Mercedes-Benz ML350 Ignition and Tune-Up Products

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

• OE design ensures a tight boot seal that protects against moisture intrusion
• High temperature resistant material provides greater protection against thermal overload
• Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
• Engineered to the specifications used by the original vehicle manufacturer for an exact fit

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

• Provides excellent heat resistance as well as maximum protection against spark loss.
• Durable silicone compound for resistance to high heat or abrasion
• Spring included with the coil boot
• Design for direct compatibility
• OE design provides an exact fit for your application
• Multipack provides one time replace all COP for better deal

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

• PREMIUM GRADE SILICONE: Designed to withstand harsh environments
• OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
• Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
• We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
• Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
• We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:

• OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
• OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
• EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
• THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
• EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
• PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%

Product Features:

• Bosch OE quality knock sensors for optimum engine protection
• Bosch OE quality knock sensors improve combustion efficiency and reduce fuel consumption up to 9%
• Bosch OE quality knock sensors increase torque up to 5%
• Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
• Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
• Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

Opti-Layer Mag wire delivers maximum firing energy for a longer more powerful spark and optimum ignition performance. MAG core wire employ a spiral wound, magnetic firing core design. The Bosch MAG core is upgraded to premium by replacing standard metallic wire with a tightly wound low resistance stainless steel wire. Bosch MAG core provides a hotter, more powerful and longer spark resulting in optimum engine performance while reducing the chance for misfire and eliminating radio frequency static. Many Original Equipment Manufacturers continue to switch from conventional core construction to MAG core Bosch wire sets for all domestic and Asian cars, trucks, and SUVs are constructed using our premium MAG core technology. Bosch Premium Wire meet, and often exceed, the performance of the original equipment wires that they replace. The overall construction of the cable core, spark plug boots and outer jacket make Bosch ignition leads suitable for use with gasoline, LPG or alternative fuel engines.

Product Features:

• Precision engineered Opti-Layer Mag wire
• Mag delivers maximum firing energy for a longer more powerful spark and optimum ignition performance.
• 100% pure silicone jacket for ultimate lifetime performance.
• OE fit for easy installation
• Latest cable Opti-layer Mag technology using inductive core for better performance
• 100% silicone construction inner and outer insulating sheathing
• Class F cables with superior heat resistance up to 250C
• Ensures high performance whilst maintaining peak voltage to the spark plugs
• Exceeds International Standard ISO3808:2002(E) for High Voltage Ignition Cables
• Excellent RFI suppression and electrical conductivity properties
• High liner and tensile strength fiber glass reinforcing braid for longer life
• Resistance to aggressive under bonnet conditions of fuels and oils Installation Instructions: ( )

Opti-Layer Mag wire delivers maximum firing energy for a longer more powerful spark and optimum ignition performance. MAG core wire employ a spiral wound, magnetic firing core design. The Bosch MAG core is upgraded to premium by replacing standard metallic wire with a tightly wound low resistance stainless steel wire. Bosch MAG core provides a hotter, more powerful and longer spark resulting in optimum engine performance while reducing the chance for misfire and eliminating radio frequency static. Many Original Equipment Manufacturers continue to switch from conventional core construction to MAG core Bosch wire sets for all domestic and Asian cars, trucks, and SUVs are constructed using our premium MAG core technology. Bosch Premium Wire meet, and often exceed, the performance of the original equipment wires that they replace. The overall construction of the cable core, spark plug boots and outer jacket make Bosch ignition leads suitable for use with gasoline, LPG or alternative fuel engines.

Product Features:

• Precision engineered Opti-Layer Mag wire
• Mag delivers maximum firing energy for a longer more powerful spark and optimum ignition performance.
• 100% pure silicone jacket for ultimate lifetime performance.
• OE fit for easy installation
• Latest cable Opti-layer Mag technology using inductive core for better performance
• 100% silicone construction inner and outer insulating sheathing
• Class F cables with superior heat resistance up to 250C
• Ensures high performance whilst maintaining peak voltage to the spark plugs
• Exceeds International Standard ISO3808:2002(E) for High Voltage Ignition Cables
• Excellent RFI suppression and electrical conductivity properties
• High liner and tensile strength fiber glass reinforcing braid for longer life
• Resistance to aggressive under bonnet conditions of fuels and oils Installation Instructions: ( )

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
• Advanced anti-wear technology provides maximum protection to gears and bearings

The new ceramic high-temperature glow plug (NHTC glow plug, New High Temperature Ceramic) has a fully ceramic heating element. It reaches an operating temperature of 1000C in two seconds and can afterglow for up to ten minutes at temperatures up to 1350C. That means: It glows in push phases or during the regeneration phase of the particle filter and thereby minimizes the particle emissions during this time. The NHTC ceramic glow plug was specially developed by NGK to enable automobile manufacturers to comply with the Euro 4 and Euro 5 emissions standards. One of the goals of these standards is to reduce the compression ratio in diesel engines. NHTC glow plugs reach a temperature of 1,000C in less than two seconds and can after-glow for more than ten minutes at temperatures of up to 1,350C. Optimal combustion is assured even with low compression ratios. In addition, the NHTC glow plug can glow intermediately to prevent cooling of the particle filter in deceleration phases. Ceramic glow plugs from NGK guarantee a long service life and ensure a reliable and fast ignition, even at the lowest outside temperatures. At the same time, they reduce harmful emissions.

NGK manufactures all types of glow plugs featuring the latest in technology Worldwide restrictions on automotive exhaust gas emission and the promotion of low pollution vehicles are a reflection of our awareness of the need to protect our environment. Not surprisingly, manufacturers of diesel-powered vehicles are hard at work developing new technology designed to meet increasing restriction on exhaust emissions. Although glow plugs were originally developed as a method for improving the starting performance of diesel engines, technology has developed to the point where glow plugs also contribute to the reduction of exhaust gas emissions.

The new ceramic high-temperature glow plug (NHTC glow plug, New High Temperature Ceramic) has a fully ceramic heating element. It reaches an operating temperature of 1000C in two seconds and can afterglow for up to ten minutes at temperatures up to 1350C. That means: It glows in push phases or during the regeneration phase of the particle filter and thereby minimizes the particle emissions during this time. The NHTC ceramic glow plug was specially developed by NGK to enable automobile manufacturers to comply with the Euro 4 and Euro 5 emissions standards. One of the goals of these standards is to reduce the compression ratio in diesel engines. NHTC glow plugs reach a temperature of 1,000C in less than two seconds and can after-glow for more than ten minutes at temperatures of up to 1,350C. Optimal combustion is assured even with low compression ratios. In addition, the NHTC glow plug can glow intermediately to prevent cooling of the particle filter in deceleration phases. Ceramic glow plugs from NGK guarantee a long service life and ensure a reliable and fast ignition, even at the lowest outside temperatures. At the same time, they reduce harmful emissions.

Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

• 0.6 mm finewire design improves ignitability
• Patented V-trimmed platinum sidewire technology resists wear
• OE equivalent design is engineered for every engine
• Designed for better overall durability with virtually no gap erosion

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

• Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
• Multi-rib insulator reduces danger of “flash-over”
• One-piece terminal post adds strength
• Resistor reduces radio frequency interference (RFI) and electrode erosion

The ground electrode is cut-back from the center electrode to provide a gap. The face of the ground electrode is concave to provide a constant gap to the center electrode. This plug is designed use in all aftermarket cylinder heads used in different types of racing venues including oval and road racing.

Product Features:

• Opens spark face for better ignitability of flame kernel
• Retains less heat, transfers heat to shell faster – reduces risk of pre-ignition
• Dyno testing has shown proven power gains
• Cut-back ground electrode evolved from practice of grinding back the side electrode

Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:

• Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
• Platinum ground electrode for extended life
• DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
• Sustained spark performance over 100,000 miles
• Lasts up to three times as long as conventional plugs
• Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
• Iridium Long Life

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain Europ

Product Features:

• PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
• BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
• STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
• CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier