2002 Mini Cooper Steering and Chassis Parts

Essential 2002 Mini Cooper Steering and Chassis Parts

MOOG – Stabilizer Bar Bushing Kit (Part No.K201512)

Stabilizer Bar Bushing Kit

from

$11.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

ZF – Power Steering Reservoir Cap (Part No.M2070442134ZF)

Power Steering Reservoir Cap

from

$12.52
Power Steering Reservoir Cap

Cardone – Power Steering Pump (Part No.1H-42336)

Power Steering Pump

from

$359.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Maval – Complete Steering Rack, Remanufactured (Part No.M1000326636MAV)

Complete Steering Rack, Remanufactured

from

$646.50
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

Rein – P/S Pump Cooling Fan (Part No.M2011423868RIN)

P/S Pump Cooling Fan

from

$220.24
P/S Pump Cooling Fan

Rein – Power Steering Reservoir (Part No.PSR0027)

Power Steering Reservoir

from

$24.99
Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Reservoir contains filter that is not-removable and reservoir must be replaced to keep power steering system functioning properly
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Rare Parts – Tie Rod Assembly (Part No.RP29233)

Tie Rod Assembly

from

$188.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with inner and outer tie rod ends
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Whiteline – Sway Bar 26Mm Heavy Duty (Part No.BMF72)

Sway Bar 26Mm Heavy Duty

from

$289.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 26mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Carquest Premium – Pressure Hose (Part No.40220)

Pressure Hose

from

$131.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
See More

Dorman – Suspension Control Arm (Part No.522-058)

Suspension Control Arm

from

$224.99
This alignment camber lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rein – Power Steering Rack Boot Kit (Part No.BKK0190)

Power Steering Rack Boot Kit

from

$13.49
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.

Product Features:
  • Rein boot kits come with all the needed hardware and components for the complete repair.
  • All components are manufactured to strict engineering standards/specifications in materials and tolerances
  • Rein also offers a full line of individual boots.
  • Matches original equipment design specifications
See More

Hutchinson – Sway Bar Bushing (Part No.L1050276482HUT)

Sway Bar Bushing

from

$6.62
Sway Bar Bushing

Carquest Premium – Molded Reservoir Hose (Part No.40451)

Molded Reservoir Hose

from

$44.49
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Heat/abrasion tubing protects vital areas
See More

Dorman – Alignment Camber / Toe Lateral Link (Part No.526-381)

Alignment Camber / Toe Lateral Link

from

$804.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Tie Rod End (Part No.ES800814)

Tie Rod End

from

$61.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation. 

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

MOOG – Ball Joint (Part No.K500110)

Ball Joint

from

$52.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Dorman – Lower Steering Shaft (Part No.425-750)

Lower Steering Shaft

from

$254.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:
  • Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
  • Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
  • Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
  • Corrosion resistant – salt spray testing and premium coating help ensure future longevity
See More

MOOG – Stabilizer Bar Link (Part No.K750879)

Stabilizer Bar Link

from

$33.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Incorporates proven design and engineering features
See More

Powercraft – Rack Pinion Seal Kit (Part No.9193)

Rack Pinion Seal Kit

from

$151.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rein – Blower Motor (Part No.ELB0150P)

Blower Motor

from

$184.99
Electrical parts control all aspects of vehicles on the road today. Replacing these components when they are starting to fail will ensure your vehicle has maximum performance and fuel economy. This is why Rein Automotive electrical parts are application specific and match the design and function of the OE parts.

Product Features:
  • Tested to ensure maximum performance
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Long life and durability
  • Made by the OE manufacturer
See More

MOOG – Ball Joint (Part No.K500111)

Ball Joint

from

$60.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

MOOG – Ball Joint (Part No.K500006)

Ball Joint

from

$66.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Rein – Power Steering Return Hose Assembly (Part No.PSH0139)

Power Steering Return Hose Assembly

from

$63.99
Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:
  • Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
  • Designed as direct-fit replacements to ensure trouble-free proper installation.
  • Complete with hardware and seals when necessary for installation to save installation time and additional costs.
  • Restores your vehicle to safe and optimal performance levels.
  • Replacing both pressure and return hoses together ensures optimal performance and safety levels.
See More

Rein – Power Steering Return Line Assembly (Part No.M2016309141RIN)

Power Steering Return Line Assembly

from

$88.52
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:
  • Original Equipment fit, form and function
  • Manufactured from premium raw materials
  • Premium OE design
  • Right fit the first time
  • For European vehicles
See More

2002 Mini Cooper Steering and Chassis Parts

You count on your 2002 Mini Cooper to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 60 Steering and Chassis Parts ranging in price from $2.97 to $804.99, you’re sure to find everything you need for your 2002 Mini Cooper.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 15 different brands like Cardone, Dorman, and Moog. 2002 Mini Cooper Steering and Chassis Parts start as low as $2.97!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 134 extensive product reviews on 2002 Mini Cooper Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Ball Joint with 5.0 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2002 Mini Cooper below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2002 Mini Cooper

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 Mini Cooper running right for years to come. In our inventory you’ll find brands like Cardone, Dorman, Moog, and even more.

Popular Dorman Steering and Chassis Parts

You’ll find popular Dorman brand products across Power Steering Parts. All are waiting to get your 2002 Mini Cooper back on the road. Some of the top-rated Dorman products in these categories are:
Remanufactured Power Steering Pump
from $474.99
(1)
Remanufactured Power Steering Pump
Power Steering Pumps

Top-Rated Cardone Steering and Chassis Parts


If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 2002 Mini Cooper, and some of our most reviewed Cardone parts include:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $46.99
(1)
Power Steering Filter
Power Steering Filters

FAQs for 2002 Mini Cooper Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2002 Mini Cooper?

Out of 60 Steering and Chassis Parts for the 2002 Mini Cooper, the most popular in our inventory are:
Power Steering Filter
from $31.99
This product is not rated
Power Steering Filter
Power Steering Filters
Suspension Control Arm
from $224.99
This product is not rated
Suspension Control Arm
Alignment Camber Lateral Links
Front Suspension Stabilizer Bar Link
from $49.99
(2)
Front Suspension Stabilizer Bar Link
Sway Bar Link Kits

What are the top-rated 2002 Mini Cooper Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2002 Mini Cooper based on customer reviews/ratings are:
Ball Joint
from $29.99
(2)
Ball Joint
“These Balls Joints are made in ITALY which means that they are very good quality and are available at an unbeatable price. just as good as the MOOG ba”