International 1100A Cooling and Climate Controls
Top International 1100A Cooling and Climate Controls Categories
We carry over 31 Cooling and Climate Controls in inventory for the International 1100A. If you’re looking for aftermarket Cooling and Climate Controls for your International 1100A, check out all these categories:
Essential International 1100A Cooling and Climate Controls
Flex A Lite – 400 Series Nylon Flex Fan (Part No.418)
from
$34.99
400 Series Nylon Flex Fan
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Electric Fan – 10" Diameter (Part No.226110)
from
$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1097)
from
$16.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Gates – Heavy-Duty Engine Water Pump (Part No.42111HD)
from
$109.99
Product Features:
See More
- Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
- 100 percent fully tested unitized bearings and seals
- Computerized machined surfaces for proper fit and sealing
- Gates heavy-duty water pumps are represented as a part number with an HD suffix
- Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
- New pumps manufactured to ISO/TS 16949 standards
Driveworks Water Pumps – Water Pump (Part No.59-8512)
from
$84.99
Using advanced re-engineering materials and processes, our remanufactured water pumps match O.E. fit and performance. Each unit is supplied with new, unitized seals and the proper O.E.-specified bearing design to meet the specific radial and axial load re
Product Features:
See More
Product Features:
- 100% leak testing and hub-pull testing ensures reliable performance.
- O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
- The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
- Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).
Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13476)
from
$10.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13479)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Universal Fan Clutch – 7" Thermal Regular Duty (Part No.215049)
from
$49.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Carquest Premium – Universal Fan Clutch – Non-Thermal (Part No.211049)
from
$47.49
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Imperial – 16" Electric Fan (Part No.226216)
from
$115.99
Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Thin-line electric fan
- 16″ diameter
- 1,400 CFM
- Use as a pusher or puller fan
Flex A Lite – Black Magic Electric Fan (Part No.160)
from
$347.99
Black Magic Electric Fan
Felpro – Engine Water Pump Gasket (Part No.12880)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Felpro – Engine Coolant Outlet Gasket (Part No.12485)
from
$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14556)
from
$22.99
Belt-Driven Fan Spacer Kit
Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14548)
from
$17.99
Belt-Driven Fan Spacer Kit
Carquest Premium – Radiator Cap: 7 PSI (Part No.10228)
from
$6.29
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
International 1100A Cooling and Climate Controls Categories
Helping You Find the Right Cooling and Climate Controls for Your International 1100A
You love your 1100A. So we’ve made it easier than ever to help you find International 1100A Cooling and Climate Controls in our online catalog. Our inventory holds 31 aftermarket and OEM Cooling and Climate Controls for your International 1100A, ranging from $1.49 to $367.99.
We offer parts from 7 brands trusted to make quality Cooling and Climate Controls for your International 1100A. Before you buy, take some time to read through customer reviews. We currently have 1,864 reviews of International 1100A Cooling and Climate Controls from previous customers. Some of the top rated parts include Electric Fan – 14" Diameter with 3.5 stars and Universal Fan Clutch – 7" Thermal Regular Duty with 4.9 stars.
Find your 1100A Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your International 1100A part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Cooling and Climate Controls Brands for Your International 1100A
Our inventory holds Cooling and Climate Controls for your International 1100A from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Carquest Premium, and Factory Air, all of which can keep that International happy.
We have Flex A Lite parts available for your International 1100A in categories like Engine Cooling Parts. Some of the top-rated Flex A Lite parts in these categories are:
Top-Rated Imperial Cooling and Climate Controls
Leading Imperial Cooling and Climate Controls
We carry Imperial brand parts for your International 1100A across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Imperial parts include:
FAQs for International 1100A Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the International 1100A?
Out of 31 Cooling and Climate Controls for the International 1100A, the most popular in our inventory are:
What are the top-rated International 1100A Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your International 1100A based on customer reviews/ratings are:
from
$49.99
(10)
Universal Fan Clutch – 7" Thermal Regular Duty
“Excellent fit, exact replacement, works like stock.”
from
$6.29
(8)
Radiator Cap: 7 PSI
“This is a lower PSI cap for a V10 – fits just like the factory 16psi cap.”
