Find Heater Hoses in Durham, NC Near You

If you’re searching for heater hoses for your vehicle, whether it’s a car, truck, or van, you’re likely aware that these essential components can wear out over time. Heater hoses are vital for transporting engine coolant to the heater core, and issues can arise from cracks, leaks, or clogs. When selecting new heater hoses, consider the material durability, compatibility with your vehicle’s make and model, and the operating temperature range. Additionally, think about related parts that might also need attention, such as clamps, gaskets, or even the water pump and thermostat, which can all impact your vehicle’s heating system.

In Durham, you’ll find several Advance Auto Parts locations stocked with various options to ensure you find the perfect heater hose. Our store at 4304 Denfield St, Durham, NC 27704, is conveniently located near major highways, making it easy to drop by when you’re in need. You can reach us at (919) 477-8199 for any inquiries. Additionally, our other locations—like 1705 Holloway St, Durham, NC 27703, reachable at (919) 683-2031—often serve neighborhoods like East Durham, ensuring you’re never far from quality auto parts and services.

At Advance Auto Parts, we offer a variety of in-store services to enhance your shopping experience. Whether you need battery installation, engine (OBD-II) code scanning, or simply wish to take advantage of our same-day curbside pickup, we’ve got you covered. Our knowledgeable staff is here to assist with all your vehicle repair needs, helping you find the right part and ensuring you can get back on the road with minimal delay. Don’t hesitate to stop by and explore the extensive selection of heater hoses and related components we have to offer!

Show More Show Less

Compare Top Selling Heater Hoses and check availability at your local Durham store

Carquest Bulk Hose Tubing – Standard Heater Hose 5/8" I.D. (Sold Per Foot) (Part No.CQ1726)

Standard Heater Hose 5/8" I.D. (Sold Per Foot)

from

$1.99
Product Features:
  • Sold per foot
  • Replacement coolant hose for most cars and light trucks.
  • This standard-duty hose is similar to the SAE20R3 specification for normal-duty service.
  • The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.
See More

(39 reviews)
View Product

Carquest Bulk Hose Tubing – Bulk Standard Heater Hose 1" I.D. (12 inches) (Part No.CQ1828-25)

Bulk Standard Heater Hose 1" I.D. (12 inches)

from

$2.49
This bulk item is sold Per Foot. Replacement coolant hose for most cars and light trucks. This standard-duty hose is similar to the SAE20R3 specification for normal-duty service. The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.
See More

(2 reviews)
View Product

Carquest Bulk Hose Tubing – Bulk Standard Heater Hose 1/2" I.D. (Sold by the foot) (Part No.CQ1725)

Bulk Standard Heater Hose 1/2" I.D. (Sold by the foot)

from

$1.99
Replacement coolant hose for most cars and light trucks. This standard-duty hose is similar to the SAE20R3 specification for normal-duty service. The hose withstands the abuse of corrosive solutions and additives, and is weathering resistant for long life.

Product Features:
  • This bulk item is sold Per Foot
  • 1/2″ ID
  • Standard duty replacement heater hose for most cars and light trucks
  • Temperature Specification: -40 – 212 Deg. F
See More

(3 reviews)
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71877)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter

from

$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

(44 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length (Part No.87793)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 21 Inch Length

from

$51.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(12 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length (Part No.87771)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(19 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length (Part No.87792)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(8 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length (Part No.80406)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length

from

$18.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

(4 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 26 1/2 Inch Length (Part No.88429)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 26 1/2 Inch Length

from

$56.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(4 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 1/2 Inch Length (Part No.88389)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 1/2 Inch Length

from

$36.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(16 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length (Part No.87739)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length

from

$36.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(12 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length (Part No.80407)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length

from

$17.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

(2 reviews)
View Product

Dorman – Engine Heater Hose Assembly (OE Fix) (Part No.626-314HP)

Engine Heater Hose Assembly (OE Fix)

from

$138.99
Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic Y-connector. This Dorman OE FIX replacement features an upgraded aluminum Y-connector to prevent similar failures in the future.

Product Features:
  • Upgraded material – this replacement engine heater hose assembly features aluminum Y-connectors for added durability
  • Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
  • Complete replacement – hoses come with necessary clamps for easy installation
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

(11 reviews)
View Product

Dorman – Molded Heater Hose: Rubber/Plastic (Part No.626-522)

Molded Heater Hose: Rubber/Plastic

from

$90.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

(4 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length (Part No.87684)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length

from

$44.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(2 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length (Part No.87785)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 Inch Length

from

$29.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(5 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 3/4 Inch Length (Part No.87617)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 3/4 Inch Length

from

$29.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(4 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 7 Inch Length (Part No.88395)

Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 7 Inch Length

from

$14.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(2 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length (Part No.86122)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length

from

$20.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(6 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 Inch Length (Part No.87835)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 Inch Length

from

$15.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(3 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 22 Inch Length (Part No.88459)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 22 Inch Length

from

$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(1 reviews)
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, .75" Diameter (Part No.E72728)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, .75" Diameter

from

$83.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

(2 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 12 Inch Length (Part No.87763)

Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 12 Inch Length

from

$40.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

(4 reviews)
View Product

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80403)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length

from

$13.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

(4 reviews)
View Product

Local Durham Auto Parts Stores for Heater Hoses

Advance Auto Parts #4117
4304 Denfield St
Durham, NC 27704
(919) 477-8199
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #4360
1705 Holloway St
Durham, NC 27703
(919) 683-2031
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #4660
3301 Hillsborough Rd
Durham, NC 27705
(919) 383-5541
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6747
1114 W Nc Highway 54
Durham, NC 27707
(919) 490-0981
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6759
5114 Wake Forest Rd
Durham, NC 27703
(919) 596-4905
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #7048
2206 N Roxboro St
Durham, NC 27704
(919) 220-4239
Get Directions Go to Store Page Check Availability at This Store

Get Heater Hoses near 4304 Denfield St

Get Directions View Store Page
Advance Auto Parts #4117

Stop by the Advance Auto Parts store #4117 located at 4304 Denfield St, Durham, NC for Heater Hoses for your car, truck, or van. Conveniently situated to serve drivers in 27704 as well as nearby ZIP codes like 27514, 27515, and 27516, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (919) 477-8199.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Heater Hose or taking advantage of the free services available, this Durham store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
4304 Denfield St
Durham, NC 27704
(919) 477-8199 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Heater Hoses near 1705 Holloway St

Get Directions View Store Page
Advance Auto Parts #4360

Stop by the Advance Auto Parts store #4360 located at 1705 Holloway St, Durham, NC for Heater Hoses for your car, truck, or van. Conveniently situated to serve drivers in 27703 as well as nearby ZIP codes like 27514, 27515, and 27516, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (919) 683-2031.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Heater Hose or taking advantage of the free services available, this Durham store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
1705 Holloway St
Durham, NC 27703
(919) 683-2031 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Heater Hoses near 3301 Hillsborough Rd

Get Directions View Store Page
Advance Auto Parts #4660

Stop by the Advance Auto Parts store #4660 located at 3301 Hillsborough Rd, Durham, NC for Heater Hoses for your car, truck, or van. Conveniently situated to serve drivers in 27705 as well as nearby ZIP codes like 27514, 27515, and 27516, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (919) 383-5541.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Hydraulic Hose Assemblies, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day Home Delivery, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Heater Hose or taking advantage of the free services available, this Durham store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
3301 Hillsborough Rd
Durham, NC 27705
(919) 383-5541 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Hydraulic Hose Assemblies
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day Home Delivery
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Heater Hoses near 1114 W Nc Highway 54

Get Directions View Store Page
Advance Auto Parts #6747

Stop by the Advance Auto Parts store #6747 located at 1114 W Nc Highway 54, Durham, NC for Heater Hoses for your car, truck, or van. Conveniently situated to serve drivers in 27707 as well as nearby ZIP codes like 27514, 27515, and 27516, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (919) 490-0981.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Heater Hose or taking advantage of the free services available, this Durham store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
1114 W Nc Highway 54
Durham, NC 27707
(919) 490-0981 Store Location Map
Store Hours
Monday 8:00 am-9:00 pm
Tuesday 8:00 am-9:00 pm
Wednesday 8:00 am-9:00 pm
Thursday 8:00 am-9:00 pm
Friday 8:00 am-9:00 pm
Saturday 8:00 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Heater Hoses near 5114 Wake Forest Rd

Get Directions View Store Page
Advance Auto Parts #6759

Stop by the Advance Auto Parts store #6759 located at 5114 Wake Forest Rd, Durham, NC for Heater Hoses for your car, truck, or van. Conveniently situated to serve drivers in 27703 as well as nearby ZIP codes like 27514, 27515, and 27516, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (919) 596-4905.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Oil Filter Recycling, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Heater Hose or taking advantage of the free services available, this Durham store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
5114 Wake Forest Rd
Durham, NC 27703
(919) 596-4905 Store Location Map
Store Hours
Monday 8:00 am-9:00 pm
Tuesday 8:00 am-9:00 pm
Wednesday 8:00 am-9:00 pm
Thursday 8:00 am-9:00 pm
Friday 8:00 am-9:00 pm
Saturday 8:00 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Oil Filter Recycling
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Heater Hoses near 2206 N Roxboro St

Get Directions View Store Page
Advance Auto Parts #7048

Stop by the Advance Auto Parts store #7048 located at 2206 N Roxboro St, Durham, NC for Heater Hoses for your car, truck, or van. Conveniently situated to serve drivers in 27704 as well as nearby ZIP codes like 27514, 27515, and 27516, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (919) 220-4239.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Heater Hose or taking advantage of the free services available, this Durham store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
2206 N Roxboro St
Durham, NC 27704
(919) 220-4239 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes
Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.

Find Heater Hoses Nearby to Durham