Find Oil Cooler Hoses in Sioux City, IA

If you’re on the lookout for Oil Cooler Hoses for your car, truck, or van, it’s essential to ensure you’re considering a few key factors before making a purchase. Oil cooler hoses play a critical role in maintaining your vehicle’s cooling system, and any damage or wear could lead to overheating or oil leaks. When selecting new hoses, consider the material, length, and fitting type to ensure a proper fit. Additionally, you may want to check related components such as clamps, seals, and the oil cooler itself, as these parts may also require replacement during repairs or routine maintenance.

In Sioux City, there are two convenient locations where you can find the parts you need. Visit the Advance Auto Parts Store at 3129 Gordon Dr Sioux City, IA 51105, and give them a call at (712) 252-9696. Alternatively, you can head over to the Carquest Store located at 423 W 7th St Sioux City, IA 51103, where you can reach their team at (712) 233-2354. Both stores are easily accessible from major highways and neighborhoods, making it simple for you to drop by and get the parts that keep your vehicle running smoothly.

In addition to a wide selection of Oil Cooler Hoses, both stores offer a range of in-store services designed to assist you with your automotive needs. From battery installation and engine code scanning to loaner tools and curbside pickup, you’ll find expert help to ensure your vehicle receives the care it deserves. So whether you’re tackling a DIY repair or just checking on maintenance, our friendly staff is here to help you find the right solutions.

Show More Show Less

Buy Engine Oil Cooler Hoses Online and pickup at your local Sioux City store

from

$54.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$54.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$61.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$37.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$36.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$43.49

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$55.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$45.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$54.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$64.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$134.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$122.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

Local Sioux City Auto Parts Stores for Oil Cooler Hoses

Advance Auto Parts #1950

3129 Gordon Dr
Sioux City, IA 51105

(712) 252-9696

Get Directions Go to Store Page Check Availability at This Store

Carquest Auto Parts #4381

423 W 7th St
Sioux City, IA 51103

(712) 233-2354

Get Directions Go to Store Page Check Availability at This Store

Advance Auto Parts #6136

2201 Hamilton Blvd
Sioux City, IA 51104

(712) 277-0123

Get Directions Go to Store Page Check Availability at This Store

Buy Trans Oil Cooler Hoses Online and pickup at your local Sioux City store

from

$2.49

The hose circulates transmission fluid at high temperatures. The tube and cover are designed to meet OEM and SAE J1532 performance requirements. Features a polyester reinforcement for high burst protection. Will withstand fluid temperatures up to 257°F and is resistant to fuel, ozone, oil, grease and heat aging.

Product Features:

Similar to the SAE J1532 Specification
This item is sold in bulk quantities and only available for in store pick up

from

$2.49

Similar to the SAE J1532 Specification
This item is sold in bulk quantities and only available for in store pick up

from

$4.29

For use on the return side only. Built of a high-quality NBR tube to resist power steering fluid and features polyester reinforcement for high burst strength. NBR/PVC cover provides moderate oil resistance and good weather, ozone and abrasion resistance for long life.

Product Features:

Similar to the SAE J189 Specification

from

$7.99

Provides a safe, heat and oil resistant connecting line between oil cooler and transmission.

Product Features:

Easy-to-follow instructions and hose diameter indicator in each package
Nitrile tube, black CSM cover oil and abrasion resistant
Braided synthetic fiber-reinforced cord for increased strength
Meets or exceeds SAE 100R6
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Maximum temperature rating: +300 Deg. F (+150 Deg. C)
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$5.99

Provides a safe, heat and oil resistant connecting line between oil cooler and transmission.

Product Features:

Easy-to-follow instructions and hose diameter indicator in each package
Nitrile tube, oil and abrasion-resistant black CSM cover
Braided synthetic fiber-reinforced cord for increased strength
Meets or exceeds SAE 100R6
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Maximum temperature rating: +300 Deg. F (+150 Deg. C)
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$3.99

Designed to connect the transmission to an external cooler; or as a return line between the power steering mechanism and the hydraulic pump, Dayco’s transmission Oil Cooler/Power Steering Return Line Hose has a synthetic rubber tube and cover to resist oil, ozone, and aging due to heat. Reinforced with braided cord for increased strength, this hose has a working pressure of 250psi. It is designed to handle transmission oil temperatures up to +257 Degree F (+125 Degree C). Similar to SAE J189 type hose. Note: NOT suitable for power steering pressure lines.

Product Features:

Has a synthetic rubber tube and cover to resist oil, ozone, and aging due to heat
Reinforced with braided cord for increased strength, this hose has a working pressure of 250psi
Handles transmission oil temperatures up to +257 Degree F (+125 Degree C)
Made in the USA
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$2.99

Has a synthetic rubber tube and cover to resist oil, ozone, and aging due to heat
Reinforced with braided cord for increased strength, this hose has a working pressure of 250psi
Handles transmission oil temperatures up to +257 Degree F (+125 Degree C)
Made in the USA
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.

Find Oil Cooler Hoses in Sioux City, IA

Buy Engine Oil Cooler Hoses Online and pickup at your local Sioux City store

Dorman – Oil Cooler Coolant Pipe (Part No.902-098)

Dorman – Engine Oil Cooler Line (Part No.625-150)

Dorman – Engine Oil Cooler Line (Part No.625-179)

Dorman – Engine Oil Cooler Line (Part No.625-140)

Dorman – Engine Oil Cooler Line (Part No.625-139)

Dorman – Engine Oil Cooler Line (Part No.625-503)

Dorman – Engine Oil Cooler Line (Part No.625-163)

Dorman – Engine Oil Cooler Line (Part No.625-632)

Dorman – Engine Oil Cooler Line (Part No.625-621)

Dorman – Engine Oil Cooler Line (Part No.625-630)

Dorman – Engine Oil Cooler Line (Part No.625-022)

Dorman – Engine Oil Cooler Lines (Part No.625-209)

Local Sioux City Auto Parts Stores for Oil Cooler Hoses

Oil Cooler Hoses Categories

Buy Trans Oil Cooler Hoses Online and pickup at your local Sioux City store

Carquest Bulk Hose Tubing – Transmission Oil Cooler Hose (Part No.CQ31616)

Carquest Bulk Hose Tubing – Transmission Oil Cooler Hose (Part No.CQ32998)

AutoCraft – Power Steering Return Hose (Part No.AC3820P)

Gates – Transmission Oil Cooler Hose (Sold by foot) (Part No.27059)

Gates – Transmission Oil Cooler Hose (Sold by foot) (Part No.27058)

Dayco – Reinforced Transmission Oil Cooler/Power Steering Return Hose; 3/8 In. (sold by foot) (Part No.80391)

Dayco – Reinforced Transmission Oil Cooler/Power Steering Return Hose; 5/16 In. (sold by foot) (Part No.80383)

Find Oil Cooler Hoses Nearby to Sioux City

Find Other Belts and Hoses in Sioux City

Find Specific Oil Cooler Hoses in Sioux City

Oil Cooler Hoses for Popular Makes & Models in Sioux City