Jeep Wrangler Bumpers

New Standard Replacement Front Bumper To Body Filler Panel, Plastic [Upper Cover]

Product Features:

• Plastic [Upper Cover], Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Looking to add some versatility and style to your Wrangler? Look no further than the Rugged Ridge XHD Modular Bumper. No other bumper can give your Jeep this many looks.

Product Features:

• Textured Black
• 2.5 in. Tubing
• Modular Design
• Bolt-on

Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included).

Product Features:

• Stainless Steel
• With Raiser and Winch Cut Out
• Welded End Caps

Westins WJ2 Rear Bumper is constructed with 3/16-inch plate steel. This clean, stylish bumper is designed to work with factory or Westin hitches and features a bottom frame mount that prevents the bumper from rotating. Our WJ2 Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points, license plate locator, trailer plug, fender gap transition plates, camera back-up relocator and more. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

New Standard Replacement Driver Side Rear Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Front Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The XHD Aluminum Bumper System was designed for a whole new look while being extremely lightweight. The bumper is all aluminum but uses the current steel XHD D-rings and comes with a built in top filler plate.

Product Features:

• Aluminum
• Front

New Standard Replacement Driver Or Passenger Side Front Bumper Guard

Product Features:

• Made Of Rubber, Poly(Acrylic Acid Ester)
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Westin(TM) MAX(TM) Winch Mounting Systems are made to maximize your options for functional style. The MAX(TM) Winch Tray is suitable for the mounting of most major brand winches. The MAX(TM) System gives you the option of adding a MAX(TM) Bull Bar/Light B

Product Features:

• Features 3 in. Tube
• Accommodates Three 8 in. Lights
• No Drill Installation
• Winch Tray Sold Separately
• 3 Year Warranty

New Standard Replacement Rear Bumper, Black

Product Features:

• Black, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Economy Replacement Front Bumper Face Bar, Black

Product Features:

• Black, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Are you looking for protection or Rugged Ridge D rings? This pair of European styled XHD bumper tow point covers feature a hard-wearing injection molded plastic design that matches the factory one for an overall integrated look. For use with 11540.10 and

Product Features:

• Textured Black
• European Style
• Easily Removable
• Limited 5 Year Warranty

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

This three inch round black plastic tubular bumper end caps from Rugged Ridge presses in easily and will replace your missing caps for a completed look. Will fit most three inch tube bumpers. Sold individually.

Product Features:

• Black Plastic
• Press In
• Will Fit Most 3 in. Tube Bumpers
• Sold Individually
• Limited 5 Year Warranty

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Plastic
• OE Style
• Direct Fit
• Left Side
• Limited 5 Year Warranty

New Standard Replacement Front Bumper Cover Molding [Applique] Prime/Paint To Match Finish

Product Features:

• Made Of Olefinic Thermoplastic Elastomer
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Westins WJ2 Full Width Front Bumper with LED Light Bar Mount is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The product is designed to utilize both styles of factory fog lights or round post lights, and adjustable brackets accept Westin or competitor light bars. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins Rear Bumper is constructed with 3/16-inch plate steel. This clean, stylish bumper is designed to work with factory or Westin hitches and features a bottom frame mount that prevents the bumper from rotating. Our Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Stubby Bumper with Bull Bar is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The Bull Bar on our new WJ2 Stubby Bumper is designed to mount and protect your light bar. With our new WJ2 bumper product, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Bumper features Rock Light mount points on the lower corners of the bumper, 2 side and 2 front off-road jack points, and holes to hide light harness wires. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Optional skid plate sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Spartan Front Bumper

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:

• Made Of High Strength Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle