failed due to water or debris infiltration
Durable construction – this assembly is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$80.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$151.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$32.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$87.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$234.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Zinc coated tubes protect against rust and corrosion
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas

from

$69.99

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$81.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$186.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

KEEPS DIRT AND WATER OUT — Pre-installed dust boot seal provides an effective barrier against wear-causing contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
ADDED CORROSION PROTECTION — Specially-engineered coatings are applied to metal surfaces to inhibit premature deterioration caused by rain, snow, salt and road grime
ADDED CORROSION PROTECTIONá– Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
PREMIUM BUSHINGS — Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$197.99

Electrical parts control all aspects of vehicles on the road today. Replacing these components when they are starting to fail will ensure your vehicle has maximum performance and fuel economy. This is why Rein Automotive electrical parts are application specific and match the design and function of the OE parts.

Product Features:

Tested to ensure maximum performance
Manufactured to strict engineering standards/specifications in materials and tolerances
Long life and durability
Made by the OE manufacturer