Find Heater Hoses in Buffalo, NY Near You

When it comes to keeping your vehicle’s heating system in optimal condition, heater hoses are critical components that may require repair or replacement. These flexible tubes transport coolant from the engine to the heater core, enabling your car, truck, or van to maintain a comfortable temperature during colder months. Over time, heater hoses can become worn or damaged, leading to leaks or blockages that can cause overheating. When shopping for heater hoses, consider factors like material quality, hose length, and compatibility with your vehicle’s make and model. Additionally, keep in mind that other related components, such as clamps, thermostat, and coolant can also wear out and may need replacement during this process.

If you’re in the Buffalo area and need reliable heater hoses, visit Advance Auto Parts, located at 2431 Main St Buffalo, NY 14214, where you can reach us at (716) 235-5905. This convenient location is near neighborhoods including University Heights and is easily accessible via the Kensington Expressway. Our expert staff is ready to assist you with your purchase and answer any questions you may have about our extensive inventory of auto parts. We also offer additional in-store services, such as engine (OBD-II) code scanning and battery installation, ensuring your vehicle is running smoothly.

For even more options, you can stop by our other Buffalo locations, like the store at 2209 Niagara St Buffalo, NY 14207, reachable at (716) 874-2284, or 942 McKinley Pkwy Buffalo, NY 14220, which you can contact at (716) 825-8640. Whether you need same-day curbside pickup or expert advice on the best parts for your vehicle, Advance Auto Parts is your one-stop shop for all your automotive needs. Don’t let heating issues take the comfort out of your drive — visit us today!

Compare Top Selling Heater Hoses and check availability at your local Buffalo store

Carquest Bulk Hose Tubing – Standard Heater Hose 5/8" I.D. (Sold Per Foot) (Part No.CQ1726)

Standard Heater Hose 5/8" I.D. (Sold Per Foot)

from

$1.99
Product Features:
  • Sold per foot
  • Replacement coolant hose for most cars and light trucks.
  • This standard-duty hose is similar to the SAE20R3 specification for normal-duty service.
  • The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.
See More

Carquest Bulk Hose Tubing – Bulk Standard Heater Hose 1" I.D. (12 inches) (Part No.CQ1828-25)

Bulk Standard Heater Hose 1" I.D. (12 inches)

from

$2.49
This bulk item is sold Per Foot. Replacement coolant hose for most cars and light trucks. This standard-duty hose is similar to the SAE20R3 specification for normal-duty service. The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.
See More

Carquest Bulk Hose Tubing – Bulk Standard Heater Hose 1/2" I.D. (Sold by the foot) (Part No.CQ1725)

Bulk Standard Heater Hose 1/2" I.D. (Sold by the foot)

from

$1.99
Replacement coolant hose for most cars and light trucks. This standard-duty hose is similar to the SAE20R3 specification for normal-duty service. The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.

Product Features:
  • This bulk item is sold Per Foot
  • 1/2″ ID
  • Standard duty replacement heater hose for most cars and light trucks
  • Temperature Specification: -40 – 212 Deg. F
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71877)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter

from

$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length (Part No.87793)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length

from

$51.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length (Part No.87771)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length (Part No.87792)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length (Part No.80406)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length

from

$18.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 26 1/2 Inch Length (Part No.88429)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 26 1/2 Inch Length

from

$56.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 1/2 Inch Length (Part No.88389)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 1/2 Inch Length

from

$36.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length (Part No.87739)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length

from

$36.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length (Part No.80407)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length

from

$17.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dorman – Engine Heater Hose Assembly (OE Fix) (Part No.626-314HP)

Engine Heater Hose Assembly (OE Fix)

from

$138.99
Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic Y-connector. This Dorman OE FIX replacement features an upgraded aluminum Y-connector to prevent similar failures in the future.

Product Features:
  • Upgraded material – this replacement engine heater hose assembly features aluminum Y-connectors for added durability
  • Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
  • Complete replacement – hoses come with necessary clamps for easy installation
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dorman – Molded Heater Hose: Rubber/Plastic (Part No.626-522)

Molded Heater Hose: Rubber/Plastic

from

$90.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length (Part No.87684)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length

from

$44.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length (Part No.87785)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length

from

$29.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 3/4 Inch Length (Part No.87617)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 3/4 Inch Length

from

$29.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 7 Inch Length (Part No.88395)

Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 7 Inch Length

from

$14.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length (Part No.86122)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length

from

$20.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 Inch Length (Part No.87835)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 Inch Length

from

$15.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 22 Inch Length (Part No.88459)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 22 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, .75" Diameter (Part No.E72728)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, .75" Diameter

from

$83.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 12 Inch Length (Part No.87763)

Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 12 Inch Length

from

$40.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80403)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length

from

$13.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Local Buffalo Auto Parts Stores for Heater Hoses

Advance Auto Parts #5175
942 McKinley Pkwy
Buffalo, NY 14220
(716) 825-8640
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6374
2209 Niagara St
Buffalo, NY 14207
(716) 874-2284
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7895
2431 Main St
Buffalo, NY 14214
(716) 235-5905
Get Directions Go to Store Page Check Availability at This Store

Get Heater Hoses near 942 McKinley Pkwy

Get Directions View Store Page

Stop by the Advance Auto Parts store #5175 located at 942 McKinley Pkwy, Buffalo, NY for Heater Hoses for your car, truck, or van. Conveniently situated to serve drivers in 14220 as well as nearby ZIP codes like 14150, 14151, and 14043, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (716) 825-8640.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Heater Hose or taking advantage of the free services available, this Buffalo store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
942 McKinley Pkwy
Buffalo, NY 14220
(716) 825-8640 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Heater Hoses near 2209 Niagara St

Get Directions View Store Page

Stop by the Advance Auto Parts store #6374 located at 2209 Niagara St, Buffalo, NY for Heater Hoses for your car, truck, or van. Conveniently situated to serve drivers in 14207 as well as nearby ZIP codes like 14150, 14151, and 14043, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (716) 874-2284.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Heater Hose or taking advantage of the free services available, this Buffalo store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
2209 Niagara St
Buffalo, NY 14207
(716) 874-2284 Store Location Map
Store Hours
Monday 8:00 am-9:00 pm
Tuesday 8:00 am-9:00 pm
Wednesday 8:00 am-9:00 pm
Thursday 8:00 am-9:00 pm
Friday 8:00 am-9:00 pm
Saturday 8:00 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Heater Hoses near 2431 Main St

Get Directions View Store Page

Stop by the Advance Auto Parts store #7895 located at 2431 Main St, Buffalo, NY for Heater Hoses for your car, truck, or van. Conveniently situated to serve drivers in 14214 as well as nearby ZIP codes like 14150, 14151, and 14043, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (716) 235-5905.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Heater Hose or taking advantage of the free services available, this Buffalo store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
2431 Main St
Buffalo, NY 14214
(716) 235-5905 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes
Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.