Mercury Mariner Serpentine and V Belts

Your One-Stop Shop For Trusted Mercury Mariner Serpentine and V Belts

If you’re in search of Mercury Mariner Serpentine and V Belts aftermarket or OEM parts, consider your search over! Advance Auto Parts carries 40 Serpentine and V Belts from top brands with prices ranging from $11.49 to $102.07.

Beyond great prices, we stock trusted brands manufacturing all types of Serpentine and V Belts for your Mercury Mariner. Of the 7 OEM and aftermarket parts brands we carry, some of the most popular are Dayco, Driveworks, and Motorcraft.

And don’t forget to read customer reviews across all Serpentine and V Belts categories in our catalog. Buy with confidence by leveraging past customer experiences of our aftermarket and OEM parts.

At Advance Auto Parts, we don’t think top quality Serpentine and V Belts have to cost top dollar, and we prove it. Browse our top Mercury Mariner Serpentine and V Belts below, order online to ship to your home, or head into your nearest Advance Auto Parts location to get started.

Essential Mercury Mariner Serpentine and V Belts

Dayco – Poly Rib Belt Serpentine Belt; 86.02 Long, 6 Rib Count (Part No.5060860)

Poly Rib Belt Serpentine Belt; 86.02 Long, 6 Rib Count

from

$33.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 85.5 Long, 6 Rib Count (Part No.855K6)

Poly Rib Belt Serpentine Belt; 85.5 Long, 6 Rib Count

from

$38.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Aramid Cord Poly Rib Belt Serpentine Belt; 86.02 Long, 6 Rib Count (Part No.A060860)

Aramid Cord Poly Rib Belt Serpentine Belt; 86.02 Long, 6 Rib Count

from

$55.99
The Dayco poly-V aramid belt is engineered to maintain a quiet, vibration-free belt drive system, especially for higher output OE engines that require an aramid belt. Unlike polyester-corded belts, this aramid cord belt is designed to resist the expected elongations, especially during high accessory loading. This unique feature of length stability and minimal stretch aids in difficult drives where span vibrations and tensioner movements are excessive. The Dayco aramid cord poly rib belt is built with Dayco’s specially designed EPDM rubber compounds to resist cracking and perform better under extreme temperature ranges.

Product Features:
  • Designed for applications with an OEM aramid belt and is specifically helpful for those with noise, vibration or harshness issues, or in-drive systems in which tensioner take-up is minimal
  • Length stability resists excessive span vibrations or tensioner movements
  • Features special compounds that resist cracking and perform well under intense engine temperatures 
See More

Driveworks – Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count (Part No.550K6)

Poly Rib Belt Serpentine Belt; 55 Long, 6 Rib Count

from

$15.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Stretch Serpentine Belt: 25 "Long, 3 Rib Count, Engineered For High Mileage (Part No.E030250)

Stretch Serpentine Belt: 25 "Long, 3 Rib Count, Engineered For High Mileage

from

$14.79
Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:
  • Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
  • Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
  • Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
  • These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060448)

Micro-V« Serpentine Drive Belt

from

$27.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth

from

$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (Part No.5060840K4)

Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set

from

$84.99
Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Engineered to match OE specifications with unique features that enhance vehicle performance and safety
  • For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
  • Provides all the parts needed in one box, helping simplify installation
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000117823BAN)

Multi Rib (Serpentine) Belt

from

$39.13
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000861605CON)

Multi Rib (Serpentine) Belt

from

$53.95
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W1000411636MTR)

Multi-Rib (Serpentine) Belt

from

$16.07
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
  • Laminated die-cut edge design provides quiet, efficient operation
  • Stands up to grease, oil, dirt and high temperatures
  • Flexes easily around the smallest pulley
  • Helps preserve belt strength
  • Helps eliminate rough edges present on cut-cog designed belts
  • Provides quiet operation
See More

Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W10001349480MTR)

Multi-Rib (Serpentine) Belt

from

$48.08
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
  • Laminated die-cut edge design provides quiet, efficient operation
  • Stands up to grease, oil, dirt and high temperatures
  • Flexes easily around the smallest pulley
  • Helps preserve belt strength
  • Helps eliminate rough edges present on cut-cog designed belts
  • Provides quiet operation
See More

Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W1000681342MTR)

Multi-Rib (Serpentine) Belt

from

$42.87
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
  • Laminated die-cut edge design provides quiet, efficient operation
  • Stands up to grease, oil, dirt and high temperatures
  • Flexes easily around the smallest pulley
  • Helps preserve belt strength
  • Helps eliminate rough edges present on cut-cog designed belts
  • Provides quiet operation
See More

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578713ACD)

Professional V-Ribbed Serpentine Belt

from

$102.07
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
  • Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
  • Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
  • Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
  • Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000848658BAN)

Multi Rib (Serpentine) Belt

from

$36.98
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Serpentine and V Belts Brands You Can Trust For Your Mercury Mariner

7 trusted brands of Serpentine and V Belts line our shelves, ready to help keep your Mercury Mariner running smooth. Below are some of the most popular brands and their top Serpentine and V Belts offerings:

Popular Motorcraft Serpentine and V Belts

Motorcraft products for the Mercury Mariner span several categories. Some of the highest-rated Motorcraft Serpentine and V Belts that will fit your Mercury Mariner are:
Multi-Rib (Serpentine) Belt
from $42.87
(1)
Multi-Rib (Serpentine) Belt
V-Belts

Top Mercury Mariner Serpentine and V Belts from Dayco

Your Mercury Mariner will be purring again thanks to Dayco brand Serpentine and V Belts available for online order or in-store pick up. Popular Dayco parts include:
Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count
from $50.99
(166)
Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count
from $28.99
(54)
Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count
Serpentine Belts

Most Purchased Mercury Mariner Serpentine and V Belts from Dayco

When you buy the most frequently purchased Dayco brand Serpentine and V Belts, you can be confident it will be the right part for your Mercury Mariner. Here are the Dayco Serpentine and V Belts Advanced Auto customers buy the most:
Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count
from $50.99
(166)
Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count
from $35.99
(81)
Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count
from $28.99
(54)
Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count
Serpentine Belts

FAQs for Mercury Mariner Serpentine and V Belts

What are the most purchased Serpentine and V Belts for the Mercury Mariner?

Out of 40 Serpentine and V Belts for the Mercury Mariner, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count
from $35.99
(81)
Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 86.02 Long, 6 Rib Count
from $33.49
(29)
Poly Rib Belt Serpentine Belt; 86.02 Long, 6 Rib Count
Serpentine Belts

What are the top-rated Mercury Mariner Serpentine and V Belts?

Top-rated Serpentine and V Belts for your Mercury Mariner based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 85.5 Long, 6 Rib Count
from $38.99
(37)
Poly Rib Belt Serpentine Belt; 85.5 Long, 6 Rib Count
“Go with this inexpensive unit…this does the job and simple to install.”
Poly Rib Belt Serpentine Belt; 85.5 Long, 6 Rib Count
from $64.99
(35)
Poly Rib Belt Serpentine Belt; 85.5 Long, 6 Rib Count
“Worked as designed”
Poly Rib Belt Serpentine Belt; 91.75 Long, 6 Rib Count
from $42.99
(33)
Poly Rib Belt Serpentine Belt; 91.75 Long, 6 Rib Count
“Wears well”