Mercedes-Benz 300TE Cooling and Climate Controls

Essential Mercedes-Benz 300TE Cooling and Climate Controls

Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13496)

Standard Thermostat: 160 Degrees

from

$21.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Blower Motor: With Wheel (Part No.76975)

Blower Motor: With Wheel

from

$156.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1249)

Temperature Sender With Gauge

from

$18.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-643)

Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement

from

$60.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

APA/URO Parts – APA/URO Blower Motor (Part No.R203150546APA)

APA/URO Blower Motor

from

$232.58
APA/URO manufactures a high quality replacement Blower Motor that meets or exceeds the vehicle manufacturer’s specifications for fit, durability and quality.

Product Features:
  • OE-Equivalent.
  • Direct Fit Replacement.
  • High quality OE electrical components.
  • OE quality brushes and bearings.
  • Balanced rotor assembly.
See More

National – Bearings (Part No.5000-KFF)

Bearings

from

$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Behr – Radiator Drain Plug (Part No.G106011756BEH)

Radiator Drain Plug

from

$11.09
Radiator Drain Plug

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Cap-Expansion Tank

from

$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Behr – BEHR A/C Condenser (Part No.R103034566BEH)

BEHR A/C Condenser

from

$183.54
BEHR manufactures an OE-equivalent direct fit A/C Condenser that guarantees the same high quality, fit and performance of the OEM A/C condenser it replaces. BEHR produces brazed flat-tube condensers, delivering high power in spite of their small package size. This ensures rapid cooling of the vehicle cabin, thanks to optimum matching of heat transfer and pressure drop on the coolant side and air side.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Advanced technology parallel flow, sub cool and serpentine design.
  • Provides the fit, quality and performance of the original equipment.
  • compliant for both R12 and R134A refrigerants.
See More

Programa – HVAC Control Module (Part No.R205949490PRO)

HVAC Control Module

from

$384.30
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:

Product Features:
  • Complete visual inspection.
  • Boards and components are repaired or replaced.
  • Any test that fails to meet OEM specifications is repaired or replaced.
  • Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
See More

Factory Air – Sealing Washer Kit (Part No.24336)

Sealing Washer Kit

from

$12.29
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Dorman – 5-Wire Style Relay (Part No.85170)

5-Wire Style Relay

from

$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Febi – Bilstein Engine Cooling Fan Blade (Part No.G505014303FEB)

Bilstein Engine Cooling Fan Blade

from

$68.02
The Febi/Bilstein Engine Cooling Fan Blade is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

KAI – A/C Expansion Valve, L6 Engine (Part No.ACX011004)

A/C Expansion Valve, L6 Engine

from

$33.99
New Standard Replacement A/C Expansion Valve, L6 Engine

Product Features:
  • L6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Universal Reverse Rotation Thermal Standard Duty Fan Clutch (Part No.215075)

Universal Reverse Rotation Thermal Standard Duty Fan Clutch

from

$103.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Dorman – Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle (Part No.902-943)

Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle

from

$43.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUE1481)

HVAC Blower Motor Resistor

from

$809.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Behr – A/C Temp. Switch (Part No.R105529376BEH)

A/C Temp. Switch

from

$40.85
A/C Temp. Switch

MAHLE Original – Thermostat (Part No.C31633)

Thermostat

from

$2.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Hella – Coolant Level Sensor (Part No.G105016387HEL)

Coolant Level Sensor

from

$38.56
Coolant Level Sensor

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1481)

Coolant Temperature Sensor

from

$56.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Helping You Find the Right Cooling and Climate Controls for Your Mercedes-Benz 300TE

You love your 300TE. So we’ve made it easier than ever to help you find Mercedes-Benz 300TE Cooling and Climate Controls in our online catalog. Our inventory holds 95 aftermarket and OEM Cooling and Climate Controls for your Mercedes-Benz 300TE, ranging from $0.62 to $809.99.

We offer parts from 27 brands trusted to make quality Cooling and Climate Controls for your Mercedes-Benz 300TE. Before you buy, take some time to read through customer reviews. We currently have 7,219 reviews of Mercedes-Benz 300TE Cooling and Climate Controls from previous customers. Some of the top rated parts include Cap & Valve A/C System Seal Kit with 4.2 stars and Radiator Cap: 20 PSI with 5.0 stars.

Find your 300TE Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz 300TE part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your Mercedes-Benz 300TE

Our inventory holds Cooling and Climate Controls for your Mercedes-Benz 300TE from 27 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Carquest Premium, and Factory Air, all of which can keep that Mercedes-Benz happy.
We have MAHLE Original parts available for your Mercedes-Benz 300TE in categories like Engine Cooling Parts. Some of the top-rated MAHLE Original parts in these categories are:
Thermostat
from $2.49
(1)
Thermostat
Thermostat Housing Gaskets

Top-Rated Permatex Cooling and Climate Controls

Leading Permatex Cooling and Climate Controls

We carry Permatex brand parts for your Mercedes-Benz 300TE across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for Mercedes-Benz 300TE Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the Mercedes-Benz 300TE?

Out of 95 Cooling and Climate Controls for the Mercedes-Benz 300TE, the most popular in our inventory are:
Radiator Cap: 20 PSI
from $8.79
(16)
Radiator Cap: 20 PSI
Radiator Caps
Standard Thermostat: 192 Degrees
from $25.99
(49)
Standard Thermostat: 192 Degrees
Thermostats
Standard Thermostat: 180 Degrees
from $24.99
(8)
Standard Thermostat: 180 Degrees
Thermostats

What are the top-rated Mercedes-Benz 300TE Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your Mercedes-Benz 300TE based on customer reviews/ratings are:
Cap & Valve A/C System Seal Kit
from $16.99
(6)
Cap & Valve A/C System Seal Kit
“Good product and price.”
Radiator Cap: 20 PSI
from $9.49
(3)
Radiator Cap: 20 PSI
“Great”
Engine Water Pump: New, Gasket/Seals Included
from $106.99
(3)
Engine Water Pump: New, Gasket/Seals Included
“Works well and was a good price. Although it took 6 hours to install. Be handy and have 1/4″ and 3/8″ swivels and extensions and 13mms sockets and a m”