Mazda B4000 Parts

Mazda B4000 Body Parts

from

$72.99

Fey Diamondstep Bumpers are non-OE design full replacement bumpers for older model vans and pickups. Fey Diamondstep Bumpers are known for their diverse functionality, reliability and custom look.

Product Features:

Mount kit sold separately
Popular diamond tread design
Full size tongue weight of 800 lbs and 8,000 lbs trailer weight
Downsize and compact are 350 lbs tongue weight and 3,500 lbs is trailer weight certified
V5 tested certified to SAE J684

from

$121.99

If you have ever scratched your truck bed then you know the feeling that follows when you hear the sound of your investment losing value. You toss a lot of things in the bed of your truck, why not let one of them be a little protection. Dee Zee Bed Mats are a cost-effective solution for keeping your truck bed surface free from scratches, dings, and dents caused by loading and unloading, or cargo shifting around during transport. Dee Zee Bed Mats custom fit your truck contours for ultimate coverage. Concerns about trapped water and rust are non-existent since our truck mats use rubber cleats on the underside to facilitate drainage and keep the Bed Mat securely in place. Made with superior manufacturing, each heavy-duty Dee Zee Bed Mat is constructed from .375 Inch high-density Fiber Infused Rubber compound that resists abrasion and tears from your cargo. The tightly compressed Rubber fibers can handle common gas or oil spills, making them perfect for transporting motorized work equipment or all-terrain vehicles. Your custom fit Bed Mat deflects harmful UV rays and will not crack, rust or break- even in the most extreme temperatures.

Product Features:

Prevent Cargo From Shifting And Damaging Your Truck Bed
Rubber Cleats Help Keep The Mat In Place
Highly Compressed Rubber Resists Abrasions And Tears
Will Not Rust, Crack, Or Break, Even In Extreme Temperatures
Resists Common Fuel And Oil Spills
Custom Fit Application
Custom Fit Applications Contour Around Wheel Wells For A Perfect Fit
Trimming May Be Required For Short Bed Applications
Made In USA

from

$8.99

New Standard Replacement Rear Tailgate Handle, Black, Without Keyhole

Product Features:

Black, Without Keyhole, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$504.99

The Genesis Roll Up is a low profile, soft tonneau cover utilizing heavy-duty velcro hook and loop fasteners, so you can get to your tools easily and cover your bed quickly. The cover’s weather and tear-resistant fabric features a set of adjustable straps ensuring a tight fit and protection against water damage. After rolling up, the bed cover is secured by nylon straps. LUND’s Genesis Roll Up tonneau covers are designed fit to your specific make, model and year, providing a custom style that looks great on your truck. Pre-assembled to install in minutes. The cover installs easily onto any vehicle in under a half hour. It features a pre-assembled, no-drill design and applies to your bed with heavy-duty adjustable clamps.

Product Features:

Heavy Duty Attractive And Durable
Resistant To Water/ Mildew And UV Rays
Conceals/ Secures And Protects Cargo
Styles Can Be Installed Or Removed In Minutes
Reduces Tailgate Drag
Pre Assembled For Easy Installation
Designed Specifically For Your Make/ Model And Year
Cleans Easily With Water
Limited Lifetime Warranty

from

$28.04

Door Open Warning Sw

from

$8.99

This window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have been lost or broken
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$57.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$15.49

This tailgate support cable matches the fit and function of the original cables on specific vehicles. Made of quality materials, this durable cable is engineered to stabilize the tailgate over the long haul.

Product Features:

Direct replacement – this tailgate support cable fits specific vehicles to preserve tailgate stability
Durable construction – this part is made of quality materials for a long service life
Saves money – offers quality at a competitive price while preventing tailgate damage
Quality assured – this tailgate support cable has undergone virtual testing for fit, function and durability over time

from

$69.70

Restore the ease and convenience of remotely locking or unlocking any one of your vehicle’s doors with Dorman’s Door Lock Actuator Motor. The actuator returns the power door lock to proper operation-and our robust plastic housing helps protect the actuator from damage, ensuring year after year of service.

Product Features:

Direct replacement for a proper fit every time
High quality electric motor
Durable construction
Vehicle try-on testing has been conducted on this part to ensure trouble-free performance

from

$23.99

Passenger Side Mirror for Ford ranger PickUp: Mazda PickUp. Black. Foldaway. Manual. Mirror glass adjusted manually. Convex Lens. Mirror glass does not have heating capabilities. Manual folding for additional clearance. Mirror has no turn signal. Housing finish is Textured Black.

Product Features:

Mirror glass is adjusted by moving Mirror head
Manual folding for additional clearance
Textured Black
Superior material and manufacturing process ensures the highest quality possible
Superior material and manufacturing process ensures the highest quality possible

from

$79.99

Rampage LED Tailgate Light Bar – Superbrite LED light bar from Rampage has been designed and manufactured to expand overall life expectancy with the introduction of a waterproof, fully sealed electrical system. This innovative Light Bar is brighter and lasts longer due to the development of a waterproof, fully sealed electrical system. The completely encapsulated circuit board with robotically assembled high intensity LED bulbs is encased in a rigid, injection molded cap while suspended in a UV stabilized clear urethane, creating a seamless, completely waterproof Tailgate Bar. The Rampage Truck, Mini Truck and SUV Tailgate light bar is designed to fill the recessed space between the tailgate and bumper, and is easily installed (without drilling) using durable 3M automotive grade adhesive foam tape, heavy gauge wiring with plug-in flat four hitch connector to quickly plug into existing trailer hitch. Includes fuse protection, long life superbrite LED bulbs for Brighter faster lighting response. Waterproof, high quality SMT technology circuit board, attaches to vehicle with 3M adhesive foam tape.

Product Features:

Six Function Superbright LED Bar
L/R Turn Signals
Flasher/Running Lights
Waterproof Completely Encased Electrical System
Heavy Gauge Wiring With OEM 4 Plug Connector
Robotically Assembled LED Circuit In 49-Inch Bar
Universal Fit And Mounting With OEM 3M Tape
Long Life Super Bright LED Bulbs

from

$1050.00

New CAPA Certified Standard Replacement Hood Panel, Made Of Aluminum

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$85.99

PENTOSIN ATF 44 5L

from

$25.49

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$28.49

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:

Protect Your Vehicle And Trailer From Rocks And Messy Conditions
Universal Fitting
Easy No Drill Installation
Perfect Compliment Nerf Bars

from

$95.99

Truck bed loose from rusted or missing hardware? This truck bed mounting hardware matches the fit of the original equipment mounting hardware to securely remount the truck bed to the frame.

Product Features:

Ideal replacement – this bed mounting hardware kit contains all the necessary components to completely remount the truck bed to the frame.
Durable construction – this truck bed hardware is finished with a corrosion-resistant coating for a long service life.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$36.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$31.53

Dorman’s sturdy Exterior Door Handles stand up to severe weather conditions and years of handling. Plus, they are designed for a proper fit every time, making installation easy. Paint yours, if desired, to match the original color.

Product Features:

Includes spring and clips (where applicable)
Smooth or textured surface available
Chrome-plating available (where applicable)
Available for front and rear driver and passenger sides

from

$17.79

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$26.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Black. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Black, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$13.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance.
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$49.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$748.99

Cab Forward Truck Covers are designed as a quick and easy cover solution to protect your truck’s cab and hood. Sunbrella provides protection and years of service in intense sun climates like Arizona and other areas of the Sunbelt, where UV rays can rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella has long been the recognized leader in longwearing marine fabrics for bimini tops, sail covers and deck enclosures. Besides marine uses, Sunbrella is also used for commercial awnings due to its ability to provide UV blockage, along with a rich, woven finish. The acrylic fibers are solution dyed, before the fabric is woven, to assure the color goes all the way through the fabric. Using a special finish process, the material is then softened for use as a truck cab cover fabric. The fabric is exceptionally strong and, coupled with its UV resistance, it also makes an excellent cover for RV’s and trailers that spend extended time stored outside.

Product Features:

Custom Protection for Front Half of Pickup
Great for Use with a Camper
Protects Interior From UV & Reduces Heat Build-up
Easy to Use
Cab Forward Covers Available in Multiple Fabrics

from

$13.99

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

Ideal replacement – this window crank handle matches the fit and function of the original equipment component.
Durable construction – this window crank handle is made of durable material to withstand extended use
Easy to install – this window crank requires no special tools to install
Versatile design – this window crank handle is suitable for use in various locations in the vehicle

from

$23.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Mazda B4000 Transmission Parts

from

$101.99

AT SHIFT KIT

from

$71.99

from

$21.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40°F to 400°F / -40°C to 204°C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$23.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$193.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Fluid Balanced

from

$62.99

This transmission range sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transmission range sensor is designed to match the fit and function of the original sensor on specified vehicles.
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$140.07

Motorcraft ABS wheel speed sensors are designed for use with electronic systems in Ford and Lincoln vehicles.

Product Features:

They work with various systems, including Anti-Lock Brake System (ABS)
Recommended by Ford Motor Company

from

$23.79

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 83-12; MAZDA 92-09; MERCURY 98-01;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1983-2012
Weight approx: 4 Lbs
WITH INTERLOCK

from

$158.99

AT OVERHAUL KIT

from

$9.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$28.49

TAPERED ROLLER BEARI

from

$6.99

AT CONTR SHAFT SEAL

from

$14.99

Product Features:

Brand may vary by location

from

$6.39

SKF’s clutch pilot bushings help guide and locate the driving plate in radial and axial directions and transfer loads from the clutch to the gearbox input shaft. They also enable a difference in rotational speed between crankshaft and gearbox input shafts during clutch actuation.

Product Features:

Extended service life
High running accuracy
Low noise and vibration level
Extremely compact, lightweight design
Very high temperature resistance

from

$10.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$261.99

AT MASTER REPAIR KIT

from

$45.99

AT SPEED SENSOR

from

$12.99

AT EXT HOUSING SEAL

from

$30.59

Pinion Seal

from

$1382.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$16.49

TAPERED ROLLER BEARI

from

$23.29

Manufactured with premium-grade steel, National® cylindrical bearings are designed and engineered to meet OE specifications.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$3.99

AT SOLENOID SEAL

from

$13.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$36.82

MT Output Shaft Seal

Mazda B4000 Clutch Systems

from

$77.99

Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$204.99

For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.

from

$259.99

from

$218.99

from

$6.99

Product Features:

Brand may vary by location

from

$15.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$61.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$98.15

The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$58.99

from

$86.65

The Sachs Clutch Master Cylinder is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$58.68

The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

Extended service life
Compact, lightweight design
Sealed for life with high performance, application-specific grease
Simplified assembly
Integrated functionality
Design flexibility

from

$305.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

from

$269.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$169.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$276.99

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$167.04

LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:

OE quality and direct fit application
Made from high quality steel
Designed to reduce clutch chatter and vibration
Dynamically balanced

from

$106.46

OE quality and direct fit application
Made from high quality steel
Designed to reduce clutch chatter and vibration
Dynamically balanced

from

$88.99

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$159.99

M/T FLYWHEEL

from

$135.99

M/T FLYWHEEL

from

$154.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

from

$95.99

from

$106.99

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$123.36

OE quality and direct fit application
Made from high quality steel
Designed to reduce clutch chatter and vibration
Dynamically balanced

from

$76.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

Mazda B4000 Automotive Accessories

from

$151.99

You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:

Classic Raised Brite Tread Pattern
Rigid Frame Resists Warping
Molded Locking Tabs
Poly Plastic Storage Chest Rigid Plastic Frame Resists Warping
Made In USA

from

$113.99

The Original Covercraft UVS100 Sunscreen has been a customer favorite for decades! These unique sun shades are made to fit your exact windshield specific to the Year, Make and Model of your vehicle. With a perfect fit to your windshield, you get maximum interior protection from harmful UV rays and damaging heat. Unlike other flimsy sun shades, heat shields, or UV shields our Custom UVS100 Sunscreens use a thick foam core with a triple laminate construction and a soft felt backing. This means that you get superior insulation that reflects and absorbs heat to dramatically reduce the interior vehicle temperatures. The unique design of our Custom Sunscreens allows them to be easily folded up when not in use perfect for compact storage. This makes it easy to fold up and stow behind your seat without fear of it getting stepped on. Our Original UVS100 is available in 5 colors to give your vehicle a unique look. Keep your interior looking like new, prevent fading and cracking, and reduce the heat build-up in your vehicle with the Best-Fitting Custom Sunscreen.

Product Features:

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$42.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$204.99

The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!

Product Features:

Floorless design allows for set up without removing gear from the bed
Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
Color coded poles and pole pockets for quick and easy set up
Water resistant fabric with tape sealed seams (PU 2000mm)
Sky view vent for more light, ventilation, and sleeping under the stars
All truck tents sleep (2) adults
Includes: tent, rainfly, stuff sack, and sewn-in set up guide

from

$212.99

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone’s needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

Designed To Be Installed On All Truck Beds
Quickly Removed For A Clean Look When Not In Use
Adjustable Width And Height For Customized Installation
High Quality And Durable Powder Coated Finish
250 Pounds Capacity
Easy Install And Can Be Mounted On Driver Or Passenger Side
Drilling Is Required

from

$43.99

Need a new key fob? This DIY keyless remote is designed to match the appearance and function of the original on specific vehicle years, makes, models and configurations. With easy-to-follow instructions, you can program it yourself in minutes, and rely on it for years.

Product Features:

Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations.
Do-it-yourself solution – follow the simple onboard programming procedure in the included instructions to set up your new fob in minutes
Durable construction – made from quality, drop-resistant components to ensure reliable performance and long service life
Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

from

$59.99

AVS Bugflector® helps prevent damage to the hood, windshield and fenders from road debris and bugs. Bugflector comes in a traditional hood width design that improves the look of your vehicle and protects your investment. Bugflectors install quickly and are molded with a higher profile with custom fit applications for trucks, vans, SUVs and CUVs. Whether you drive a truck, SUV, CUV or passenger car, you can choose from the style that suits your design preferences and vehicle style.

Product Features:

Provides deflection to protect hood, fenders, and windshield
High profile, narrow tapered design for Trucks, SUVs, and Vans
Off-the-hood design allows for easy cleaning and waxing
Durable, impact-resistant acrylic construction
Available in dark smoke finish
Easy, no-drill installation

from

$62.99

Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:

Maximum protection to your hood to complement the look of your vehicle
Precision engineered for a perfect fit to your vehicle
Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
Available in smoke, chrome, American flag and camo finishes
UV and scratch-resistant while being car-wash safe

from

$69.99

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

Precision engineered for a custom fit on your vehicle with modern, curved design
Easy installation with no-drilling or special hardware required
Attaches easily with 3M automotive-grade adhesive above the window
Made from durable, impact-resistant acrylic
Available in dark smoke and chrome finishes

from

$79.99

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel. They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision machined to perfectly fit your vehicle s window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

Offers Maximum Fresh Air Enjoyment
Optically Transparent OEM Quality
Sleek Aerodynamic Styling
Reduced Wind Noise
No Unsightly Exterior Tape
Minimizes Interior Heat When Parked Helps Keep Side Windows Dry In The Rain
Precision Machined To Perfectly Fit Your Vehicle
Installed Inside The Window Channel

from

$49.99

Precision engineered for a custom fit on your vehicle with modern, curved design
Easy installation with no-drilling or special hardware required
Attaches easily with 3M automotive-grade adhesive above the window
Made from durable, impact-resistant acrylic
Available in dark smoke and chrome finishes

from

$49.99

Precision engineered for a custom fit on your vehicle with modern, curved design
Easy installation with no-drilling or special hardware required
Attaches easily with 3M automotive-grade adhesive above the window
Made from durable, impact-resistant acrylic
Available in dark smoke and chrome finishes

from

$81.99

The Budge Ultra SUV Cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our Ultra SUV covers are fully breathable, with ultra-sonically welded seams for added durability. This soft, nonabrasive material will not harm the surface of your vehicle. Designed for indoor and outdoor use, the Ultra SUV Cover is designed to be breathable while it protects your vehicle. This improves airflow to reduce condensation and helps prevent mold and mildew. The Ultra cover features a full elastic hem and built-in grommets. This cover is gray in color and includes a storage bag and antenna patch. Designed to fit, this SUV cover fits SUVs 210″ L x 68″ W x 60″ H.

Product Features:

This SUV cover fits SUVs 210″ L x 68″ W x 60″ H.
This SUV cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
This SUV cover is water resistant and features ultrasonically welded seams for extra durability
Cover is suitable for short term outdoor protection and long-term indoor protection
Elasticized hem and sewn-in grommets for a secure fit

from

$79.99

Autocraft Easy Fit truck cover offers superior protection for your vehicles. The fabric which is soft, breathable and with water repellent coating does not only prevent your vehicles from scratching but also protect against mold and mildew. It designed with full elastic, double stitched hem, reinforced grommets and rope to ensure a better and secure fit. Bag included for convenient storage.

Product Features:

Fit trucks 16′-17.5′ (4.8m-5.3m)
Lightweight, breathable, non-abrasive fabric
Water repellent coating, protects against mold and mildew
Full elastic and double stitched hem to ensure a better fit
2 built-in reinforced grommets and 1 rope are included to keep your cover in place
Antenna hole patch included to provide additional protection from water or dust soak into the hole that you cut for antenna to pass through
Bag included for easy storage

from

$1427.99

Dee Zee Transfer Tanks A safe and convenient means for transporting non flammable liquids. Constructed of heavy Gauge aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 3/8 Inch drainage plug and venting coupler. Tanks are intended for private use (non commercial).

Product Features:

Made From Non-Rusting Brite-Tread Aluminum
Perfect For Transporting Liquids
Radius Curve Design Eliminates Key Welded Pressure Points
Many Handy Styles To Fit Most Needs

from

$1438.99

Dee Zee Transfer Tanks – A safe and convenient means for transporting non-flammable liquids. Constructed of heavy gauge Brite-Tread aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 0.375 Inch drainage plug, and venting coupler. Tanks are intended for private use (non-commercial).

Product Features:

Specialty Series Transfer Tank
non Rusting 0.125 Inch Brite Tread Aluminum
Radius Curve Eliminates Weld Pressure Points
Includes Cap And Coupler For Venting
3 Stability Baffles And Drain Plug
Mounting Tabs To Secure To The Truck Bed

from

$129.99

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$27.99

The name says it all – the Universal Car Remote works like a universal TV remote, but it’s made for cars. It’s designed to work with factory-installed keyless entry systems. It works exactly like a vehicle’s original factory remote, unlocking and locking doors, popping open the trunk – everything an original remote does. The Universal Car Remote has the capabilities of 216 remotes packed into a single device. It replaces factory original remotes for vehicles made by 21 car manufacturers – from Buick to Volkswagen. For the first time ever, you can replace remotes using a single device.

Product Features:

Introducing world’s first and only universal car remote.
The Universal Car Remote has the capabilities of 216 remotes packed into a single device
It replaces factory original remotes for vehicles made by 21 car manufacturers – from Buick to Volkswagen
Freshly installed battery included

from

$19.99

This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

Mazda B4000 Interior Products

from

$21.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$181.99

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface.

Product Features:

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
Semi┐custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family

from

$109.50

Dorman offers a variety of Multi Function Switches, including Turn Signal Switches, Cruise Control Switches, Tilt Lever Switches and more. A direct replacement, Multi Function Switches are an imperative replacement item for safety compliance.

Product Features:

Multi Function Switches operate various systems on the vehicle, including lights, turn signals, cruise control and wiper system
A necessary replacement item for passing state inspection
Plug-and-Play for easy installation
All Multi Function Switches have been quality tested for trouble-free performance

from

$34.49

from

$16.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$17.29

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$50.99

Product Features:

Optimally positions key performance data within driver’s field of vision
Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
Black textured finish which can be painted to match your interior if desired
High quality, composite construction is incredibly durable and looks great
Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

from

$41.99

Product Features:

Optimally positions key performance data within driver’s field of vision
Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
Black textured finish which can be painted to match your interior if desired
High quality, composite construction is incredibly durable and looks great
Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

from

$146.42

Motorcraft multifunction switch assemblies meet the demands of the sophisticated electrical systems of current Ford and Lincoln vehicles.

Product Features:

For ease of installation, requires no cutting or splicing to adapt existing wiring and/or harnesses
Designed to fit Ford and Lincoln vehicles
Critical to driver and passenger safety
Recommended by Ford Motor Company

from

$19.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$66.99

from

$57.99

from

$41.99

This odometer drive gear is designed to match the fit and function of the original gear on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this odometer drive gear is designed to match the fit and function of the original gear on specified vehicles, and is engineered for durability and reliable performance.
Restores functionality – reliable replacement for an original part that has failed due to gear stripping.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$113.99

This clutch pedal bracket is a direct replacement for a worn or broken original equipment bracket. Made of durable materials for reliable service, this bracket has been validated and tested for fit and function.

Product Features:

Upgraded replacement – this clutch pedal bracket includes an oil-impregnated bronze pivot bearing to prevent premature wear at the pivot point.
Improved durability – this upgraded clutch bracket is designed for greater durability than the original equipment part.
Easy to install – this upgraded clutch bracket installs directly in place of the factory bracket using the original clutch pedal
Quality tested – this part has undergone vehicle try-on and material testing to ensure a quality fit and durable service

from

$101.99

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

Soft foss fiber carpet won’t fray or unravel
Custom fit to the dashboard of your vehicle
Helps prevent dashboard warping and cracking
Reduces hazardous windshield glare
Passenger-side airbag opening included where applicable
Hook and loop fasteners included for easy secure installation

from

$112.99

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$112.99

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$106.99

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$112.99

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$90.99

from

$174.99

from

$87.12

Multi Function Switches operate various systems on the vehicle, including lights, turn signals, cruise control and wiper system
A necessary replacement item for passing state inspection
Plug-and-Play for easy installation
All Multi Function Switches have been quality tested for trouble-free performance

Looking for the best Mazda B4000 aftermarket replacement parts? Replacing worn and broken parts on your Mazda B4000? Check out our online catalog to find the best selection of aftermarket Mazda B4000 parts as well as real user reviews on Mazda B4000 replacement parts. Make an informed decision about every component you add to your B4000.

At Advance Auto, we’ve got you covered when it comes to getting your Mazda B4000 in tip top condition. We’ve got over 3,268 Mazda B4000 parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Mazda B4000 parts catalog to compare OEM and aftermarket parts for your Mazda B4000.

Whether you need Mazda B4000 body parts, interior components, or custom Mazda B4000 parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Mazda Interior Products same day? No problem, you can pick up B4000 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Mazda B4000 parts has never been easier.

Advance Auto customers frequently search for the following types of Mazda B4000 auto parts. Check out customer reviews and ratings, and compare prices on the following Mazda B4000 parts:

People also search Advance Auto for these popular years of the Mazda B4000:

Mazda B4000 Parts

Westin – Universal Bumper Mount Kit (Part No.97200)

Dee Zee – Direct-Fit, Without Raised Edges, 71.25"L X 51.5"W, Black, Rubber (Part No.DZ86718)

KAI – Tailgate Handle (Part No.MA1915106)

Lund – Genesis Elite Roll Up Tonneau (Part No.96813)

Motorcraft – Door Open Warning Sw (Part No.O3157677923MTR)

Dorman – Window Regulator hardware Kit – Scissor Type (Part No.702-013)

Carquest Premium – Door Window Switch (Part No.WSA1189)

Dorman – Help – Tailgate Cable – 16-5/16 In. (Part No.38532)

Dorman – Dorman Door Lock Actuator (Part No.O3003222136DOR)

K-Source – Mirror Assembly: Passenger Side, Manual Adjustment, Foldable, 1 Pk (Part No.61005F)

Rampage – Tailgate Light Bar, 49 in., Superbrite LED 6 Function with Brake, Reverse Lights (Part No.960137)

KAI – Hood Panel (Part No.FO1230173C)

Pentosin – PENTOSIN ATF 44 5L (Part No.1058212)

Dorman – Help – Interior Door Handle Front Right Textured Black (Part No.80659)

Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)

Dorman – Truck Bed Mounting Hardware (Part No.924-310)

Carquest Premium – Adjustable Pedal Switch Connector (Part No.PTA2064)

Dorman – Outside Door Handle (Part No.O3018827545DOR)

Carquest Premium – Brake Light Switch Connector (Part No.PTA1674)

KAI – New Standard Replacement Grille, Black (Part No.MA1200168)

Carquest – Door Jamb Switch (Part No.S1024)

Dorman – Window Regulator: Manual, 1 Pack (Part No.740-530)

Covercraft – Cab Forward Truck Cover (Part No.C16415D6)

Dorman – Help – Window Handle Front Rear Left Right (Part No.767MXCD)

Carquest Premium – Deck Lid / Liftgate Ajar Switch Connector (Part No.PTA1488)

ATP – AT SHIFT KIT (Part No.FK-7)

Carquest Premium – Neutral Safety Switch (Part No.SBC4431)

National – Multi-Purpose Seal (Part No.2658V)

Carquest Premium – Neutral Safety Switch Connector (Part No.PTA1439)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.FM136HD)

Dorman – Transmission Range Sensor (Part No.511-100)

Motorcraft – Motorcraft ABS Speed Sensor (Part No.N6030670347MTR)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2639)

ATP – AT OVERHAUL KIT (Part No.FGS-37)

National – Multi Purpose Seal (Part No.7929S)

FAG US – TAPERED ROLLER BEARI (Part No.KT37)

ATP – AT CONTR SHAFT SEAL (Part No.FO-15)

Driveworks – Auto Transmission Torque Converter Seal (Part No.S-2658-V)

SKF – Pilot Bushing (Part No.I1030181602SKF)

National – Bearings (Part No.LM501314)

ATP – AT MASTER REPAIR KIT (Part No.FM-42)

ATP – AT SPEED SENSOR (Part No.FE-9)

ATP – AT EXT HOUSING SEAL (Part No.FO-213)

Timken – Pinion Seal (Part No.J7010222495TIM)

Premium Drive Train – Manual Transmission Assembly (Part No.TM5R14098T4)

FAG US – TAPERED ROLLER BEARI (Part No.KT5)

National – Cylindrical Bearing (Part No.5707)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Driveworks – Oil Seal (Part No.S-2655)

SKF – MT Output Shaft Seal (Part No.J1157246224SKF)

LuK – Clutch Slave Cylinder (Part No.LSC003B)

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS028)

LuK – LuK OE Quality Replacement PREFILLED HYDRAULIC CLUTCH RELEASE ASSEMBLY (Part No.CRS017)

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS025)

Driveworks – Clutch Release Bearing (Part No.S-F-33126)

National – Bearings (Part No.F-33126)

LuK – Clutch Master Cylinder (Part No.LMC346)

LUK – Clutch Master Cylinder (Part No.I3000836049LUK)

LuK – Clutch Master Cylinder (Part No.LMC400)

Sachs – Clutch Master Cylinder (Part No.I3000329241SAC)

Sachs – Clutch Release Bearing (Part No.I2020442185SAC)

LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.07-139)

LuK – Clutch Kit: 9 15/16" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.07-905)

LuK – Clutch Kit: 9 15/16" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.07-096)

LuK – Clutch Kit: 10 1/8" Disc Diameter, 1" Input Shaft Diameter, 23 Tooth Spline (Part No.07-167)

LUK – Flywheel (Part No.I1000835831LUK)

LUK – Flywheel (Part No.I1000845330LUK)

ATP – Automatic Transmission Flex Plate (Part No.Z-192)

ATP – M/T FLYWHEEL (Part No.Z-362)

ATP – M/T FLYWHEEL (Part No.Z-289)

LuK – OE Quality Flywheel (Part No.LFW382)

LuK – OE Quality Flywheel (Part No.LFW155)

ATP – Automatic Transmission Flex Plate (Part No.Z-349)

LUK – Flywheel (Part No.I1000835739LUK)

LuK – OE Quality Flywheel (Part No.LFW156)

Dee Zee – Chest, Single Lid, Black, Plastic, 35" L X 14" W X 13" H, 3.6 Cubic Ft Capacity (Part No.DZ6535P)

Covercraft – UVS100 Custom Sunscreen – Silver (Part No.UV10595SV)

Kat’s – Freeze Plug Heater (Part No.11604)

Rightline Gear – Compact Size Bed Truck Tent (6′) (Part No.110770)