Find Engine Cooling Hoses in Houston, TX

If you’re in Houston and in need of Engine Cooling Hoses for your car, truck, or van, look no further than Advance Auto Parts. Engine cooling hoses are critical components that help maintain your vehicle’s temperature by circulating coolant through the engine. Over time, these hoses can wear out due to heat exposure, coolant leaks, or even cracking, leading to potential overheating issues. When choosing replacement hoses, consider factors such as material quality, length, and bend angles, ensuring compatibility with your vehicle’s specific make and model. Additionally, it’s wise to check related components like clamps, thermostats, or water pumps, as they may also require attention during your cooling system maintenance.

Our Advance Auto Parts locations across Houston, such as the store at 5629 Bellaire Blvd, Houston, TX 77081, with the phone number (713) 588-1396, are well-equipped to provide you with the parts you need. Situated near major highways and vibrant neighborhoods, our stores are conveniently located to serve all your automotive needs. From the busy streets near Market Street to the bustling Alamana area, you’ll find that we’re easily accessible from various parts of the city.

In addition to our extensive inventory, we offer valuable in-store services including battery installation, engine code scanning, and coolant recycling, ensuring that you not only get the replacement parts you need but also the expert assistance to keep your vehicle running smoothly. Whether you’re picking up your parts in-store or utilizing our same-day curbside pickup, we’re here to make your experience as seamless as possible. Visit us and let our knowledgeable staff help you keep your engine cooling system in top condition!

Buy Upper Radiator Hoses Online and pickup at your local Houston store

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25" Long, 1.31" Diameter (Part No.E71989)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25" Long, 1.31" Diameter

from

$28.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.25" Diameter (Part No.D71763)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.25" Diameter

from

$21.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 30" Long, 1.38" Diameter (Part No.E72624)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 30" Long, 1.38" Diameter

from

$129.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.31" Diameter (Part No.E71878)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.31" Diameter

from

$61.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.44" Diameter (Part No.C72282)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.44" Diameter

from

$18.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.50" Diameter (Part No.E70935)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.50" Diameter

from

$44.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.25" Diameter (Part No.D72039)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.25" Diameter

from

$27.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.34" Diameter (Part No.C71794)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.34" Diameter

from

$17.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.28" Diameter (Part No.E72150)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.28" Diameter

from

$36.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.50" Diameter (Part No.E72468)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.50" Diameter

from

$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.19" Diameter (Part No.E72169)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.19" Diameter

from

$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21.50" Long, 1.25" Diameter (Part No.E71880)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21.50" Long, 1.25" Diameter

from

$48.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Local Houston Auto Parts Stores for Engine Cooling Hoses

Advance Auto Parts #3626
3002 Campbell Rd
Houston, TX 77080
(713) 462-0106
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #3628
1319 Cypress Creek Pkwy
Houston, TX 77090
(281) 301-7706
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #3629
5629 Bellaire Blvd
Houston, TX 77081
(713) 588-1396
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #3633
12611 Market Street Rd
Houston, TX 77015
(346) 320-0813
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6354
1120 W 11th St
Houston, TX 77008
(713) 862-4017
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6395
5802 Aldine Bender Road
Houston, TX 77032
(281) 441-2488
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6478
8650 Jones Rd
Houston, TX 77065
(281) 469-8593
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6533
1821 W Mount Houston Rd
Houston, TX 77038
(281) 847-4080
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6544
13402 State Highway 249
Houston, TX 77086
(281) 820-6946
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6788
5080 Highway 6 N
Houston, TX 77084
(281) 345-2915
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6836
3940 Fondren Rd
Houston, TX 77063
(713) 781-0773
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6837
11900 Bissonnet St
Houston, TX 77099
(281) 561-9091
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6839
8407 Highway 6 S
Houston, TX 77083
(281) 561-9042
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6841
8600 W Bellfort Ave
Houston, TX 77031
(713) 771-6983
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6843
6045 Scott St
Houston, TX 77021
(713) 842-1348
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6862
5511 Airline Dr
Houston, TX 77076
(713) 742-8107
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6929
12814 Hempstead Rd
Houston, TX 77092
(713) 462-1003
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6987
425 W Little York Rd
Houston, TX 77076
(713) 697-0577
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7262
11960 Westheimer Rd
Houston, TX 77077
(281) 925-2608
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7750
6220 Telephone Rd
Houston, TX 77087
(832) 460-0706
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7796
3003 S Richey St
Houston, TX 77017
(713) 244-6736
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7982
4555 Airline Dr
Houston, TX 77022
(713) 931-6015
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8012
4313 Steffani Ln
Houston, TX 77041
(713) 849-0489
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8062
13710 S Post Oak Rd
Houston, TX 77045
(713) 723-8111
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8073
4415 Telephone Rd
Houston, TX 77087
(713) 641-6015
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8094
9911 Almeda Genoa Rd
Houston, TX 77075
(713) 947-0022
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8112
7529 Harrisburg Blvd
Houston, TX 77012
(713) 924-9513
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8140
10777 Spring Cypress Rd
Houston, TX 77070
(281) 257-6489
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8408
15910 Wallisville Rd
Houston, TX 77049
(281) 452-4818
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8412
644 W Rankin Rd
Houston, TX 77067
(281) 875-8034
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8432
12296 Veterans Memorial Dr
Houston, TX 77067
(281) 587-2261
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8457
1906 Aldine Mail Route Rd
Houston, TX 77039
(281) 449-9100
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8498
17006 FM 529 Rd
Houston, TX 77095
(281) 550-7458
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8518
909 Telephone Rd
Houston, TX 77023
(713) 514-9951
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8549
439 Uvalde Rd
Houston, TX 77015
(713) 455-0090
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8551
11104 Airline Dr
Houston, TX 77037
(281) 847-3706
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8754
10086 Long Point Rd
Houston, TX 77055
(713) 647-7005
Get Directions Go to Store Page Check Availability at This Store

Buy Lower Radiator Hoses Online and pickup at your local Houston store

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.47" Diameter (Part No.D71957)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.47" Diameter

from

$34.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.50" Long, 1.31" Diameter (Part No.C70986)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.50" Long, 1.31" Diameter

from

$34.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1" Diameter (Part No.E71604)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1" Diameter

from

$35.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.72" Diameter (Part No.E71710)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.72" Diameter

from

$22.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.31" Diameter (Part No.C71134)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.31" Diameter

from

$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.94" Diameter (Part No.D72241)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.94" Diameter

from

$48.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 16.5 Inch Long, 1.75 Inch Inner Dia. (Part No.81331)

Flex Radiator Hoses; EPDM Rubber, 16.5 Inch Long, 1.75 Inch Inner Dia.

from

$22.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.5" Long, 1.75" Diameter (Part No.E72568)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.5" Long, 1.75" Diameter

from

$98.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.50" Diameter (Part No.E72245)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.50" Diameter

from

$47.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.31" Diameter (Part No.D71718)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.31" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter (Part No.B71013)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter

from

$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter (Part No.B71597)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter

from

$36.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Buy Radiator Coolant Hose O-Rings Online and pickup at your local Houston store

Dorman – Lower Radiator Hose O-Ring Kit (OE Fix) (Part No.926-160)

Lower Radiator Hose O-Ring Kit (OE Fix)

from

$19.99
When a lower radiator hose O-ring fails on certain Chevrolet and GMC vehicles, the dealer often requires replacing the entire hose assembly. This Dorman OE FIX allows direct replacement of just the failed O-ring to save time and money. Please note: this O-ring is engineered to fit only the updated OEM radiator hose on specified vehicles; it will not fit the lower radiator hose that was factory-installed on 2014-06 Chevrolet and GMC vehicles.

Product Features:
  • Direct replacement – this O-ring matches the fit and function of the original O-ring on the factory-updated version of the lower heater hose on 2014-06 GM vehicles
  • Cost-effective repair – inexpensive alternative to dealership forcing an entire hose replacement just to replace an O-ring
  • Application specific – engineered to fit only the updated OEM radiator hose on specified vehicles; it will not fit the lower radiator hose that was factory-installed on 2014-06 Chevrolet and GMC vehicles
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Radiator Coolant Hose O-Ring Kit (Part No.926-165)

Radiator Coolant Hose O-Ring Kit

from

$33.99
The O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles and are engineered to help securely seal hose connections when an existing O-ring has failed.

Product Features:
  • Direct replacement – the O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles
  • Ideal solution – engineered to provide a secure seal between radiator hose connections and help ensure proper cooling when an existing O-ring is leaking, cracked, or failed from heat and fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Radiator Coolant Hose O-Ring Kit (Part No.926-159)

Radiator Coolant Hose O-Ring Kit

from

$39.99
The O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles and are engineered to help securely seal hose connections when an existing O-ring has failed.

Product Features:
  • Direct replacement – the O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles
  • Ideal solution – engineered to provide a secure seal between radiator hose connections and help ensure proper cooling when an existing O-ring is leaking, cracked, or failed from heat and fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Lower Radiator Hose O-Ring (OE Fix) (Part No.926-162)

Lower Radiator Hose O-Ring (OE Fix)

from

$20.99
When a radiator hose O-ring fails, the dealer often requires replacing the entire hose assembly. This Dorman OE FIX allows direct replacement of only a failed O-ring to save time and money.

Product Features:
  • Simple fix – this set of O-rings is specifically manufactured to replace the original lower radiator hose O-ring on specific vehicles
  • Cost-effective repair – inexpensive alternative to dealership forcing an entire hose replacement just to replace an O-ring
  • Application specific – made to match the original O-ring on certain Chevrolet Cruze vehicles from 2011 to 2014
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dorman – Radiator Coolant Hose O-Ring Kit (Part No.926-536)

Radiator Coolant Hose O-Ring Kit

from

$26.99
The O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles and are engineered to help securely seal hose connections when an existing O-ring has failed.

Product Features:
  • Direct replacement – the O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles
  • Ideal solution – engineered to provide a secure seal between radiator hose connections and help ensure proper cooling when an existing O-ring is leaking, cracked, or failed from heat and fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More
Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.