Find Heater Hoses in Hickory, NC

When it comes to maintaining your vehicle’s heating and cooling system, heater hoses are critical components that may need repair or replacement over time. These hoses transport coolant to and from the engine and the heater core, helping to keep your car, truck, or van warm during colder months. Common signs that your heater hoses might need attention include visible leaks, swelling or cracking, and poor cabin heat. It’s also important to consider replacing associated parts such as clamps, the thermostat, or the water pump when servicing your heater hoses to ensure optimal performance and prevent future issues.

If you’re in the Hickory area and searching for quality heater hoses, Advance Auto Parts offers a variety of options at multiple convenient locations. You can visit the store at 3298 S Nc 127 Hwy Hickory, NC 28602, where the knowledgeable staff can assist you at (828) 330-4528. This location is easily accessible near the intersection of NC 127 and is close to neighborhoods like Viewmont. Each store also provides valuable in-store services such as engine (OBD-II) code scanning and same day curbside pickup, ensuring that you have everything you need for a hassle-free repair experience.

For additional convenience, check out other nearby locations including 1050 Lenoir Rhyne Blvd SE Hickory, NC 28602, and 1855 12th Ave NE Hickory, NC 28601, which serve customers in different parts of Hickory. Whether you’re on your way to work or running errands, there’s an Advance Auto Parts store nearby ready to help you find the right heater hoses and provide reliable service to keep your vehicle running smoothly.

Buy Heater Hoses Online and pickup at your local Hickory store

Carquest Bulk Hose Tubing – Standard Heater Hose 5/8" I.D. (Sold Per Foot) (Part No.CQ1726)

Standard Heater Hose 5/8" I.D. (Sold Per Foot)

from

$1.99
Product Features:
  • Sold per foot
  • Replacement coolant hose for most cars and light trucks.
  • This standard-duty hose is similar to the SAE20R3 specification for normal-duty service.
  • The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.
See More

Carquest Bulk Hose Tubing – Bulk Standard Heater Hose 1" I.D. (12 inches) (Part No.CQ1828-25)

Bulk Standard Heater Hose 1" I.D. (12 inches)

from

$2.49
This bulk item is sold Per Foot. Replacement coolant hose for most cars and light trucks. This standard-duty hose is similar to the SAE20R3 specification for normal-duty service. The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.
See More

Carquest Bulk Hose Tubing – Bulk Standard Heater Hose 1/2" I.D. (Sold by the foot) (Part No.CQ1725)

Bulk Standard Heater Hose 1/2" I.D. (Sold by the foot)

from

$1.99
Replacement coolant hose for most cars and light trucks. This standard-duty hose is similar to the SAE20R3 specification for normal-duty service. The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.

Product Features:
  • This bulk item is sold Per Foot
  • 1/2″ ID
  • Standard duty replacement heater hose for most cars and light trucks
  • Temperature Specification: -40 – 212 Deg. F
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71877)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter

from

$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length (Part No.87793)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length

from

$51.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length (Part No.87771)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length (Part No.87792)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length (Part No.80406)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length

from

$18.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 26 1/2 Inch Length (Part No.88429)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 26 1/2 Inch Length

from

$56.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 1/2 Inch Length (Part No.88389)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 1/2 Inch Length

from

$36.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length (Part No.87739)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length

from

$36.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length (Part No.80407)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length

from

$17.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Local Hickory Auto Parts Stores for Heater Hoses

Advance Auto Parts #4670
1855 12th Ave NE
Hickory, NC 28601
(828) 327-8502
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #4680
1425 US Highway 70 SW
Hickory, NC 28602
(828) 322-5810
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7311
3298 S Nc 127 Hwy
Hickory, NC 28602
(828) 330-4528
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #8025
1050 Lenoir Rhyne Blvd SE
Hickory, NC 28602
(828) 325-4906
Get Directions Go to Store Page Check Availability at This Store

Buy Heater Hose Fittings Online and pickup at your local Hickory store

Dorman – Heater Hose Connector (Part No.800-401)

Heater Hose Connector

from

$14.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Heater Hose Tee – 5/8 In. X 5/8 In. X 3/4 In. (Part No.800-422)

Heater Hose Tee - 5/8 In. X 5/8 In. X 3/4 In.

from

$16.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Help – Heater Hose Fitting for Belt tensioner (Part No.47027)

Heater Hose Fitting for Belt tensioner

from

$23.99
This replacement HVAC heater hose fitting is engineered to match the fit and durability of the stock hose fitting on specified vehicles. It is designed to withstand extreme temperatures to ensure leak-free service.

Product Features:
  • Ideal replacement – this HVAC heater hose fitting directly replaces the original fitting on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperatures and deliver leak-free performance
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409)

Coolant Connector - Inlet/Outlet 3/4In. Tube x 5/8In. Hose

from

$13.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Help – Heater Hose Fittings with O-Rings – Aluminum (OE Fix) (Part No.47065HP)

Heater Hose Fittings with O-Rings - Aluminum (OE Fix)

from

$20.49
Original equipment heater hose connectors on certain vehicles are made of brittle plastic that cracks and leaks. These Dorman OE FIX connectors are upgraded to aluminum for greater durability.

Product Features:
  • Upgraded replacement – these heater hose elbow connectors are made of aluminum instead of brittle plastic
  • Smart solution – reduces the likelihood of the same part failing again the same way
  • Complete set – includes both upper and lower elbow with O-ring seal
  • Application specific – made specifically for wide range of Chevrolet, Buick, Oldsmobile and Pontiac vehicles
See More

Dorman – Heater Hose Connector (Part No.800-403)

Heater Hose Connector

from

$16.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Heater Hose Connector- Coolant Connector (Part No.800-414)

Heater Hose Connector- Coolant Connector

from

$25.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dayco – HVAC Heater Hose Connector; Plastic, Dual Diameter Fits 1/2 Inch to 5/8 Inch (Part No.80425)

HVAC Heater Hose Connector; Plastic, Dual Diameter Fits 1/2 Inch to 5/8 Inch

from

$4.29
Designed for making various replacement heater hose configurations, and compatible with all traditional coolants and fuels, Dayco plastic connectors are glass-filled nylon connectors that feature a unique barbed end profile to ensure a leak-proof seal. These connectors also include anti-rotation ribs molded directly into the connector to prevent hose rotation and twisting and a circumferential flange that provides a hose stop to ensure the hose is inserted to the proper depth.

Product Features:
  •  Available in straight, “Y”, elbow, tee and reducing configurations
  •  Designed to accommodate 1/4″, 3/8″, 1/2″, 5/8″ and 3/4″ hose I.D.s
  •  Engineered to be compatible with traditional coolants and fuels
  • Made in the USA
See More

Dorman – Help – Chrysler Heater Hose Repair Kit (Part No.47238)

Chrysler Heater Hose Repair Kit

from

$17.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Help – Heater Hose Fittings with O-Rings – Plastic (Part No.47065)

Heater Hose Fittings with O-Rings - Plastic

from

$10.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Heater Hose Connector 5/8 x 5/8 (Part No.800-416)

Heater Hose Connector 5/8 x 5/8

from

$20.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Heater Hose Connector (Part No.800-404)

Heater Hose Connector

from

$17.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Buy HVAC Heater Pipe Lines Online and pickup at your local Hickory store

Dorman – Heating Ventilation Air Conditioning Heater Pipe (Part No.626-533)

Heating Ventilation Air Conditioning Heater Pipe

from

$119.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – 90 Degree Molded Heater Hose: Steel, Direct Replacement (Part No.626-229)

90 Degree Molded Heater Hose: Steel, Direct Replacement

from

$30.49
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Cooling Inlet Tube (Part No.626-547)

Engine Cooling Inlet Tube

from

$60.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Heater Hose Assembly (Part No.626-222)

Engine Heater Hose Assembly

from

$44.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Heater Hose Assembly (Part No.626-597)

Engine Heater Hose Assembly

from

$35.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Heater Hose Assembly (Part No.626-311)

Engine Heater Hose Assembly

from

$146.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Heater Hose Assembly (Part No.626-548)

Engine Heater Hose Assembly

from

$66.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Heater Hose Assembly (Part No.626-542)

Engine Heater Hose Assembly

from

$33.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Molded Heater Hose: Aluminum (Part No.626-634)

Molded Heater Hose: Aluminum

from

$113.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – HVAC Heater Pipe (Part No.626-573)

HVAC Heater Pipe

from

$39.99
This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Engine Heater Hose Assembly (OE Fix) (Part No.626-582)

Engine Heater Hose Assembly (OE Fix)

from

$77.99
Original engine heater pipes often fail due to brittle plastic construction. This Dorman OE FIX replacement has been upgraded to steel to prevent future failures and extend service life.

Product Features:
  • Upgraded material – this replacement engine heater pipe is made of steel for added durability
  • Application specific – made to directly replace the coolant return tube on specific Ford Super Duty vehicles from 2008 to 2010
  • Durable design – built to resist corrosion and coolant leaks for reliable performance
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Gates – Molded Heater Hose: Steel, Direct Fit, 0.75" Inside Diameter (Part No.CT102)

Molded Heater Hose: Steel, Direct Fit, 0.75" Inside Diameter

from

$156.99
Gates Coolant Tubing for the Heavy-Duty market features proprietary Tuffcoat plating for better rust resistance on straight tubes. State-of-the-art bending and forming technology and thicker wall tubing withstand the rigors of installation and harsh over-the-road conditions.

Product Features:
  • Made in USA
  • Thicker tube wall than OEM
  • Gates TuffCoat Plating
  • Silver-colored tubes allow for easier leak detection
See More
Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.