Lexus RX350 Power Steering Parts

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

• Matches OE form, fit and function
• One piece neoprene boot (this is not a split boot)
• Includes boot and two clamps for complete installation.
• Quality construction for durability
• Application specific for this vehicle

RACK BELLOW

P/S Reservoir Line H

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

• 100% testing ensures leak-free performance.
• Designed to match O.E. fit, function and performance.
• Manufactured from O.E. grade material for strength and durability.
• Resistant to cracking caused by the high temperatures in the engine compartment.
• Reservoirs with integrated filter have the same filtration efficiency as O.E.

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

• Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
• Complete assembly – includes reservoir and reservoir cap.
• Reliable performance – built to withstand excessive heat and vibration
• Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE¿s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

• 100% replacement of rubber sealing components.
• Application of specialized lubricant(s) for extended life.
• Finished in protective coating to prevent corrosion and rust.
• Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:

• Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
• Performance testing ensures perfect fit, function and reliable performance.
• Computerized spool valve balancing ensures exceptional steering feel.
• Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
• Built to meet or exceed O.E.M. performance.

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

• Protective coating applied to each unit to extend the life of the unit (where applicable).
• 100% performance testing to ensure perfect fit, function and reliable performance.
• 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
• Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
• 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
• All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
• Valve housings have polished micro-finish sleeves for durability (where applicable).
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Our parts are 100% tested to verify both mechanical and electrical switching performance.
• Decades of industry leading research and development focused on meeting the technician’s needs
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

• Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
• Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
• Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
• Meets or exceeds O.E. performance.

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

• All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100% tested and calibrated pressure relief valves.
• FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

POWER STEERINGFILTER

Product Features:

• Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
• Small size provides an easy fit, even in cramped systems
• Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
• Filter can be easily serviced, extending its functional lifespan considerably

POWER STEERINGFILTER

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Zinc coated tubes protect against rust and corrosion
• Banjo end lock tabs prevent hose end from loosening
• Heat/abrasion tubing protects vital areas
• Restrictor helps absorb vibration and reduce noise

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Zinc coated tubes protect against rust and corrosion
• Banjo end lock tabs prevent hose end from loosening
• Heat/abrasion tubing protects vital areas
• Restrictor helps absorb vibration and reduce noise

To ensure the highest level of performance and long service life, Omega power steering hose assemblies are built and tested to the most stringent specifications in the industry, meeting or exceeding all OEM standards.

Product Features:

• OEM Style replacement assembly is designed to fit your car exactly like the unit you are replacing.
• All o-rings, sealing washers, adapters and mounting hardware necessary for installation are included.

Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• SAE J188 compliant high pressure rubber compound hose with internal noise absorber
• SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

P/S Pressure Hose