Find Brake Wheel Cylinders in Akron, OH Near You

When it comes to maintaining your vehicle, ensuring the reliability of your brake system is crucial, and that often means paying close attention to components like Brake Wheel Cylinders. These parts are essential for your vehicle’s braking performance, as they help distribute hydraulic brake fluid and facilitate the proper functioning of your brakes. Common issues that might require repair or replacement in this category include leaking seals, corrosion, or general wear and tear, all of which can dramatically affect your vehicle’s safety and performance. It’s important to consider factors such as the compatibility of the Brake Wheel Cylinders with your specific make and model, as well as the quality and warranty that come with the parts, ensuring they meet industry standards.

At Advance Auto Parts, we have two convenient locations in Akron to assist you with your Brake Wheel Cylinder needs. Whether you’re near 1892 W Market St, Akron, OH 44313, where you can reach us at (330) 835-4491, or at 945 Canton Rd, Akron, OH 44312, available at (330) 798-4260, our knowledgeable staff is ready to help you find the right parts for your vehicle. Aside from Brake Wheel Cylinders, keep in mind that related components such as brake pads, brake shoes, and master cylinders may also need attention, especially if you notice any changes in your braking efficiency.

In addition to product selection, our Akron stores offer a variety of in-store services to simplify your vehicle maintenance experience. From battery installation to engine code scanning and same-day curbside pickup, we’ve got you covered. Our expert team can assist with loaner tools and recycling services for motor oil and batteries, ensuring your vehicle is operating at its best while making the process as convenient as possible for you. So, swing by Advance Auto Parts in Akron and get everything you need to keep your brakes in top-notch condition!

Compare Top Selling Brake Wheel Cylinders and check availability at your local Akron store

Carquest Wearever – Wheel Cylinder (Part No.WCA17508)

Wheel Cylinder

from

$17.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA610146)

WHEEL CYLINDER

from

$40.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA101604)

WHEEL CYLINDER

from

$21.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
  • Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
  • Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
  • Recommended replacement is suggested when servicing drum brake
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
  • Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
  • Assembly is done in clean room insuring no contamination is introduced into final assembly.
  • All assemblies dated coded for 100% accurate trace-ability.
  • Every wheel cylinder is pressure tested before being shipped insuring dependable operation and leak-free performance
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA610138)

WHEEL CYLINDER

from

$30.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37854)

WHEEL CYLINDER

from

$23.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – Wheel Cylinder (Part No.WCA610110)

Wheel Cylinder

from

$23.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA610135)

Drum Brake Wheel Cylinder

from

$40.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA51088)

Drum Brake Wheel Cylinder

from

$19.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA37983)

Drum Brake Wheel Cylinder

from

$27.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA610114)

Drum Brake Wheel Cylinder

from

$34.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – Wheel Cylinder (Part No.WCA37784)

Wheel Cylinder

from

$30.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA57146)

WHEEL CYLINDER

from

$14.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37855)

WHEEL CYLINDER

from

$27.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – Wheel Cylinder (Part No.WCA370055)

Wheel Cylinder

from

$28.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA610023)

Drum Brake Wheel Cylinder

from

$28.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – Brake Wheel Cylinder (Part No.WCA57147)

Brake Wheel Cylinder

from

$17.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA93356)

Drum Brake Wheel Cylinder

from

$19.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Wheel cylinders match what was originally installed on the vehicle.
  • Each cylinder matches OE for form, fit and function and material
  • Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
  • All bleeder screws are coated providing extra protection
  • Rubber components are manufactured in house using the latest formula EPDM material.
  • Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All casting machining is done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA610172)

Drum Brake Wheel Cylinder

from

$29.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA610108)

Drum Brake Wheel Cylinder

from

$47.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Carquest Wearever – Wheel Cylinder (Part No.WCA37872)

Wheel Cylinder

from

$39.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA35326)

Drum Brake Wheel Cylinder

from

$23.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA610010)

WHEEL CYLINDER

from

$30.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA90549)

Drum Brake Wheel Cylinder

from

$26.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
  • Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Carquest Wearever – Wheel Cylinder (Part No.WCA37647)

Wheel Cylinder

from

$22.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Local Akron Auto Parts Stores for Brake Wheel Cylinders

Advance Auto Parts #1879
945 Canton Rd
Akron, OH 44312
(330) 798-4260
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8885
1892 W Market St
Akron, OH 44313
(330) 835-4491
Get Directions Go to Store Page Check Availability at This Store

Get Brake Wheel Cylinders near 945 Canton Rd

Get Directions View Store Page

Stop by the Advance Auto Parts store #1879 located at 945 Canton Rd, Akron, OH for Brake Wheel Cylinders for your car, truck, or van. Conveniently situated to serve drivers in 44312 as well as nearby ZIP codes like 44221, 44222, and 44223, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (330) 798-4260.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Brake Wheel Cylinder or taking advantage of the free services available, this Akron store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
945 Canton Rd
Akron, OH 44312
(330) 798-4260 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Brake Wheel Cylinders near 1892 W Market St

Get Directions View Store Page

Stop by the Advance Auto Parts store #8885 located at 1892 W Market St, Akron, OH for Brake Wheel Cylinders for your car, truck, or van. Conveniently situated to serve drivers in 44313 as well as nearby ZIP codes like 44221, 44222, and 44223, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (330) 835-4491.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Brake Wheel Cylinder or taking advantage of the free services available, this Akron store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
1892 W Market St
Akron, OH 44313
(330) 835-4491 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes
Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.