Find Oil Cooler Hoses in Mission, TX

If you’re in Mission and looking to repair or replace your oil cooler hoses, Advance Auto Parts has you covered. Oil cooler hoses are crucial for maintaining optimal engine temperatures and ensuring your vehicle runs smoothly. Over time, these hoses can develop leaks or cracks due to heat and pressure, leading to engine overheating or oil leaks. When purchasing oil cooler hoses, consider factors such as the hose material, compatibility with your engine type, and pressure ratings. Be aware that while you’re replacing the hoses, other related parts such as oil filters, gaskets, or even engine coolant may also need attention, depending on your vehicle’s condition.

Our Advance Auto Parts store located at 800 N Shary Rd, Mission, TX 78572, with the phone number (956) 519-8586, is easily accessible near major highways and bustling neighborhoods. This prime location ensures that you can quickly stop by to find the right parts for your vehicle without the hassle. In addition to our wide selection of oil cooler hoses, we offer a variety of in-store services to help you get back on the road faster. Whether you need battery installation, engine (OBD-II) code scanning, or even loaner tools for a DIY project, our knowledgeable staff is ready to assist you with everything you need.

Stop by today for quick service and expert advice on maintaining your vehicle. With our same-day curbside pickup and in-store pickup options, you can easily grab your needed parts and services without delay. Your vehicle deserves the best – and so do you!

Show More Show Less

Buy Engine Oil Cooler Hoses Online and pickup at your local Mission store

from

$54.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$54.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$61.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$37.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$36.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$43.49

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$55.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$45.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$54.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$64.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$134.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$122.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

Local Mission Auto Parts Stores for Oil Cooler Hoses

Advance Auto Parts #6608

800 N Shary Rd
Mission, TX 78572

(956) 519-8586

Get Directions Go to Store Page Check Availability at This Store

Buy Trans Oil Cooler Hoses Online and pickup at your local Mission store

from

$2.49

The hose circulates transmission fluid at high temperatures. The tube and cover are designed to meet OEM and SAE J1532 performance requirements. Features a polyester reinforcement for high burst protection. Will withstand fluid temperatures up to 257°F and is resistant to fuel, ozone, oil, grease and heat aging.

Product Features:

Similar to the SAE J1532 Specification
This item is sold in bulk quantities and only available for in store pick up

from

$2.49

Similar to the SAE J1532 Specification
This item is sold in bulk quantities and only available for in store pick up

from

$4.29

For use on the return side only. Built of a high-quality NBR tube to resist power steering fluid and features polyester reinforcement for high burst strength. NBR/PVC cover provides moderate oil resistance and good weather, ozone and abrasion resistance for long life.

Product Features:

Similar to the SAE J189 Specification

from

$7.99

Provides a safe, heat and oil resistant connecting line between oil cooler and transmission.

Product Features:

Easy-to-follow instructions and hose diameter indicator in each package
Nitrile tube, black CSM cover oil and abrasion resistant
Braided synthetic fiber-reinforced cord for increased strength
Meets or exceeds SAE 100R6
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Maximum temperature rating: +300 Deg. F (+150 Deg. C)
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$5.99

Provides a safe, heat and oil resistant connecting line between oil cooler and transmission.

Product Features:

Easy-to-follow instructions and hose diameter indicator in each package
Nitrile tube, oil and abrasion-resistant black CSM cover
Braided synthetic fiber-reinforced cord for increased strength
Meets or exceeds SAE 100R6
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Maximum temperature rating: +300 Deg. F (+150 Deg. C)
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$3.99

Designed to connect the transmission to an external cooler; or as a return line between the power steering mechanism and the hydraulic pump, Dayco’s transmission Oil Cooler/Power Steering Return Line Hose has a synthetic rubber tube and cover to resist oil, ozone, and aging due to heat. Reinforced with braided cord for increased strength, this hose has a working pressure of 250psi. It is designed to handle transmission oil temperatures up to +257 Degree F (+125 Degree C). Similar to SAE J189 type hose. Note: NOT suitable for power steering pressure lines.

Product Features:

Has a synthetic rubber tube and cover to resist oil, ozone, and aging due to heat
Reinforced with braided cord for increased strength, this hose has a working pressure of 250psi
Handles transmission oil temperatures up to +257 Degree F (+125 Degree C)
Made in the USA
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$2.99

Has a synthetic rubber tube and cover to resist oil, ozone, and aging due to heat
Reinforced with braided cord for increased strength, this hose has a working pressure of 250psi
Handles transmission oil temperatures up to +257 Degree F (+125 Degree C)
Made in the USA
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.

Find Oil Cooler Hoses in Mission, TX

Buy Engine Oil Cooler Hoses Online and pickup at your local Mission store

Dorman – Oil Cooler Coolant Pipe (Part No.902-098)

Dorman – Engine Oil Cooler Line (Part No.625-150)

Dorman – Engine Oil Cooler Line (Part No.625-179)

Dorman – Engine Oil Cooler Line (Part No.625-140)

Dorman – Engine Oil Cooler Line (Part No.625-139)

Dorman – Engine Oil Cooler Line (Part No.625-503)

Dorman – Engine Oil Cooler Line (Part No.625-163)

Dorman – Engine Oil Cooler Line (Part No.625-632)

Dorman – Engine Oil Cooler Line (Part No.625-621)

Dorman – Engine Oil Cooler Line (Part No.625-630)

Dorman – Engine Oil Cooler Line (Part No.625-022)

Dorman – Engine Oil Cooler Lines (Part No.625-209)

Local Mission Auto Parts Stores for Oil Cooler Hoses

Oil Cooler Hoses Categories

Buy Trans Oil Cooler Hoses Online and pickup at your local Mission store

Carquest Bulk Hose Tubing – Transmission Oil Cooler Hose (Part No.CQ31616)

Carquest Bulk Hose Tubing – Transmission Oil Cooler Hose (Part No.CQ32998)

AutoCraft – Power Steering Return Hose (Part No.AC3820P)

Gates – Transmission Oil Cooler Hose (Sold by foot) (Part No.27059)

Gates – Transmission Oil Cooler Hose (Sold by foot) (Part No.27058)

Dayco – Reinforced Transmission Oil Cooler/Power Steering Return Hose; 3/8 In. (sold by foot) (Part No.80391)

Dayco – Reinforced Transmission Oil Cooler/Power Steering Return Hose; 5/16 In. (sold by foot) (Part No.80383)

Find Oil Cooler Hoses Nearby to Mission

Find Other Belts and Hoses in Mission

Find Specific Oil Cooler Hoses in Mission

Oil Cooler Hoses for Popular Makes & Models in Mission