1987 Jeep Wrangler Bumpers

Westins WJ2 Stubby Bumper with Bull Bar is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The Bull Bar on our new WJ2 Stubby Bumper is designed to mount and protect your light bar. With our new WJ2 bumper product, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Bumper features Rock Light mount points on the lower corners of the bumper, 2 side and 2 front off-road jack points, and holes to hide light harness wires. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Optional skid plate sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Spartan Front Bumper

Spartan Front Bumper

This stainless steel bumper is constructed of thick 3-inch tubular steel and includes end caps. This bumper is as tough as it looks. Include all necessary hardware.

Product Features:

• Stainless Steel
• With Raiser
• Welded End Caps
• Limited 5 Year Warranty

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch and shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added winch protection and an aggressive look on the Jeep Wrangler JL or Jeep Gladiator, this bumper is also compatible with the stinger-style angular brush guard #2156050 (not included). The TrailCrusher bumper is fast and easy to install, integrating with the Jeep JL or Gladiator like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).

Product Features:

• Winch and shackle ratings of 12,500 lbs. for ultimate off-road functionality
• Standard winch mounting platform accepts most types of winches
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points with no pump relocation required
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Accepts angular brush guard #2156050 for added winch protection
• Center round cutouts accept OE bumper lights
• Includes mounting hardware and 3/8″ thick brackets for solid installation

Rugged Ridge Bumpers have been engineered to the industries most exacting specifications. All powder coated Rugged Ridge bumper products are E-coated to ensure a no rust finish. Rugged Ridge Bumpers can take small rock chips and still maintain their rust

Product Features:

• Stainless Steel
• With Raiser
• Welded End Caps
• Limited 5 Year Warranty

Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate

Product Features:

• Textured Black
• With Raiser and Winch Cut Out
• Welded End Caps
• Limited 5 Year Warranty

No other bumper can give your Jeep this many looks! The most versatile bumper system ever created, the XHD Modular Bumper System provides dozens of different looks and styles so you can customize your bumper the way you like it. This black powder-coated c

Product Features:

• Textured Black
• Aluminum
• Modular Design
• Winch Plate

Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate

Product Features:

• Gloss Black
• With Raiser and Winch Cut Out
• Welded End Caps
• Limited 5 Year Warranty

Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Each front bumper has two welded light tabs for easy mounting of offroad lighting.

Product Features:

• Textured Black
• Without Raiser
• Welded End Caps
• Limited 5 Year Warranty

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Pair
• OE Style
• Direct Fit
• Plastic
• Limited 5 Year Warranty

Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice!

Product Features:

• Textured Black
• Added Protection
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

New Standard Replacement Passenger Side Rear Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Rear Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Front Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Front Bumper End

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This textured black over-rider hoop from Rugged Ridge features 2.3 inch tubing and simply bolts to the XHD aluminum front bumpers. Its modular design will give your JK a whole new look to make your bumper stand out. Designed to be a whole new look while b

Product Features:

• Textured Black
• 2.3 in. Tube
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice!

Product Features:

• Textured Black
• Added Protection
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice!

Product Features:

• Textured Black
• Additional Storage
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

The stubby ends from Rugged Ridge feature a tough off road look while providing greater tire clearance for lifted Jeeps. The beefy black powder coated steel end caps extend out to the edge of the grille to offer protection, but leaves the wheel wells open

Product Features:

• Textured Black
• Added Protection
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

Westins WJ2 Rear Bumper is constructed with 3/16-inch plate steel and features 2 off-road jack mount points. This clean, stylish bumper is designed to work with factory or Westin hitches. Our WJ2 Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Bolt on installation so no drilling is required. Includes bumper, mounting hardware and install instructions.

Product Features:

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required – Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

Spartan Rear Bumper

What impression does your rear bumper leave? Tough looks? Heavy-duty construction? The Rugged Ridge XHD Rear Bumper System was designed to be tough enough to tackle anything you do! These bumpers feature easy installation, amazing looks and two reinforced

Product Features:

• Textured Black

This Classic Rock Crawler rear bumper has a frame mounted platform that features a heavy duty grid like system with an over built steel design with raised sides for the ultimate protection and greatest ground clearance. All Classic rear bumpers feature a

Product Features:

• Black
• Steel
• Low Profile
• Formed Ends

Taking the light weight theme further, we have developed steel inner framed Aluminum Rear Bumper Pods. These new lightweight Pods still allow for over sized tires but take a huge chunk of weight out of the bumper. (The picture shows the rear pods installe

Product Features:

• Textured Black
• Greater Approach Angle
• Modular Design
• Can Still Use The XHD Tire Carrier
• Limited 5 Year Warranty

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Westins WJ2 Rear Bumper with Tire Carrier is constructed with 3/16-inch plate steel with an 8 gauge tire carrier. The tire carrier is designed to work with or without factory or Westin hitches, and opens and closes with the tailgate. Tapered roller bearings and 2 turnbuckle heim links improve carrier rigidity while its bolt-on spindle allows adjustment of the carrier separate from the bumper. Features integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points, license plate locator, trailer plug, fender gap transition plates, camera back-up relocator and more. Offers a bottom frame mount that helps prevents the bumper from rotating. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

All Rugged Ridge bumpers feature smooth ground welds for an unbelievable look and further rust protection. No other tubular bumper manufacturer goes to the expense of smooth grinding their welds. This exclusive smooth grind process virtually eliminates sm

Product Features:

• Textured Black
• Allows Oversized Spare Tire
• Welded End Caps
• Limited 5 Year Warranty