International 3200 Cooling and Climate Controls
Top International 3200 Cooling and Climate Controls Categories
We carry over 31 Cooling and Climate Controls in inventory for the International 3200. If you’re looking for aftermarket Cooling and Climate Controls for your International 3200, check out all these categories:
Essential International 3200 Cooling and Climate Controls
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185°F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
Gates – Heavy-Duty Engine Water Pump (Part No.42318HD)
from
$289.99
Product Features:
See More
- Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
- 100 percent fully tested unitized bearings and seals
- Computerized machined surfaces for proper fit and sealing
- Gates heavy-duty water pumps are represented as a part number with an HD suffix
- Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
- New pumps manufactured to ISO/TS 16949 standards
Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.59-8560)
from
$188.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.
Product Features:
See More
Product Features:
- 100% Factory tested for leakage and dimensional precision
- Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
- Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
- Assembled with new, high-quality unitized shaft seals to prevent premature leakage
- Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10240)
from
$5.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10239)
from
$8.29
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Dorman – HD Solutions – Heavy Duty Pressurized Coolant Reservoir (Part No.603-5104)
from
$316.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir matches the fit and function of the original part
- Ideal solution – engineered for a seamless installation
- Durable construction – manufactured from quality materials to withstand underhood heat and vibration
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Dorman – HD Solutions – Heavy Duty Pressurized Coolant Reservoir (Part No.603-5110)
from
$372.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir matches the fit and function of the original part
- Ideal solution – engineered for a seamless installation
- Durable construction – manufactured from quality materials to withstand underhood heat and vibration
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Imperial – Electric Fan – 10" Diameter (Part No.226110)
from
$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38886)
from
$52.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38729)
from
$36.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- Precision machined ports
Carquest Premium – Integrated Thermostat Housing: With Seal, 192 Degrees (Part No.14899)
from
$30.49
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – Thermostat Assembly: Includes Housing, 192 Degrees (Part No.902-1111)
from
$49.49
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Dorman – HD Solutions – Blower Motor Speed Resistor (Part No.973-5089)
from
$71.99
Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance – fixes a fan that’s only operating on one speed or not working at all
- Thoroughly tested – examined and validated to perform safely and effectively
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Dorman – HD Solutions – Blower Motor Resistor Kit With Harness (Part No.973-5088)
from
$82.99
This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
- Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs
- Restores functionality – made to perform like original equipment to restore full HVAC operation
- Trustworthy quality – backed by team of engineers and quality specialists in the USA
Dorman – Engine Heater Hose Assembly (Part No.626-230)
from
$41.99
This engine water pump inlet tube is designed to match the fit and function of the original tube on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this engine water pump inlet tube is designed to match the fit and function of the original tube on specified applications
- Restores functionality – reliable replacement for an original part that has failed due to corrosion from heat and water cycling
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – HVAC Blower Fan Switch (Part No.ACA1262)
from
$9.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Standard Thermostat:: With Thermostat Insert and Seal, 192, 203 Degrees (Part No.49200)
from
$45.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Integrated Housing HD Thermostat: 190 Degrees (Part No.14889)
from
$92.99
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – HD Solutions – Coolant Level Sensor (Part No.904-7550)
from
$51.99
This engine coolant level sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant level sensor is designed to match the fit and function of the original sensor on specified vehicles
- Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
- Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Reverse Rotation Blower Motor Wheel (Part No.35207)
from
$54.99
Product Features:
See More
- Durable Plastic Material
- Meets all requirements of international standard ISO 140
- Suitable for a wide variety of applications
- Set screw installation
Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35448)
from
$15.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Durable Plastic Material
- Meets all requirements of international standard ISO 140
- Suitable for a wide variety of applications
- Retainer clip installation
International 3200 Cooling and Climate Controls Categories
Helping You Find the Right Cooling and Climate Controls for Your International 3200
You love your 3200. So we’ve made it easier than ever to help you find International 3200 Cooling and Climate Controls in our online catalog. Our inventory holds 31 aftermarket and OEM Cooling and Climate Controls for your International 3200, ranging from $5.99 to $372.99.
We offer parts from 5 brands trusted to make quality Cooling and Climate Controls for your International 3200. Before you buy, take some time to read through customer reviews. We currently have 2,583 reviews of International 3200 Cooling and Climate Controls from previous customers. Some of the top rated parts include Engine Coolant Reservoir Cap with 4.9 stars and Standard Rotation Blower Motor Wheel with 1.0 stars.
Find your 3200 Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your International 3200 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Cooling and Climate Controls Brands for Your International 3200
Our inventory holds Cooling and Climate Controls for your International 3200 from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Carquest Premium, and Dorman, all of which can keep that International happy.
We have Driveworks Water Pumps parts available for your International 3200 in categories like Engine Cooling Parts. Some of the top-rated Driveworks Water Pumps parts in these categories are:
Top-Rated Imperial Cooling and Climate Controls
Leading Imperial Cooling and Climate Controls
We carry Imperial brand parts for your International 3200 across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Imperial parts include:
FAQs for International 3200 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the International 3200?
Out of 31 Cooling and Climate Controls for the International 3200, the most popular in our inventory are:
from
$30.49
(9)
Integrated Thermostat Housing: With Seal, 192 Degrees
Thermostat and Water Outlet Assemblies
What are the top-rated International 3200 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your International 3200 based on customer reviews/ratings are:
from
$15.99
(4)
Standard Rotation Blower Motor Wheel
“I bought this since it said it would work for a 74 cuda which it didnt. It was too big compared to the old. So i just used my old one.”
from
$62.99
(2)
Thermostatic Fan Control – Adjustable
“Need to find brass bushings to fit sensor to intake.Very easy to install!”
