Find Ignition Kits in Griffin, GA

If you’re in Griffin and looking for Ignition Kits or other parts related to Ignition and Tune-Up for your car, truck, or van, Advance Auto Parts offers quality products and reliable service. With prices ranging from $1.99 to $1,141.99 and trusted brands like PerTronix, Dorman, and Carquest Premium you’ll find exactly what you need to keep your vehicle starting strong. Visit the Advance Auto Parts store at 310 W Taylor St, Griffin or call (770) 228-2112, or the Advance Auto Parts store at 201 Vineyard Rd, Griffin or call (770) 467-6559. Most store locations are open 7 days a week for your convenience.

These stores also provide a variety of in-store services to help support your repair and maintenance needs. You can take advantage of Battery Installation, Battery Recycling, Charging & Starting System Testing, Engine (OBD-II) Code Scanning, Loaner Tools, Motor & Gear Oil Recycling, Same Day Curbside Pickup, Same Day In Store Pickup, and Wiper Blade Installation. Whether you’re diagnosing a problem or replacing a part, these services are designed to save time and make the job easier.

For anyone tackling an Ignition Kit issue or simply needing a quality replacement part, Advance Auto Parts in Griffin are here to help. With dependable parts, helpful staff, and convenient locations, you can count on getting the right solution for your vehicle’s starting and charging systems.

Buy Points and Condensers and Kits Online and pickup at your local Griffin store

Carquest – Contact Set (Points) (Part No.A101V)

Contact Set (Points)

from

$16.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
  • Thermoplastic housing withstands heat stress for enhanced durability
  • Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
  • External core made from oriented silicon steel ensures durability and longevity
See More

ACDelco – Ignition Capacitor (Part No.D204)

Ignition Capacitor

from

$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Contact Set (Points) (Part No.A97H)

Contact Set (Points)

from

$15.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Battery Hold Down
  • Base mount design
  • Includes steel and fiber washer (1 ea.) and bolt
  • Securely holds battery in place. Prevents shifting within engine compartment that can cause damage to the battery or other parts
  • A premier manufacturer serving the automotive aftermarket since 1919, we deliver the highest quality and best coverage to meet your ignition needs
See More

Carquest – Ignition Condenser, Capacitance Rating: 0.18-0.23 (Part No.G120A)

Ignition Condenser, Capacitance Rating: 0.18-0.23

from

$20.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Offering hundreds of high-quality pigtails & sockets for nearly every electrical job
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
See More

Accel – Contact And Condenser Kit (Part No.8104)

Contact And Condenser Kit

from

$74.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.

Product Features:
  • High Performance Points and Condenser
  • With Integral Conductor
See More

ACDelco – Ignition Distributor Contact Set (Part No.D1007)

Ignition Distributor Contact Set

from

$45.99
ACDelco Professional Ignition Contact Set is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket set is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Ignition Condenser (Part No.GAA1034)

Ignition Condenser

from

$22.49
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Ignition Contact Set (Part No.AKA1001)

Ignition Contact Set

from

$15.99
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Driveworks – Contact Set (Points) (Part No.12002)

Contact Set (Points)

from

$8.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Ignition Contact Set and Condenser Kit (Part No.ALA1001)

Ignition Contact Set and Condenser Kit

from

$38.99
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Ignition Contact Set (Part No.APA1048)

Ignition Contact Set

from

$22.49
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Ignition Contact Set (Part No.AKA1002)

Ignition Contact Set

from

$28.99
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Local Griffin Auto Parts Stores for Ignition Kits

Advance Auto Parts #9681
310 W Taylor St
Griffin, GA 30223
(770) 228-2112
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #9682
201 Vineyard Rd
Griffin, GA 30223
(770) 467-6559
Get Directions Go to Store Page Check Availability at This Store

Buy Ignition Conversion Kits Online and pickup at your local Griffin store

PerTronix – Ignitor for Ford 8 Cylinder Engines – Increased Power & Fuel Economy (Part No.1281)

Ignitor for Ford 8 Cylinder Engines - Increased Power & Fuel Economy

from

$125.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition.

Product Features:
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
  • 2:1 improvement over “points” in current fall time for increased coil output.
  • Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
  • Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
  • Stable timing; no need for any adjustments.
See More

PerTronix – 91281 Ignitor II Adaptive Dwell Control Ford 8 cyl (Part No.91281)

91281 Ignitor II Adaptive Dwell Control Ford 8 cyl

from

$183.99
The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
  • Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
  • Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
  • Synchronized peak current and spark timing reduces heat build-up.
  • Senses startup and develops more energy for quicker, easier starting.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
See More

PerTronix – 91381A Ignitor II Adaptive Dwell Control Chrysler 8 cyl (Part No.91381A)

91381A Ignitor II Adaptive Dwell Control Chrysler 8 cyl

from

$183.99
The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
  • Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
  • Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
  • Synchronized peak current and spark timing reduces heat build-up.
  • Senses startup and develops more energy for quicker, easier starting.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
See More

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

Mallory Kit: Unil Conv: Delco: V8

from

$152.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

PerTronix – 91261 Ignitor II Adaptive Dwell Control Ford 6 cyl (Part No.91261)

91261 Ignitor II Adaptive Dwell Control Ford 6 cyl

from

$192.99
The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
  • Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
  • Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
  • Synchronized peak current and spark timing reduces heat build-up.
  • Senses startup and develops more energy for quicker, easier starting.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
See More

PerTronix – D8000 Flame-Thrower Gm Hei Tune Up Chevrolet/Cadillac Kit Black Cap (Part No.D8000)

D8000 Flame-Thrower Gm Hei Tune Up Chevrolet/Cadillac Kit Black Cap

from

$179.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM

Product Features:
  • Kits include street-strip 4-pin module and coil combination.
  • Custom Flame-Thrower coil cover, adjustable vacuum advance canister, hi-performance advance kit.
  • Wire harness and capacitor, and complete installation hardware.
  • Race Only
See More

PerTronix – 1261 Ignitor Ford 6 cyl (Part No.1261)

1261 Ignitor Ford 6 cyl

from

$135.99
The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
  • 2:1 improvement over “points” in current fall time for increased coil output.
  • Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
  • Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
  • Stable timing; no need for any adjustments.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
See More

PerTronix – High-Performance Electronic Ignition for Delco 8-Cylinder Engines (Part No.1181)

High-Performance Electronic Ignition for Delco 8-Cylinder Engines

from

$125.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition.

Product Features:
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
  • 2:1 improvement over “points” in current fall time for increased coil output.
  • Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
  • Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
  • Stable timing; no need for any adjustments.
See More

PerTronix – 1741 Ignitor Datsun 4 cyl (Part No.1741)

1741 Ignitor Datsun 4 cyl

from

$144.99
The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
  • 2:1 improvement over “points” in current fall time for increased coil output.
  • Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
  • Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
  • Stable timing; no need for any adjustments.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
See More

PerTronix – 91181 Ignitor II Adaptive Dwell Control Delco 8 cyl (Part No.91181)

91181 Ignitor II Adaptive Dwell Control Delco 8 cyl

from

$185.99
The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
  • Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
  • Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
  • Synchronized peak current and spark timing reduces heat build-up.
  • Senses startup and develops more energy for quicker, easier starting.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
See More

PerTronix – D8001 Flame-Thrower Gm Hei Tune Up Chevrolet/Cadillac Kit Red Cap (Part No.D8001)

D8001 Flame-Thrower Gm Hei Tune Up Chevrolet/Cadillac Kit Red Cap

from

$179.99
Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM

Product Features:
  • Kits include street-strip 4-pin module and coil combination.
  • Custom Flame-Thrower coil cover, adjustable vacuum advance canister, hi-performance advance kit.
  • Wire harness and capacitor, and complete installation hardware.
  • Race Only
See More

PerTronix – 1548 Ignitor Prestolite 4 cyl (Part No.1548)

1548 Ignitor Prestolite 4 cyl

from

$168.99
The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
  • 2:1 improvement over “points” in current fall time for increased coil output.
  • Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
  • Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
  • Stable timing; no need for any adjustments.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)
See More

Buy Ignition Knock (Detonation) Sensor Kits Online and pickup at your local Griffin store

Dorman – Knock Sensor and Harness Kit (Part No.926-084)

Knock Sensor and Harness Kit

from

$103.99
Check engine light on and vehicle running rough- Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.

Product Features:
  • Complete solution – this knock sensor kit includes two knock sensors and the wiring harness that connects them
  • Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
  • Quality assured – benchmarked against original components for performance and quality
  • Excellent value – original equipment quality at significant cost savings
See More

Dorman – Engine Knock Sensor and Harness Kit (Part No.962-705)

Engine Knock Sensor and Harness Kit

from

$79.99
Check engine light on and vehicle running rough. Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.

Product Features:
  • Complete solution – this knock sensor kit includes a knock sensor and the wiring harness electrical connector
  • Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
  • Quality assured – benchmarked against original components for performance and quality
  • Excellent value – original equipment quality at significant cost savings
See More

Dorman – Engine Knock Sensor and Harness Kit (Part No.987-014)

Engine Knock Sensor and Harness Kit

from

$70.99
Check engine light on and vehicle running rough? Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.

Product Features:
  • Complete solution – this knock sensor kit includes a knock sensor and the wiring harness electrical connector
  • Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
  • Quality assured – benchmarked against original components for performance and quality
  • Excellent value – original equipment quality at significant cost savings
See More

Dorman – Engine Knock Sensor and Harness Kit (Part No.962-700)

Engine Knock Sensor and Harness Kit

from

$60.99
Check engine light on and vehicle running rough. Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.

Product Features:
  • Complete solution – this knock sensor kit includes a knock sensor and the wiring harness electrical connector
  • Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
  • Quality assured – benchmarked against original components for performance and quality
  • Excellent value – original equipment quality at significant cost savings
See More
Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.