Find Brake Lines and Fittings in Houston, TX

When it comes to maintaining the health of your vehicle, ensuring your brake lines and fittings are in top condition is crucial for both safety and performance. Brake lines can corrode, crack, or develop leaks over time, which may necessitate repair or replacement. Additionally, fittings that connect these lines can also wear out or fail, leading to decreased braking efficiency. While you’re at it, it’s wise to check related components such as brake pads, rotors, and fluid, to ensure a comprehensive brake system overhaul when necessary.

If you’re in Houston, several Advance Auto Parts locations are ready to assist you in finding the right parts for your vehicle. For instance, you can visit our store at 11104 Airline Dr, Houston, TX 77037, or give us a call at (281) 847-3706. This location is conveniently situated near the Aldine area and just off the North Sam Houston Parkway. You’ll find everything you need, from brake lines and fittings to tools and accessories to tackle more extensive projects.

At Advance Auto Parts, we also offer a range of in-store services to make your repair experience smooth and efficient. Whether you need battery installation, engine code scanning, or even loaner tools for more complicated tasks, we’re here to support you. Additionally, enjoy the convenience of same-day curbside pickup or home delivery, ensuring you get your necessary parts and services without a hassle. Visit one of our Houston locations today to keep your vehicle’s braking system performing at its best!

Show More Show Less

Buy Domestic Brake Lines Online and pickup at your local Houston store

American Grease Stick Co. – Domestic Nickel/Copper Brake Line, 3/16" x 40" (Part No.CN-340)

Domestic Nickel/Copper Brake Line, 3/16" x 40"

from

$15.99
AGS’s NiCopp is a nickel-copper alloy brake tubing that has many benefits over steel tubing. NiCopp is bendable by hand, flares easily, and will not rust. NiCopp has the strength and structural integrity of steel lines but with the added benefit of being corrosion resistant.Meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2 percent nickel, 1.4 Percent iron, 0.8 Percent manganese, and 88.6 Percent copper. NiCopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used.

Product Features:
  • Does not rust or corrode
  • DOT Approved for Hydraulic Brake Systems
  • Bends 58% easier than steel
  • Black-oxide fittings for 2X corrosion resistance
  • Black Oxide Fittings 2X Corrosion Resistance NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2871
See More

(25 reviews)
View Product

NiCopp – Copper Nickel Alloy Brake Line: 20" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.CN-320)

Copper Nickel Alloy Brake Line: 20" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$11.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. AGS NiCopp is a nickel-copper alloy brake tubing meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2873
  • NiCopp Does Not Rust or Corrode and is DOT Approved for Hydraulic Brake Systems
  • EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
See More

(17 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 72" Long, 1/4" Diameter, Universal Fit, 1 Piece (Part No.PA-472)

PVF Coated Steel Brake Line: 72" Long, 1/4" Diameter, Universal Fit, 1 Piece

from

$20.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
See More

(24 reviews)
View Product

NiCopp – NiCopp Nickel/Copper Brake Line Tubing Coil, 1/4 x 25ft (Part No.CNC-425)

NiCopp Nickel/Copper Brake Line Tubing Coil, 1/4 x 25ft

from

$79.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. Bends 58% Easier than Steel Tubing. AGS NiCopp is a nickel-copper alloy brake tubing that meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • Kit Contents: 25 ft. coil 1/4 in NiCopp tubing; Assortment of SAE and Metric assortment of tube nuts, adapters, and unions
  • This NiCopp kit is an economical solution for shops that want to build their own lines, custom lengths or non-standard applications
  • NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.
See More

(45 reviews)
View Product

American Grease Stick Co. – Domestic NiCopp Nickel/Copper Brake Line, 3/16" x 60" (Part No.CN-372)

Domestic NiCopp Nickel/Copper Brake Line, 3/16" x 60"

from

$21.99
AGS’s NiCopp is a nickel-copper alloy brake tubing that has many benefits over steel tubing. NiCopp is bendable by hand, flares easily, and will not rust. NiCopp has the strength and structural integrity of steel lines but with the added benefit of being corrosion resistant.Meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2 percent nickel, 1.4 Percent iron, 0.8 Percent manganese, and 88.6 Percent copper. NiCopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used.

Product Features:
  • NiCopp Does Not Rust or Corrode
  • DOT Approved for Hydraulic Brake Systems
  • Bendable by Hand- 58 percent easier than steel tubing.
  • Finished Lines are Available for Domestic and Import
  • Black Oxide Fittings 2X Corrosion Resistance NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2871
See More

(26 reviews)
View Product

NiCopp – Copper Nickel Alloy Brake Line: 12" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.CN-312)

Copper Nickel Alloy Brake Line: 12" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$9.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. AGS NiCopp is a nickel-copper alloy brake tubing meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2872
  • NiCopp Does Not Rust or Corrode and is DOT Approved for Hydraulic Brake Systems
  • EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
See More

(7 reviews)
View Product

NiCopp – Copper Nickel Alloy Brake Line: 60" Long, 3/8" Diameter, Universal Fit, 1 Piece (Part No.CN-660)

Copper Nickel Alloy Brake Line: 60" Long, 3/8" Diameter, Universal Fit, 1 Piece

from

$20.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. AGS NiCopp is a nickel-copper alloy brake tubing meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2893
  • NiCopp Does Not Rust or Corrode and is DOT Approved for Hydraulic Brake Systems
  • EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
See More

(15 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 60" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.PA-360)

PVF Coated Steel Brake Line: 60" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$17.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
See More

(7 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 51" Long, 1/4" Diameter, Universal Fit, 1 Piece (Part No.PA-451)

PVF Coated Steel Brake Line: 51" Long, 1/4" Diameter, Universal Fit, 1 Piece

from

$16.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
See More

(4 reviews)
View Product

American Grease Stick Co. – Domestic NiCopp Nickel/Copper Brake Line, 1/4" x 40" (Part No.CN-440)

Domestic NiCopp Nickel/Copper Brake Line, 1/4" x 40"

from

$16.99
AGS’s NiCopp is a nickel-copper alloy brake tubing that has many benefits over steel tubing. NiCopp is bendable by hand, flares easily, and will not rust. NiCopp has the strength and structural integrity of steel lines but with the added benefit of being corrosion resistant.Meets SAE Standard J1047 and ISO 4038; meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2 percent nickel, 1.4 Percent iron, 0.8 Percent manganese, and 88.6 Percent copper. NiCopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used.

Product Features:
  • NiCopp Does Not Rust or Corrode
  • DOT Approved for Hydraulic Brake Systems
  • Bendable by Hand- 58 percent easier than steel tubing.
  • Finished Lines are Available for Domestic and Import
  • Black Oxide Fittings 2X Corrosion Resistance NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2871
See More

(6 reviews)
View Product

NiCopp – Copper Nickel Alloy Brake Line: 30" Long, 1/4" Diameter, Universal Fit, 1 Piece (Part No.CN-430)

Copper Nickel Alloy Brake Line: 30" Long, 1/4" Diameter, Universal Fit, 1 Piece

from

$14.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. AGS NiCopp is a nickel-copper alloy brake tubing meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2878
  • NiCopp Does Not Rust or Corrode and is DOT Approved for Hydraulic Brake Systems
  • EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
See More

(8 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 51" Long, 5/16" Diameter, Universal Fit, 1 Piece (Part No.PA-551)

PVF Coated Steel Brake Line: 51" Long, 5/16" Diameter, Universal Fit, 1 Piece

from

$16.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
See More

(2 reviews)
View Product

Local Houston Auto Parts Stores for Brake Lines and Fittings

Advance Auto Parts #3626
3002 Campbell Rd
Houston, TX 77080
(713) 462-0106
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #3628
1319 Cypress Creek Pkwy
Houston, TX 77090
(281) 301-7706
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #3629
5629 Bellaire Blvd
Houston, TX 77081
(713) 588-1396
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #3633
12611 Market Street Rd
Houston, TX 77015
(346) 320-0813
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6354
1120 W 11th St
Houston, TX 77008
(713) 862-4017
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6395
5802 Aldine Bender Road
Houston, TX 77032
(281) 441-2488
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6478
8650 Jones Rd
Houston, TX 77065
(281) 469-8593
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6533
1821 W Mount Houston Rd
Houston, TX 77038
(281) 847-4080
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6544
13402 State Highway 249
Houston, TX 77086
(281) 820-6946
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6788
5080 Highway 6 N
Houston, TX 77084
(281) 345-2915
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6836
3940 Fondren Rd
Houston, TX 77063
(713) 781-0773
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6837
11900 Bissonnet St
Houston, TX 77099
(281) 561-9091
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6839
8407 Highway 6 S
Houston, TX 77083
(281) 561-9042
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6841
8600 W Bellfort Ave
Houston, TX 77031
(713) 771-6983
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6843
6045 Scott St
Houston, TX 77021
(713) 842-1348
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6862
5511 Airline Dr
Houston, TX 77076
(713) 742-8107
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6929
12814 Hempstead Rd
Houston, TX 77092
(713) 462-1003
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6987
425 W Little York Rd
Houston, TX 77076
(713) 697-0577
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7262
11960 Westheimer Rd
Houston, TX 77077
(281) 925-2608
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7750
6220 Telephone Rd
Houston, TX 77087
(832) 460-0706
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7796
3003 S Richey St
Houston, TX 77017
(713) 244-6736
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7982
4555 Airline Dr
Houston, TX 77022
(713) 931-6015
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8012
4313 Steffani Ln
Houston, TX 77041
(713) 849-0489
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8062
13710 S Post Oak Rd
Houston, TX 77045
(713) 723-8111
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8073
4415 Telephone Rd
Houston, TX 77087
(713) 641-6015
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8094
9911 Almeda Genoa Rd
Houston, TX 77075
(713) 947-0022
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8112
7529 Harrisburg Blvd
Houston, TX 77012
(713) 924-9513
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8140
10777 Spring Cypress Rd
Houston, TX 77070
(281) 257-6489
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8408
15910 Wallisville Rd
Houston, TX 77049
(281) 452-4818
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8412
644 W Rankin Rd
Houston, TX 77067
(281) 875-8034
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8432
12296 Veterans Memorial Dr
Houston, TX 77067
(281) 587-2261
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8457
1906 Aldine Mail Route Rd
Houston, TX 77039
(281) 449-9100
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8498
17006 FM 529 Rd
Houston, TX 77095
(281) 550-7458
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8518
909 Telephone Rd
Houston, TX 77023
(713) 514-9951
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8549
439 Uvalde Rd
Houston, TX 77015
(713) 455-0090
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8551
11104 Airline Dr
Houston, TX 77037
(281) 847-3706
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8754
10086 Long Point Rd
Houston, TX 77055
(713) 647-7005
Get Directions Go to Store Page Check Availability at This Store

Buy Brake Lines Online and pickup at your local Houston store

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-101)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$157.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(4 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-121)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$137.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(1 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-152)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$131.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(1 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-145)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$128.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(4 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-238)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$184.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(1 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-103)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$146.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(1 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-132)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$132.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(1 reviews)
View Product

SUR & R Auto Parts – 3/16" UltraBEND Brake Line (25′) (Part No.BR-EZ100)

3/16" UltraBEND Brake Line (25')

from

$60.99
S.U.R.& R.’s ULTRABEND Alloy tubing is the line of the pros. While most brake tubing is difficult to route and bend, our line can be bent without the aid of tools and routes faster than any other tubing available on the market.

Product Features:
  • American Quality – Proudly Made In America
  • Bend easily by hand, NO bending tools required
  • Consistently produces a smoother flare for a better seal
  • Flexibility allows for faster routing
  • Drastically cuts labor time
See More

(1 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-149)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$143.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(4 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-144)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$131.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(3 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-148)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$116.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(2 reviews)
View Product

Dorman – Stainless Steel Preformed Brake Line Kit (OE Fix) (Part No.919-220)

Stainless Steel Preformed Brake Line Kit (OE Fix)

from

$196.99
Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It’s also pre-formed to fit specific vehicle applications for easier installation.

Product Features:
  • Upgraded material – this replacement brake line kit is made of stainless steel for greater corrosion resistance
  • Pre-formed fit – these lines are sectional and already shaped to fit specific applications for easier installation
  • Complete kit – includes all tubes and fittings for complete brake line repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(1 reviews)
View Product

Buy Import Brake Lines Online and pickup at your local Houston store

Poly-Armour – PVF Coated Steel Brake Line: 8" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.PAJ-308)

PVF Coated Steel Brake Line: 8" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$7.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
  • Designed for Japanese Applications with SAE Inverted Flare Metric
See More

(4 reviews)
View Product

NiCopp – Copper Nickel Alloy Brake Line: 60" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.CNJ-360)

Copper Nickel Alloy Brake Line: 60" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$20.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. AGS NiCopp is a nickel-copper alloy brake tubing meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2923
  • NiCopp Does Not Rust or Corrode and is DOT Approved for Hydraulic Brake Systems
  • EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
  • Designed for Japanese Applications with SAE Inverted Flare Metric
See More

(3 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 20" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.PAJ-320)

PVF Coated Steel Brake Line: 20" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$10.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
  • Designed for Japanese Applications with SAE Inverted Flare Metric
See More

(1 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 30" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.PAE-330)

PVF Coated Steel Brake Line: 30" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$12.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
  • Designed for European Applications with ISO Bubble Flare Metric
See More

(2 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 40" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.PAE-340)

PVF Coated Steel Brake Line: 40" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$14.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
  • Designed for European Applications with ISO Bubble Flare Metric
See More

(2 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 60" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.PAJ-360)

PVF Coated Steel Brake Line: 60" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$18.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
  • Designed for Japanese Applications with SAE Inverted Flare Metric
See More

(2 reviews)
View Product

NiCopp – Copper Nickel Alloy Brake Line: 30" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.CNE-330)

Copper Nickel Alloy Brake Line: 30" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$14.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. AGS NiCopp is a nickel-copper alloy brake tubing meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2913
  • NiCopp Does Not Rust or Corrode and is DOT Approved for Hydraulic Brake Systems
  • EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
  • Designed for European Applications with ISO Bubble Flare Metric
See More

(3 reviews)
View Product

NiCopp – Copper Nickel Alloy Brake Line: 20" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.CNE-320)

Copper Nickel Alloy Brake Line: 20" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$12.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. AGS NiCopp is a nickel-copper alloy brake tubing meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2912
  • NiCopp Does Not Rust or Corrode and is DOT Approved for Hydraulic Brake Systems
  • EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
  • Designed for European Applications with ISO Bubble Flare Metric
See More

(3 reviews)
View Product

NiCopp – Copper Nickel Alloy Brake Line: 12" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.CNE-312)

Copper Nickel Alloy Brake Line: 12" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$10.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. AGS NiCopp is a nickel-copper alloy brake tubing meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2911
  • NiCopp Does Not Rust or Corrode and is DOT Approved for Hydraulic Brake Systems
  • EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
  • Designed for European Applications with ISO Bubble Flare Metric
See More

(2 reviews)
View Product

NiCopp – Copper Nickel Alloy Brake Line: 8" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.CNE-308)

Copper Nickel Alloy Brake Line: 8" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$9.99
NiCopp is considered the super-premium alternative for brake lines and should be considered where harsh environments are a factor, where the longest life-span for lines is required, and/or where direct OEM replacement is desired. NiCopp Does Not Rust or Corrode. DOT Approved for Hydraulic Brake Systems. AGS NiCopp is a nickel-copper alloy brake tubing meeting all international and U.S. requirements for brake tubing. This alloy is approximately 9.2% nickel, 1.4% iron, 0.8% manganese, and 88.6% copper. Under the UNS system, this alloy is designated as UNS C70600. NiCopp is not only much more corrosion resistant than steel, but easier to bend and form and has the strength and structural integrity of steel lines.

Product Features:
  • NiCopp lines and tubing meet the following specifications: SAEJ1047, ISO 4038, SAEJ1650, DIN 74234, BS2910
  • NiCopp Does Not Rust or Corrode and is DOT Approved for Hydraulic Brake Systems
  • EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
  • Designed for European Applications with ISO Bubble Flare Metric
See More

(2 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 40" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.PAJ-340)

PVF Coated Steel Brake Line: 40" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$14.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
  • Designed for Japanese Applications with SAE Inverted Flare Metric
See More

(4 reviews)
View Product

Poly-Armour – PVF Coated Steel Brake Line: 51" Long, 3/16" Diameter, Universal Fit, 1 Piece (Part No.PAJ-351)

PVF Coated Steel Brake Line: 51" Long, 3/16" Diameter, Universal Fit, 1 Piece

from

$16.99
Poly-Armour has become the new standard in brake line replacement over the last several years. Surpassing all competitors as THE choice for both professionals and do-it-yourselfers when it comes to brake, fuel, and transmission line repair, Poly-Armour is different from anything else on the market due to its PVF or Poly-Vinyl Fluorine coat. This coating is actually a highly durable ‘plastic’ coating that is ‘baked and cured’ to the line. This provides extra protection from corrosion, debris, and road surfacing solutions. It also offers superior bend-ability without kinking. Poly-Armour should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel, etc.

Product Features:
  • Poly-Armour is 30 Times More Resistant to Corrosion
  • DOT Approved for Hydraulic Brake Systems, meeting the following specifications: SAEJ527b, GM123M, SAEJ1290, DIN 74234
  • Bends Easier than Standard Steel Tubing
  • Designed for Japanese Applications with SAE Inverted Flare Metric
See More

(1 reviews)
View Product
Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.

Find Brake Lines and Fittings Nearby to Houston