from

$39.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our starter solenoids have more pure copper windings than found on most vehicles to create a stronger magnetic field
Our polyester-insulated magnet wire, cadmium-plated copper discs and solid contact bolts reduce voltage drop and deliver full battery power to the starter while providing greater protection against electrical overload
Pure copper battery terminal studs reduce resistance to permit higher current flow, even in the hottest environments, for better performance
We understand and expect the demand for quality, our starting and charging system products feature high grade materials for extended service life
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$25.49

Product Features:

Designed to OE standards for ease of installation
Contain more pure copper windings than found on most vehicles and create a stronger magnetic field in even the hottest environments for better performance.
Solenoids contain cadmium-plated copper discs and solid contact bolts reduce voltage drop to deliver full battery power to the starter and have pure copper battery terminal studs that reduce resistance and permit higher current flow.

from

$24.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our starter solenoids have more pure copper windings than found on most vehicles to create a stronger magnetic field
Our polyester-insulated magnet wire, cadmium-plated copper discs and solid contact bolts reduce voltage drop and deliver full battery power to the starter while providing greater protection against electrical overload
Pure copper battery terminal studs reduce resistance to permit higher current flow, even in the hottest environments, for better performance
We understand and expect the demand for quality, our starting and charging system products feature high grade materials for extended service life
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$32.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
The BWD SELECT® solenoids contain more pure copper windings than found on most vehicles and create a stronger magnetic field in even the hottest environments for better performance.
The BWD SELECT® solenoids contain cadmium-plated copper discs and solid contact bolts reduce voltage drop to deliver full battery power to the starter and have pure copper battery terminal studs that reduce resistance and permit higher current flow.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$31.49

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$38.49

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$44.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$31.99

Solenoid. Universal Starter Solenoid. Side or Base Mount. 4 Pole. 12 Volt.

Product Features:

Universal Starter Solenoid
Side or Base Mount
4 Pole
12 Volt
Posts fit bot 5/16″ and 1/4″ connectors
UNSPSC: 31251510
UNSPSC:ÿ31251510

from

$27.49

Solenoid. Side or base mount. Posts:ÿ1/4″ or 5/16″. 1 post. Voltage:ÿ12.

Product Features:

Side or base mount
Posts: 1/4″ or 5/16″
Posts:ÿ1/4″ or 5/16″
1 post
Voltage: 12
Voltage:ÿ12
Premium quality for longer life
Meets or exceeds manufacturer specs

from

$22.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$27.49

Solenoid. 12V – 200 amp intermittent duty. Load current for battery ignition. Grounded thru battery switch. 4 pole.

Product Features:

12V – 200 amp intermittent duty
Load current for battery ignition
Grounded thru battery switch
4 pole
12 Volt DC
WIth spade terminal adapters

from

$62.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$62.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$39.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$43.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$52.99

This solenoid initiates high contact impact for positive starter action under the most severe conditions. Continuous 100% copper windings to develop maximum magnetic force. Corrosion resistant high-strength stainless steel plunger provides smoother starter engagement. Solid copper contact disc reduces voltage drop and battery drain. It even has an attractive chrome finish. Fits 1965-1990 stock Ford Starters.

Product Features:

Amerage Rating- 60-70 Amps continuous, 200 Amps Momentary (at 10 second intervals)

from

$21.79

Solenoid. 12 Volt. 5/16″ battery post. 4 pole – Grounded through pole not base. UNSPSC: 31251510.

Product Features:

12 Volt
5/16″ battery post
4 pole – Grounded through pole not base
UNSPSC: 31251510
UNSPSC:á31251510

from

$67.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$23.29

Solenoid. 3 pole. 12 Volt. With spade terminal adapters. 15% Duty Cycle – 20 sec. max.

Product Features:

3 pole
12 Volt
With spade terminal adapters
15% Duty Cycle – 20 sec. max
Fits: Kohler models CH11 – 14, CV11 – 15, M8, M10 – 14, M18 – 20
Fits:áKohler models CH11 – 14, CV11 – 15, M8, M10 – 14, M18 – 20
In display package

from

$21.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$17.99

Solenoid. 4 pole – Grounded through pole not base. 12 volt with 5/16″ battery post. Fits: Sabre, Scotts and John Deere LT models. UNSPSC: 31251510.

Product Features:

4 pole – Grounded through pole not base
12 volt with 5/16″ battery post
Fits: Sabre, Scotts and John Deere LT models
Fits:áSabre, Scotts and John Deere LT models
UNSPSC: 31251510
UNSPSC:á31251510

from

$16.99

New Goodmark 12V Starter Solenoid

Product Features:

Made Of Metal
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$35.99

Solenoid. Prime Line provides quality of all engine and drive parts and accessories. All Prime Line Power Sports products are manufactured to meet or exceed the original manufacturer’s specifications.. Premium quality for longer life. Meet or Exceeds OEM Specifications

Product Features:

Prime Line provides quality of all engine and drive parts & accessories
All Prime Line Power Sports products are manufactured to meet or exceed the original manufacturer’s specifications
Backed by Prime Line Powersports 1 year limited warranty
Premium quality for longer life
Meet or Exceeds OEM Specifications

from

$22.29

Solenoid. Side or base mount. Posts: 1/4″ or 5/16″. 1 post. Voltage: 12.

Product Features:

Side or base mount
Posts: 1/4″ or 5/16″
Posts:á1/4″ or 5/16″
1 post
Voltage: 12
Voltage:á12
Premium quality for longer life
Meets or exceeds manufacturer specs

Find Starter Solenoids in Midland, TX Near You

Compare Top Selling Starter Solenoids and check availability at your local Midland store

Carquest – Starter Solenoid (Part No.S5047)

Carquest – Starter Solenoid Switch (Part No.S5049)

Carquest – Starter Solenoid (Part No.S5049HD)

Carquest – Starter Solenoid (Part No.S100)

Driveworks – Starter Solenoid (Part No.84106)

Motorcraft – Original Equipment (O.E.) Relay Assembly – Starter Motor (Part No.SW-1951-C)

Carquest Premium – Starter Solenoid (Part No.SBC3196)

Prime Line – Universal Solenoid with Side or Base Mount, 1/4" or 5/16" Posts, 2-Post Design (Part No.7-01829D)

Prime Line – Universal Solenoid with Side or Base Mount & 1/4" or 5/16" (Part No.7-01828D)

Carquest – Multi-Purpose Relay (Part No.84C1001)

Prime Line – Solenoid (Part No.7-01860-1)

Carquest Premium – Starter Solenoid (Part No.SBC2147)

Carquest Premium – Starter Solenoid (Part No.SBC2107)

Carquest Premium – Starter Solenoid (Part No.SAC1146)

Carquest Premium – Starter Solenoid (Part No.SBC3223)

Accel – Ultra-Tork Starter Solenoid (Part No.40200)

Prime Line – Solenoid (Part No.7-01670)

Carquest Premium – Starter Solenoid (Part No.SBC2133)

Prime Line – Solenoid (Part No.7-01861-1)

Carquest – Multi-Purpose Relay (Part No.84C1004)

Prime Line – Solenoid (Part No.7-01819)

KAI – Starter Solenoid (Part No.GMK3020277641)

Prime Line – Solenoid (Part No.72-2055)

Prime Line – Solenoid (Part No.7-01828)

Local Midland Auto Parts Stores for Starter Solenoids

Get Starter Solenoids near 3200 Andrews Hwy

Get Starter Solenoids near 300 E Texas Ave

Get Starter Solenoids near 2209 Rankin Hwy

Find Starter Solenoids Nearby to Midland

Find Related Starters in Midland

Starter Solenoids for Top Makes & Models in Midland