from

$2145.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$4.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$30.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$44.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$54.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$13.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$257.99

This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

Does not include steels or filter

from

$41.99

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

Delphi sensors are built to meet or exceed OE requirements and testing
Delphi has improved the OE design by plating the connectors to help prevent corrosion and failure commonly caused by internal and cable short circuits
Delphi’s OE design helps by preventing mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
Speed sensors maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection
Designed digital output for maximum signal to noise ratio

from

$10.79

Product Features:

Brand may vary by location

from

$27.99

AT SEAL DRIVE AXLE

from

$33.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$8.87

Diff. Side Cover Sea

from

$5.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$106.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$4.27

Input Shaft Seal

from

$47.84

Engine Mount

from

$23.29

Product Features:

Transmission line fitting kit
Ford; 5/8″-18 inverted flare, deep thread
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Hose clamps required

from

$8.79

Product Features:

Brand may vary by location

from

$30.29

AT Output Shaft Spee

from

$36.99

CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:

Lifecycle tested to meet or exceed OE specifications
Direct OE replacement
High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
Global coverage for import and/or domestic applications.

from

$183.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features: