2015 Mercedes-Benz ML350 Ignition and Tune-Up Products
Find Your Specific 2015 Mercedes-Benz ML350 Ignition and Tune-Up Products
Below you will find various in-demand Mercedes-Benz Ignition and Tune-Up Products, components and accessories for your 2015 ML350. Advance Auto Parts has popular ML350 parts like Glow Plugs, Spark Plugs, Ignition Coils and Boots and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other ML350 model years including
2006,
2007,
2008,
2009,
2010,
2011,
2012,
2013,
2014 and more. Select a category of 2015 Mercedes-Benz ML350 Ignition and Tune-Up Products below and start saving instantly.
Popular 2015 Mercedes-Benz ML350 Ignition and Tune-Up Products Categories
Essential Ignition and Tune-Up Products for 2015 Mercedes-Benz ML350s
Delphi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005434205DEL)
from
$62.96
Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.
Product Features:
See More
Product Features:
- Improved dwell accuracy decreases module and coil temperatures for greater reliability
- Noise abatement material between laminations reduces audible coil noise
- Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
- Lower primary inductance provides high-speed performance
- Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
- Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
- Direct connection to spark plugs (via small boot) eliminates spark plug wires
- Composite iron coils provide programmable energy
- Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
- Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
- Radio frequency interference (RFI)suppressor optional
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48921)
from
$53.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Bosch – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.0986221058)
from
$91.99
Benefits of Bosch original equipment quality ignitions coils include the right ignition voltage, long lasting spark, better engine running conditions, lower fuel consumption, and reduced exhaust emissions.
Product Features:
See More
Product Features:
- Meets or exceeds OEM specification
- Ensures reliable voltage for smooth engine performance
Delphi – Ignition Coil (Part No.GN10756)
from
$97.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Bosch – High-Performance Direct Ignition Coil for Maximum Engine Performance (Part No.F3005100750BOS)
from
$43.96
High-performance ignition coils from Bosch guarantee a reliable voltage from the start, more ignition energy to ensure that your engine starts and runs smoothly. Bosch ignition systems combine the security of fully developed system engineering with the employment of the latest technology. The application of Bosch ignition coils ensures all advantages of the original equipment. Bosch Ignition coils provide more ignition energy to ensure that your engine starts well and runs smoothly. High-performance ignition coils from Bosch guarantee a reliable voltage from the start.
Product Features:
See More
Product Features:
- Demand controlled ignition voltage
- Long spark duration
- Better engine performance
- Reduced fuel consumption
- Reduced obnoxious emissions in exhaust gas
Delphi – IGNITION COIL (Part No.GN10235)
from
$92.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Delphi – Ignition Coil (Part No.GN10361)
from
$53.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBE1251)
from
$57.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1022)
from
$69.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
NGK – OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, IFR5E11 (Part No.7994)
from
$18.99
NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
- Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance and reliability.
- Optimized for OE Applications: Engineered specifically for Original Equipment (OE) applications, ensuring a perfect fit and optimal performance.
- Even Wear: Features a platinum pad on the ground electrode, designed for even wear in distributorless ignition systems.
- Fine Wire Tip Design: The fine wire tip design of the IFR5E11 model enhances ignition efficiency and performance.
- Fine Wire Tip Design: The fine wire tip design of the IFR7X7G model ensures efficient and consistent spark delivery for optimal engine performance.
Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP3924)
from
$4.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.
Product Features:
See More
Product Features:
- High nickel alloy side electrode maintains precise gap
- Full platinum tip assures virtually no gap erosion for long life
- Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16PR-L11 (Part No.3395)
from
$15.49
Manufactured to the strictest OE performance, durability and emissions standards.
Product Features:
See More
Product Features:
- Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
- Platinum ground electrode for extended life
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Sustained spark performance over 100,000 miles
- Lasts up to three times as long as conventional plugs
- Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
- Iridium Long Life
- Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced design and materials used in the DENSO Iridium Long Life plug.
- Fuel Efficiency: This spark plug not only boosts engine performance but also helps in better conservation of fuel, making it an economical choice for long-term use.
Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP3924)
from
$6.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.
Product Features:
See More
Product Features:
- Works to optimize engine performance for a longer life and improved fuel economy
- OE design
- Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
- Platinum ball welding process provides a consistent point of contact for enhanced adhesion
Motorcraft – High-Performance Spark Plug: Enhances Fuel Efficiency (Part No.SP-497-X)
from
$7.49
Engineered for superior ignition performance, the Motorcraft High-Performance Spark Plug is designed to optimize fuel efficiency and ensure reliable starts. Crafted with precision, this spark plug offers exceptional durability and consistent performance, making it an ideal choice for maintaining your vehicle’s peak performance. Trust Motorcraft for quality and dependability in every drive.
Product Features:
See More
Product Features:
- Enhances Fuel Efficiency: Engineered to optimize fuel efficiency, ensuring you get the most out of every gallon.
- Superior Ignition Performance: Designed for reliable starts and consistent performance, providing peace of mind on every drive.
- Exceptional Durability: Crafted with precision to withstand the demands of high-performance engines, ensuring long-lasting use.
- Consistent Performance: Maintains your vehicle’s peak performance, making it an ideal choice for regular maintenance.
- Quality and Dependability: Trust Motorcraft for high-quality spark plugs that deliver dependable performance in every drive.
- Enhances Fuel Efficiency: Engineered to optimize fuel efficiency, ensuring you get the most out of every gallon.
- Superior Ignition Performance: Designed for reliable starts and consistent performance, providing peace of mind on every drive.
- Exceptional Durability: Crafted with precision to withstand the demands of high-performance engines, ensuring long-lasting use.
- Consistent Performance: Maintains your vehicle’s peak performance, making it an ideal choice for regular maintenance.
- Quality and Dependability: Trust Motorcraft for high-quality spark plugs that deliver dependable performance in every drive.
DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, K16PR-U11 (Part No.3130)
from
$2.99
The unique U-Groove ground electrode is one of the finest features of DENSO spark plugs. The electrode was developed to meet the demand for improved ignitability, necessary for increased efficiency in emission gas purification and fuel consumption.
Product Features:
See More
Product Features:
- Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
- Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Lasts twice as long as most conventional plugs
- 100% pre-fired to assure reliable operation
- U-Groove Conventional
Champion – Copper Plus Spark Plug RC12YC: Dependable Performance & Durability (Part No.71)
from
$4.99
This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for reliable performance. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the spark plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel copper alloy center electrode tip and flat seat type further enhance its reliability, making it a top choice for consistent engine performance.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
- Built to ISO and SAE standards for proven performance
- Reliable Engine Performance: Featuring a nickel copper alloy center electrode tip and flat seat type, this spark plug ensures consistent and reliable engine performance.
Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP3924)
from
$9.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.
Product Features:
See More
Product Features:
- 0.6 mm finewire design improves ignitability
- Patented V-trimmed platinum sidewire technology resists wear
- OE equivalent design is engineered for every engine
- Designed for better overall durability with virtually no gap erosion
DENSO – Iridium Long Life Spark Plug (Part No.F100046526ND)
from
$19.03
The DENSO Iridium Long Life spark plug was specifically designed for long service life and consistent performance in the latest, most advanced production cars DENSO’s patented iridium alloy is more durable than even platinum, allowing the center electrode to be shrunk to only 0.7mm in diameter. This produces a dramatic improvement in ignitability and spark plug life. Closely related to platinum and exhibiting even tougher qualities, the rare metal iridium is an ideal material for spark plugs. A fine-wire, 0.7mm iridium center electrode is 360-degree laser welded in place using an exclusive DENSO process, and then matched to a platinum ground electrode. This pair of precision-formed, premium-metal electrodes dramatically extends the plug’s useful life.
Product Features:
See More
Product Features:
- Fine-wire iridium center electrode
- Platinum ground electrode
- 360 degree laser-welded spark tip
- Sustained spark performance over 100,000 miles
- Withstands higher pressures and temperatures
NGK – Ceramic Glow Plug: New Ceramic High Temperature Type, CZ551 (Part No.92340)
from
$29.99
NGK’s patented NHTC (New High Temperature Ceramic) glow plugs were developed for OEM diesel engine manufacturers to comply with ever-stricter emissions standards. Compared to metal glow plugs, NHTC glow plugs have a more robust, fully ceramic heating element which is encased in a ceramic insulator. NGK NHTC glow plugs reach operating temp of 1,000 degrees C in less than 2 seconds and can after-glow for more than 10 minutes at temps of up to 1,350 degrees C. Silicon nitrate ceramic material, combined with optimized shape and joining process provide superior thermal shock and vibration resistance, ensuring stable engine starts. Fine ceramic heater provides durability in high-temperature conditions, improves combustion and reduces emissions.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction ceramic glow plug
- PATENTED TECHNOLOGY: Exclusive NHTC New Ceramic High Temperature design
- NEAR-INSTANT HEATING: Fully ceramic heating element reaches operating temperature in less than two seconds
- CLEAN PERFORMANCE: Constant afterglow temperature minimize noxious pollutants
- RECOMMENDED USAGE: Best for diesel engines with OE ceramic glow plugs
NGK – Ceramic Glow Plug: New Ceramic High Temperature Type, CZ303 (Part No.9970)
from
$44.99
NGK’s patented NHTC (New High Temperature Ceramic) glow plugs were developed for OEM diesel engine manufacturers to comply with ever-stricter emissions standards. Compared to metal glow plugs, NHTC glow plugs have a more robust, fully ceramic heating element which is encased in a ceramic insulator. NGK NHTC glow plugs reach operating temp of 1,000 degrees C in less than 2 seconds and can after-glow for more than 10 minutes at temps of up to 1,350 degrees C. Silicon nitrate ceramic material, combined with optimized shape and joining process provide superior thermal shock and vibration resistance, ensuring stable engine starts. Fine ceramic heater provides durability in high-temperature conditions, improves combustion and reduces emissions.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction ceramic glow plug
- PATENTED TECHNOLOGY: Exclusive NHTC New Ceramic High Temperature design
- NEAR-INSTANT HEATING: Fully ceramic heating element reaches operating temperature in less than two seconds
- CLEAN PERFORMANCE: Constant afterglow temperature minimize noxious pollutants
- RECOMMENDED USAGE: Best for diesel engines with OE ceramic glow plugs
NGK – Ceramic Glow Plugs (Part No.F1100464957NGK)
from
$52.60
The new ceramic high-temperature glow plug (NHTC glow plug, New High Temperature Ceramic) has a fully ceramic heating element. It reaches an operating temperature of 1000C in two seconds and can afterglow for up to ten minutes at temperatures up to 1350C. That means: It glows in push phases or during the regeneration phase of the particle filter and thereby minimizes the particle emissions during this time. The NHTC ceramic glow plug was specially developed by NGK to enable automobile manufacturers to comply with the Euro 4 and Euro 5 emissions standards. One of the goals of these standards is to reduce the compression ratio in diesel engines. NHTC glow plugs reach a temperature of 1,000C in less than two seconds and can after-glow for more than ten minutes at temperatures of up to 1,350C. Optimal combustion is assured even with low compression ratios. In addition, the NHTC glow plug can glow intermediately to prevent cooling of the particle filter in deceleration phases. Ceramic glow plugs from NGK guarantee a long service life and ensure a reliable and fast ignition, even at the lowest outside temperatures. At the same time, they reduce harmful emissions.
See More
NGK – Ceramic Glow Plugs (Part No.F110088273NGK)
from
$70.75
The new ceramic high-temperature glow plug (NHTC glow plug, New High Temperature Ceramic) has a fully ceramic heating element. It reaches an operating temperature of 1000C in two seconds and can afterglow for up to ten minutes at temperatures up to 1350C. That means: It glows in push phases or during the regeneration phase of the particle filter and thereby minimizes the particle emissions during this time. The NHTC ceramic glow plug was specially developed by NGK to enable automobile manufacturers to comply with the Euro 4 and Euro 5 emissions standards. One of the goals of these standards is to reduce the compression ratio in diesel engines. NHTC glow plugs reach a temperature of 1,000C in less than two seconds and can after-glow for more than ten minutes at temperatures of up to 1,350C. Optimal combustion is assured even with low compression ratios. In addition, the NHTC glow plug can glow intermediately to prevent cooling of the particle filter in deceleration phases. Ceramic glow plugs from NGK guarantee a long service life and ensure a reliable and fast ignition, even at the lowest outside temperatures. At the same time, they reduce harmful emissions.
See More
Upgrade your 2015 Mercedes-Benz ML350 with Top-Quality Ignition and Tune-Up Products
When it comes to maintaining or upgrading your 2015 Mercedes-Benz ML350, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your ML350 functioning at its best. At Advance Auto Parts, we offer a wide selection of 10 Ignition and Tune-Up Products for the 2015 Mercedes-Benz ML350, designed to meet your needs without breaking the bank.
From
Glow Plug
replacements to
Spark Plugs
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2015 Mercedes-Benz ML350 at great prices.
Our Ignition and Tune-Up Products inventory for this model
ranges from just $6.99 to $117.22, with
an average price of $60.38.
Our 10 Ignition and Tune-Up Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 2015 Mercedes-Benz ML350 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2015 Mercedes-Benz ML350 is always ready to roll. We’re committed to providing you with everything you need to keep your ML350 in top shape, all in one place.
Start shopping confidently below for your 2015 Mercedes-Benz ML350!
Best-Selling Glow Plugs for 2015 Mercedes-Benz ML350s
Enhance the driving experience in your Mercedes-Benz with 1 quality Glow Plug components, starting at $52.60.
NGK – Ceramic Glow Plugs (Part No.F1100464957NGK)
from
$52.60
The new ceramic high-temperature glow plug (NHTC glow plug, New High Temperature Ceramic) has a fully ceramic heating element. It reaches an operating temperature of 1000C in two seconds and can afterglow for up to ten minutes at temperatures up to 1350C. That means: It glows in push phases or during the regeneration phase of the particle filter and thereby minimizes the particle emissions during this time. The NHTC ceramic glow plug was specially developed by NGK to enable automobile manufacturers to comply with the Euro 4 and Euro 5 emissions standards. One of the goals of these standards is to reduce the compression ratio in diesel engines. NHTC glow plugs reach a temperature of 1,000C in less than two seconds and can after-glow for more than ten minutes at temperatures of up to 1,350C. Optimal combustion is assured even with low compression ratios. In addition, the NHTC glow plug can glow intermediately to prevent cooling of the particle filter in deceleration phases. Ceramic glow plugs from NGK guarantee a long service life and ensure a reliable and fast ignition, even at the lowest outside temperatures. At the same time, they reduce harmful emissions.
See More
Most Popular 2015 Mercedes-Benz ML350 Spark Plugs
Customize your Mercedes-Benz with 4 Spark Plugs products
like Spark Plugs, all
priced under $27.49.
Champion – Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RERX4PMPB (Part No.7426)
from
$6.99
Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RERX4PMPB
NGK – OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SILZKFR8D7S (Part No.95875)
from
$27.49
NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Laser Iridium High Ignitability spark plugs feature raised platinum pad or platinum fine wire tip on the ground electrode for even wear in distributorless ignition systems and improved spark performance.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: SPE tip & iridium alloy center electrode produce the most advanced OE spark plug technology
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- SPE DESIGN: Square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE SPE iridium alloy plugs
NGK – Maximize Engine Performance with High Ignitability Spark Plug (Part No.96427)
from
$23.99
NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and dur
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: PSPE tip and iridium alloy center electrode produce the most advanced OE spark plug technology
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE PSPE iridium alloy plugs
Bosch – Super Plus Spark Plug: Long Lasting Copper Core, 50% longer than OE (Part No.F1000570862BOS)
from
$20.90
The Bosch Super Plus Spark Plug utilizes an yttrium enhanced copper core center electrode, making it one of the longest lasting copper core spark plug on the market – by 50% versus even OE plugs. Bosch Super Plus also features a tapered, v-profile ground electrode for improved cold starts and better fuel ignitability. Center Electrode Core Material: Nickel-Yttrium and Copper – Center Electrode Tip Material: Nickel-Yttrium – Ground Electrode Tip Material: Nickel-Chromium
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- Heavy-duty yttrium-enhanced copper core center electrode.
- Tapered, v-profile nickel chromium ground electrode.
- Nickel-plated rolled threads.
- Metal glass fused resistor.
- Angular, five-ribbed insulator design.
- Electrode gap is factory set and never requires adjustment.
- Anti-seize and corrosion protection. Bosch Super Plus Spark Plugs deliver quality performance based on technology that’s proven on racetracks around the world in the most sophisticated racing engines
Top Picks for 2015 Mercedes-Benz ML350 Ignition Coils and Boots
Upgrade Mercedes-Benz ML350s with top-quality Ignition Coils and Boots parts, including 5 OEM and aftermarket selections for your 2015 model.
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBE1157)
from
$85.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Delphi – Ignition Coil (Part No.GN10756)
from
$97.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Worldpac – DIRECT IGNITION COIL (Part No.F30052410625BRM)
from
$117.22
DIRECT IGNITION COIL
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1323)
from
$85.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBE1251)
from
$57.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
FAQs for 2015 Mercedes-Benz ML350 Ignition and Tune-Up Products
Which Ignition and Tune-Up Products are best-sellers for 2015 Mercedes-Benz ML350s?
Out of 10 Ignition and Tune-Up Products that fit 2015 Mercedes-Benz ML350s, the following parts are the top sellers:
- Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RERX4PMPB (11979438) – $6.99
- Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (12413283) – $85.99
- Ignition Coil (11892415) – $97.99
What’s the price range for 2015 Mercedes-Benz ML350 Ignition and Tune-Up Products?
Ignition and Tune-Up Product prices for the 2015 Mercedes-Benz ML350 start at $6.99 and go up to $117.22 for the most premium parts.
What’s the average price of a Ignition and Tune-Up Product for a 2015 Mercedes-Benz ML350?
The average price for Ignition and Tune-Up Products for the 2015 Mercedes-Benz ML350 is $60.38. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Ignition and Tune-Up Products for other Mercedes-Benz ML350 model years?
What are the cheapest Ignition and Tune-Up Products for my 2015 Mercedes-Benz ML350?
The cheapest 2015 Mercedes-Benz ML350 Ignition and Tune-Up Products we carry in stock are:
- Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RERX4PMPB (11979438) – $6.99
- Super Plus Spark Plug: Long Lasting Copper Core, 50% longer than OE (11193768) – $20.90
- Maximize Engine Performance with High Ignitability Spark Plug (50014507) – $23.99
- OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SILZKFR8D7S (11510870) – $27.49
- Ceramic Glow Plugs (11582790) – $52.60
What types of Ignition and Tune-Up Products do you sell for my 2015 Mercedes-Benz ML350?
As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2015 Mercedes-Benz ML350:
Can I get help with 2015 Mercedes-Benz ML350 Ignition and Tune-Up Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Ignition and Tune-Up Products and more.
What is your return policy for Mercedes-Benz ML350 Ignition and Tune-Up Products?
Advance Auto Parts keeps returns simple. For new Mercedes-Benz ML350 Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
