Lincoln MKZ Parts

Lincoln MKZ Body Parts

from

$197.99

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:

Made Of Advanced High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$102.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Bumper Cover Grille, Black With Chrome Molding, for Use From 09/05/2006 Production Date. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Black With Chrome Molding, For Use From 09/05/2006 Production Date, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$107.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$16.99

New Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$20.99

This door jamb switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door jamb switch is made to match the fit and performance of the original switch on specific vehicle applications.
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.99

from

$72.99

New Standard Replacement Front Bumper Cover Lower Molding, Chrome

Product Features:

Chrome, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.49

Heated Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Replace your cracked or broken passenger side Mirror glass at a fraction of the dealer cost
Wiring harness must be unplugged from existing backing plate and plugged into the new backing plate before installation
Original equipment quality, fit, and function
Step-by-step instructions for easy installation
Heated

from

$289.99

New CAPA Certified Premium Replacement Rear Bumper Cover Reinforcement Bar

Product Features:

Made Of Advanced High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$69.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$52.99

This trunk lid release switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this trunk lid release switch is made to match the fit and performance of the original switch on specific vehicle applications.
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$104.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$52.99

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$67.99

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
Durable construction -manufactured within strict tolerances for reliable longevity.
Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$22.49

This hood release handle bracket is designed to hold the interior hood release handle and ensure a reliable connection between the handle and the hood release cable on specified vehicles. Check the application details to ensure correct fitment.

Product Features:

Direct replacement – this hood release handle bracket is designed to hold the hood release handle and ensure a reliable connection between the handle and the hood release cable on specified vehicles.
Ideal solution – seamlessly replaces an original equipment bracket that is missing, broken, or no longer securely holds the release handle or cable
Durable construction – this bracket is made from quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$58.99

New Standard Replacement Passenger Side Fender Bracket

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$45.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$55.99

This fuel door hinge is designed to match the fit and function of the original hinge on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel door hinge is designed to match the fit and function of the original hinge on specified applications.
Restores functionality – this hinge is made to fully restore part functionality after the original hinge fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.49

This door latch cable matches the dimensions of the original equipment cable to restore proper function. Made of quality materials for reliable service, this part has been tested for a dependable fit.

Product Features:

Ideal replacement – this door latch cable matches the dimensions of the original equipment cable to restore function.
Durable construction – this cable is made using quality materials to ensure reliable service.
Cost-effective solution – offers original equipment function at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$139.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$271.99

New CAPA Certified Standard Replacement Front Bumper Cover Reinforcement Bar

Product Features:

Made Of High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$49.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$28.49

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

Lincoln MKZ Transmission Parts

from

$83.99

This transaxle input speed sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transaxle input speed sensor is designed to match the fit and function of the original sensor on specified vehicles.
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction.
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3513.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$12.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$19.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$49.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 13-21; LINCOLN 13-21; VOLVO 11-15;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2011-2021
Weight approx: 3 Lbs

from

$119.99

from

$66.99

from

$693.99

AT MASTER REPAIR KIT

from

$16.99

When the transmission linkage clips break on many Ford, Lincoln and Mercury vehicles, you usually have to replace the entire shifter cable assembly. This Dorman OE FIX clip allows direct replacement of only the failed original clip, saving money.

Product Features:

Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles.
Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
Application specific – made for certain Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$97.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$17.99

CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:

Lifecycle tested to meet or exceed OE specifications
Direct OE replacement
High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
Global coverage for import and/or domestic applications.

from

$10.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$59.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems

from

$39.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$15.49

from

$4.79

Product Features:

Brand may vary by location

from

$95.99

from

$79.50

Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of motor mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.

Product Features:

USA Development and OEM laboratory – 14 OEM Engineers
Design Solutions and Installation Enhancements to Failing OEM designs
Complete Factory Testing and Vehicle Verification Resources

from

$8.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$19.29

This automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles.
Restores functionality – reliable replacement for an original dipstick that has bent or broken due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$104.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$117.15

AT Oil Cooler Hose A

from

$382.24

Dorman’s OE FIX repair solution addresses a common failure mode found in the original Transmission Control Module (TEHCM) design. The original TEHCM design uses a material called Kapton for its pressure switch film; that is not durable enough to maintain its proper form when the TEHCM becomes contaminated. All Dorman’s TEHCMs are completely remanufactured using a material called Polyether Ether Ketone, also known as PEEK. PEEK is a form of plastic that is resistant to thermal decomposition and remains in its original form with it comes in contact with debris. Additionally, our TEHCM units include 100% replacement of gaskets, grommets, and seals for a complete repair.

Product Features:

Software Transfer Tool included with every GM TEHCM unit, eliminating a costly trip to the Dealer
Direct replacement restores the ability to shift the vehicle in and out of gear without hesitation or rough shift
Fully remanufactured and vehicle simulator tested for durability and quality assurance
Includes upgraded materials

Lincoln MKZ Automotive Accessories

from

$81.99

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$117.99

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$19.99

This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

from

$69.99

Autocraft Easy Fit Car Cover offers superior protection against dirt, dust, rain and snow. Protects against acid rain, pollution and color fading UV rays. Durable, reinforced seams and elastic hems. Convenient storage bag included.

Product Features:

Medium weight, breathable, non-abrasive fabric
Water repellent, protects against mold and mildew
Full elastic hem with reinforced grommets
Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
2 built-in reinforced grommets and 1 rope are included to keep your cover in place
Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna.

from

$99.99

The Budge Rain Barrier car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a tan color. Includes a storage bag and antenna patch. Our car covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 228″ L x 60″ W x 51″ H.

Product Features:

This car cover fits cars 228″ L x 60″ W x 51″ H.
This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
This vehicle cover features ultrasonically welded seams for extra durability
Elasticized hem and sewn-in grommets hold your car cover in place in windy-conditions

from

$69.99

AVS In-Channel Ventvisor® offers a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle. AVS; the creator of the side window deflector category, lets fresh air in while keeping rain out. The best exterior window protection with a large selection of window deflectors and for cars, trucks, SUV’s and CUV’s.

Product Features:

Precision engineered for a custom fit on your vehicle with modern, curved low-profile design
Installs in the window channel for a sleek, aerodynamic appearance
Made from durable, impact-resistant acrylic
Available in dark smoke finish

from

$49.99

AVS Ventshade(R) is the original AVS product. Offered for many classic vehicles it is the standard that created the side window deflector industry. With a ledge profile, the AVS Ventshade® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Enjoy fresh air and comfort no matter the weather!

Product Features:

Ledge profile that is mounted in the window channel for a secure mount
Keeps rain out and lets fresh air in
Manufactured from high-quality steel
Available in polished stainless and black finishes
Quick and easy installation

from

$99.99

The Rightline Gear Car Top Duffle Bag is a 100% waterproof gear bag that you can pack, strap to the roof of your vehicle, transport, and then carry wherever you need to go. Attach (1) to (4) Duffle Bags to vehicles WITH or WITHOUT a roof rack. Each bag comes with a removable shoulder strap that can be stored in the bag’s zippered side pocket when not in use. The bag is made from tough PVC Coated Mesh that is re-enforced for strength and UV protected. The Car Top Duffle Bag defines travelling efficiency!

Product Features:

Capacity: 4.3 cu ft
Dimensions: 36″ L x 16″ W x 13″ H
100% Waterproof with welded seams, urethane coated zippers, and a hook-&-loop-close zipper cover
Designed to be used on any size vehicle, WITH or WITHOUT a roof rack
Includes: bag, shoulder strap, (2) attachment straps, (4) Car Clips, and set up guide
Includes: duffle bag, (2) nylon straps, (4) Car Clips, and complete set up guide

from

$63.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$89.99

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

Dimensions: 36″ L x 32″ W x 15″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
Weatherproof + with welded seams and a urethane coated zipper
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$109.99

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

Capacity: 10 cu ft
Dimensions: 36″ L x 30″ W x 16″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$129.99

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$129.99

Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
Custom Fit Car Mats
Anti Skid
Raised Borders
All Weather Protection
Odorless

from

$48.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$87.99

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

Freeze plug heater cartridge

from

$124.99

WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel. They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision machined to perfectly fit your vehicle s window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. approved glazing material. Available in light and dark tint for most vehicles.

Product Features:

Offers Maximum Fresh Air Enjoyment
Optically Transparent OEM Quality
Sleek Aerodynamic Styling
Reduced Wind Noise
No Unsightly Exterior Tape
Minimizes Interior Heat When Parked Helps Keep Side Windows Dry In The Rain
Precision Machined To Perfectly Fit Your Vehicle
Installed Inside The Window Channel

from

$69.99

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

Precision engineered for a custom fit on your vehicle with modern, curved design
Easy installation with no-drilling or special hardware required
Attaches easily with 3M automotive-grade adhesive above the window
Made from durable, impact-resistant acrylic
Available in dark smoke and chrome finishes

from

$159.99

Precision engineered for a custom fit on your vehicle with modern, curved design
Easy installation with no-drilling or special hardware required
Attaches easily with 3M(TM) automotive-grade adhesive above the window
Made from durable, impact-resistant acrylic
Available in dark smoke and chrome finishes

from

$29.49

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look.
Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
Reliable construction – keeps moisture and debris out of internal electronics for long service life
Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

from

$31.99

New Standard Replacement Undercar Shield, Fusion Models With 3.5 Liter V6, MKZ Models Built After 09/05/2006

Product Features:

Fusion Models With 3.5 Liter V6, MKZ Models Built After 09/05/2006, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$96.99

New Standard Replacement Undercar Shield, 2.0 Liter AWD Engines

Product Features:

2.0 Liter AWD Engines, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$85.99

New Standard Replacement Undercar Shield, 1.5/1.6/2.5/2.0 Liter FWD Engines

Product Features:

1.5/1.6/2.5/2.0 Liter FWD Engines, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$28.99

New Standard Replacement Undercar Shield, Mounts To Radiator Support

Product Features:

Mounts To Radiator Support, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Lincoln MKZ Interior Products

from

$49.99

from

$41.99

from

$279.99

If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Product Features:

Speedometer correction for multiple tire sizes
Adjustable tire size/gear ratio change
Return back to factory settings
Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
Internet updateable

from

$2.79

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$33.49

As part of the passenger compartment convenience system the Seat Track Position sensor reports the location of the power seat so that the seat can be commanded to return to a preset location. In many vehicles more than one operator can be programed so that with programed ignition keys and multiple remote buttons the seat will know more than one person.

from

$36.99

CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$228.32

Motorcraft multifunction switch assemblies meet the demands of the sophisticated electrical systems of current Ford and Lincoln vehicles.

Product Features:

For ease of installation, requires no cutting or splicing to adapt existing wiring and/or harnesses
Designed to fit Ford and Lincoln vehicles
Critical to driver and passenger safety
Recommended by Ford Motor Company

from

$72.99

from

$33.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$207.99

Brake Pedal Position Sensor

from

$58.99

from

$345.99

from

$212.99

from

$261.99

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
Semi┐custom To Fit The Size And Type Of Vehicle
Machine Washable, Making It An Easy Accessory For Any Family
Machine Washable
Designed To Fit Bench Style Rear Seats

from

$32.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$68.99

CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$359.99

Heated seats not working properly? The seat heater control module on certain Ford and Lincoln vehicles can be damaged from moisture and burn out over time, preventing the heated seats from operating properly. When that happens, if you try get a replacement from the dealership, you often have to buy the module and required pigtail connector separately. This complete kit includes both the module and the connector for a convenient, money-saving, reliable repair solution.

Product Features:

Convenient solution – this cost-effective seat heater control module with pigtail kit includes a replacement module and pigtail, saving hassle and expense of buying the two components separately from the dealer
Restores functionality – when the original ground pin or pigtail connector fails, this direct replacement kit restores the comfort and convenience of heated seats to original standards
Seamless replacement – module designed and tested to work exactly like the factory components for millions of select Ford and Lincoln vehicles
Trustworthy quality – backed by a team of electrical engineers and product experts in the United States and more than a century of automotive experience

from

$39.99

from

$108.50

Heated Seat Module C

from

$112.99

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$39.49

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness

from

$49.49

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$121.99

This air bag clockspring matches the fit of an original that is missing or damaged and is designed to restore current to the air bag, horn, and steering wheel-mounted controls on specified vehicles.

Product Features:

Direct replacement – reverse-engineered to match the original clockspring on specific vehicles.
Ideal solution – engineered to ensure proper restoration of air bag system performance.
Durable construction – designed, manufactured and tested to strict specifications for reliable service
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$41.99

Lincoln MKZ Engine Parts

from

$103.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 13-20; LINCOLN 13-20;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2013-2020
Weight approx: 5 Lbs
HYDRAULIC
PART GROUP: 3408, 3435

from

$361.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$102.42

Cyl. Head Bolt Set

from

$2.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$56.99

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
Durable construction – this part is made from quality materials to ensure a long service life.
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$116.99

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 2.0 Liter Ecoboost

Product Features:

2.0 Liter Ecoboost, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$92.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$113.99

Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

from

$69.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 06-09; LINCOLN 06-06; MERCURY 06-09;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2006-2009
Weight approx: 2 Lbs

from

$94.02

Turbo Mounting Gaske

from

$50.24

Thermostat Assembly

from

$874.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$34.49

Con Rod Bearing Set

from

$37.99

This turbocharger oil return tube is designed to match the fit and function of the original tube on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this turbocharger oil return tube is designed to match the fit and function of the original tube on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion or seal degradation.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$149.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles.
Complete assembly – includes replacement pan and drain plugs to match original components.
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$78.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
Durable construction – stringent specifications and careful construction help ensure longevity.
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$97.87

Motorcraft MAP sensors are the only MAP sensors recommended by Ford Motor Company for use in Ford and Lincoln vehicles.

Product Features:

New and remanufactured available to help meet your customers’ needs
Units come ready to plug and play, with no need for modifications
Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Design includes OE innovations and upgrades

from

$114.99

Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$19.79

This turbocharger stud is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance..

Product Features:

Direct replacement – this turbocharger stud matches the fit and function of the factory part on specified years, makes and models..
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$25.49

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$30.99

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

Made In USA. 4 OZ Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

from

$85.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

Looking for the best Lincoln MKZ aftermarket replacement parts? Replacing worn and broken parts on your Lincoln MKZ? Check out our online catalog to find the best selection of aftermarket Lincoln MKZ parts as well as real user reviews on Lincoln MKZ replacement parts. Make an informed decision about every component you add to your MKZ.

At Advance Auto, we’ve got you covered when it comes to getting your Lincoln MKZ in tip top condition. We’ve got over 2,987 Lincoln MKZ parts to choose from in popular categories like Body Parts, Transmission Parts and Automotive Accessories. If you’re looking for the best prices, try searching our Lincoln MKZ parts catalog to compare OEM and aftermarket parts for your Lincoln MKZ.

Whether you need Lincoln MKZ body parts, interior components, or custom Lincoln MKZ parts you can find them online at Advance Auto. Want to order your Interior Products online? Or maybe you need your Lincoln Engine Parts same day? No problem, you can pick up MKZ parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Lincoln MKZ parts has never been easier.

Advance Auto customers frequently search for the following types of Lincoln MKZ auto parts. Check out customer reviews and ratings, and compare prices on the following Lincoln MKZ parts:

People also search Advance Auto for these popular years of the Lincoln MKZ:

Lincoln MKZ Parts

KAI – Bumper Cover Reinforcement (Part No.FO1006253DSC)

KAI – New Standard Replacement Front Bumper Cover Grille, Black With Chrome Molding (Part No.FO1036133)

Carquest Premium – Hood Ajar Indicator Switch (Part No.DJA1022)

Le Bra – Custom Front End Cover (Part No.551601-01)

KAI – Fender Splash Shield (Part No.FO1250147)

Dorman – Door Ajar Switch (Part No.901-351)

Carquest Premium – Sunroof Switch (Part No.SBA2328)

KAI – Bumper Cover Molding (Part No.FO1044107)

K-Source – Passenger Car Replacement Mirror: Passenger Side, Convex, Includes Backing Plate (Part No.30207)

KAI – Bumper Cover Reinforcement (Part No.FO1106341DSC)

Burco – Door Mirror Replacement Glass (Part No.3928H)

Dorman – Rear Release Switch (Part No.901-209)

Carquest Premium – Door Lock Kit (Part No.TLC1375)

Dorman – Help – Interior Door Handle: Front Driver Side, Chrome (Part No.81702CD)

Dorman – Hood Release Cable Assembly (Part No.912-428)

Dorman – Help – Hood Release Handle Bracket (Part No.46911)

KAI – Fender Brace (Part No.FO1245103)

Dorman – Window Regulator: Power, 1 Pack (Part No.752-971)

Dorman – Fuel Door Hinge Assembly (Part No.924-803)

Dorman – Door Latch Release Cable (Part No.924-427)

Dorman – Door Lock Actuator – Integrated With Latch (Part No.937-684)

KAI – Bumper Cover Reinforcement (Part No.FO1006256C)

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1221)

Carquest Premium – Liftgate Release Switch (Part No.SBA4564)

Burco – Side View Replacement Mirror (Part No.4358)

Dorman – Transmission Output Speed Sensor (Part No.917-604)

Moveras – AWF21 – Automatic Transmission (Part No.M02083)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

National – Multi Purpose Seal (Part No.710561)

National – Multi Purpose Seal (Part No.710590)

Anchor – Transmission Mount: Left, 1 Piece (Part No.3327)

Carquest Premium – Automatic Transmission Pressure Control Solenoid (Part No.TCC1019)

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNA1485)

ATP – AT MASTER REPAIR KIT (Part No.FM-51)

Dorman – Help – Transmission Shift Cable Repair (Part No.14908)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCC1201)

Carquest Premium – Automatic Transmission Fluid Temperature Sensor (Part No.CAA1296)

National – Multi Purpose Seal (Part No.710546)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1541)

National – Multi Purpose Seal (Part No.711022)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

Carquest Premium – Neutral Safety Switch (Part No.CSA2052)

DEA – Engine Torque Rod (Part No.A7030375290DEA)

National – Multi Purpose Seal (Part No.221207)

Dorman – Help – Transmission Oil Dipstick: Direct Replacement, Stainless Steel (Part No.921-259)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-642)

Dorman – AT Oil Cooler Hose A (Part No.J2068700253DOR)

Dorman – Transmission Control (Part No.J25031225217DOR)

Covercraft – UVS100 Custom Sunscreen – Silver (Part No.UV11179SV)

Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV11295BL)

Fiamm – Freeway Blaster Low Note Horn (Part No.7211223)

AutoCraft – Car Cover, Blue 3 Layers, Fits Sedans 15′ 1"-16′ 8", Medium-Duty, Water Resistant, Outdoor Use (Part No.AC61)

Budge – Rain Barrier Car Cover, Grey Size 4: Fits Cars up to 228 in. L, Outdoor Protection (Part No.RSD-4)

Auto Ventshade (AVS) – Ventvisor Window Visors: In-Channel Mount, Smoke, Front And Rear, 4 Pc (Part No.194550)

Auto Ventshade (AVS) – Ventshade Window Visors: Outside Mount, Stainless Steel Finish, Front, 2 Pc (Part No.12091)

Rightline Gear – Car Top Duffle Bag (Part No.100D90)

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTA1298)

Rightline Gear – Range Jr Car Top Carrier (Part No.100R50)

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Black (Part No.2209121)

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.2209083)

Kat’s – Freeze Plug Heater (Part No.11409)

Kat’s – Engine Heater Cartridge (Part No.11815)

WeatherTech – Aerodynamic Design, In-Channel, Dark Smoke, Acrylic, Set Of 4 (Part No.82400)

Auto Ventshade (AVS) – Ventvisor Window Visors: Outside Mount, Smoke, Front And Rear, 4 Pc (Part No.94550)

Auto Ventshade (AVS) – Ventvisor Window Visors: Outside Mount, Chrome, Front And Rear, 4 Pc (Part No.684550)

Dorman – Help – Keyless Remote Case Repair (Part No.92063)

KAI – Undercar Shield (Part No.FO1228111)

KAI – Undercar Shield (Part No.FO1228127)

KAI – Undercar Shield (Part No.FO1228126)

KAI – Undercar Shield (Part No.FO1091100)

Carquest Premium – Combination Switch (Part No.SAC1594)

Carquest Premium – Instrument Panel Dimmer Switch (Part No.SBA3007)

Hypertech – Speedometer Calibrator – Ford Vehicles (Part No.742501)

Dorman – Nylon Trim Panel Clip (Part No.963-018)

Carquest Premium – Seat Track Position Sensor (Part No.CAA1174)

Carquest Premium – Air Bag Side Impact Sensor Connector (Part No.PTC2893)

Motorcraft – Motorcraft Combination Switch (Part No.P3010429245MTR)