Mazda RX-2 Transmission Parts
Top Mazda RX-2 Transmission Parts Categories
We carry over 26 Transmission Parts in inventory for the Mazda RX-2. If you’re looking for aftermarket Transmission Parts for your Mazda RX-2, check out all these categories:
Essential Mazda RX-2 Transmission Parts
National – Bearings (Part No.32008)
from
$36.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.32207)
from
$34.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-30205)
from
$13.29
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
National – Bearings (Part No.304)
from
$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)
from
$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.
Product Features:
See More
Product Features:
- Designed specially for high-torque and high vibration applications
- Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
- OEM specified
- Low-odor, non-corrosive formula
- Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)
from
$17.49
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 90 minutes
National – Shaft Repair Sleeve (Part No.99169)
from
$24.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.2025)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Anchor – Transmission Mount: Rear, 1 Piece (Part No.8095)
from
$17.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to MAZDA 77-93;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1977-1993
- Weight approx: 1 Lbs
National – Bearings (Part No.307-L)
from
$39.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.306-L)
from
$42.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Imperial – High Performance Transmission Oil Cooler (Part No.240514)
from
$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)
from
$80.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$67.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)
from
$59.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 6″
- Sub-compact to compact cars
- GVWR up to 18,000 lbs.
- Compatible with OEM cooler systems
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)
from
$39.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 12-1/2″
- Sub-compact to compact cars
- GVWR up to 12,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-30)
from
$24.99
Fully adjustable vacuum modulator to maintain accurate shift points.
Product Features:
See More
Product Features:
- Meets or exceeds OE fit, form and function
Carquest Premium – Automatic Transmission Modulator Valve (Part No.VMA1002)
from
$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ATP – AT MODULATOR VALVE (Part No.NX-2)
from
$24.99
AT MODULATOR VALVE
Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-29)
from
$39.99
Fully adjustable vacuum modulator to maintain accurate shift points.
Product Features:
See More
Product Features:
- Meets or exceeds OE fit, form and function
Mazda RX-2 Transmission Parts Categories
Helping You Find the Right Transmission Parts for Your Mazda RX-2
You love your RX-2. So we’ve made it easier than ever to help you find Mazda RX-2 Transmission Parts in our online catalog. Our inventory holds 26 aftermarket and OEM Transmission Parts for your Mazda RX-2, ranging from $7.79 to $85.99.
We offer parts from 9 brands trusted to make quality Transmission Parts for your Mazda RX-2. Before you buy, take some time to read through customer reviews. We currently have 479 reviews of Mazda RX-2 Transmission Parts from previous customers. Some of the top rated parts include Maxi-Kool® XL Transmission Oil Cooler with 5.0 stars and Econo-Kool® Transmission Oil Cooler with 4.3 stars.
Find your RX-2 Transmission Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mazda RX-2 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Transmission Parts Brands for Your Mazda RX-2
Our inventory holds Transmission Parts for your Mazda RX-2 from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Permatex, and National, all of which can keep that Mazda happy.
We have Permatex parts available for your Mazda RX-2 in categories like Automatic Transmission Pan and Gaskets. Some of the top-rated Permatex parts in these categories are:
from
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
Transmission Pan Gaskets
Top-Rated Imperial Transmission Parts
Leading Imperial Transmission Parts
We carry Imperial brand parts for your Mazda RX-2 across several catalog categories, including Transmission Cooler and Parts. Some of our most reviewed Imperial parts include:
FAQs for Mazda RX-2 Transmission Parts
What are the most purchased Transmission Parts for the Mazda RX-2?
Out of 26 Transmission Parts for the Mazda RX-2, the most popular in our inventory are:
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
OE Transmission Coolers
from
$17.49
This product is not rated
The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
Transmission Oil Pan Gaskets
What are the top-rated Mazda RX-2 Transmission Parts?
Top-rated Transmission Parts for your Mazda RX-2 based on customer reviews/ratings are:
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
from
$52.99
(4)
Econo-Kool® Transmission Oil Cooler
“I just like the additional cooling on all my vehicles for transmission to last longer. They aren’t getting any cheaper to overhaul!”
from
$59.99
(3)
Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty
“Bought these before for my vehicles. Put this one on a Silhouette and by-passed the in-radiator cooler altogether. Haven’t put a thermometer on it t”
