IC Corporation Fuel and Emissions Systems

This fuel injector control module is designed to match the fit and function of the original module on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
• Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
• No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
• Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future

This replacement diesel fuel heating element matches the function and performance of the original equipment part. Made of quality materials, it has undergone extensive testing to ensure durability.

Product Features:

• Upgraded replacement – this diesel fuel bowl heating elements features more reliable technology
• Ensures performance – updated ceramic design maintains a lasting electric connection
• Direct fit – reverse engineered from original equipment for seamless installation
• Quality engineering – designed and tested in the United States

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA
• CAUTION: Furnished D-Ring must be installed on post for seal.

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

• Allows you to replace only faulty power supply instead of entire fuel injection control module assembly
• 100% new, not remanufactured, so there’s no leftover debris that may cause failure
• Re-engineered circuit board layout
• Higher-quality electronics protect critical components from excess heat that can lead to failure

Automotive diesel engines rely on high pressure oil pumps to circulate oil throughout the engine as well as assist in fuel injection and timing functions. CARDONE Remanufactured High Pressure Oil Pumps are direct O.E. replacement units that have been completely disassembled, cleaned and inspected before renewal. All standard wear items are replaced with brand new components and functional testing is performed on every unit to ensure perfect fit and reliable performance.

Product Features:

• Starts as a genuine O.E. core.
• Completely disassembled, cleaned and inspected to determine condition of core
• All standard wear items are replaced with new components
• Functional testing is performed on every unit to assure product matches O.E. performance
• Supplied with mounting gasket and injection pressure regulator seal kit, where applicable.

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

• Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
• Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Tight seals are essential to proper EGR cooler operation. This EGR cooler gasket kit contains all the gaskets and seals required to ensure a solid repair. Made of quality materials, this kit is a direct replacement for original equipment parts.

Product Features:

• Direct replacement – this exhaust gas recirculation (EGR) gasket kit matches the original equipment gaskets for this vehicle application
• Durable construction – the components in this EGR cooler gasket kit are made of quality materials for a secure fit and excellent durability
• Convenient solution – the gaskets in this kit should be replaced whenever repairs are performed on the EGR cooler, intake manifold or oil cooler
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:

• Improved reliability – this replacement EGR cooler features a spiral tube design, reducing clogging experienced with the original manufacturer’s design
• Superior durability – precision-engineered using welded stainless steel for long service life
• Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
• Hardware included – all necessary O-rings, gaskets, and application-specific hardware included

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

• 100% O-ring replacement
• All Delphi injectors are tested utilizing OE methodologies
• Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
• No internal seal rings equals minimized leakage
• Recessed fuel exit minimizing possible plugging
• Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
• Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

• All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
• Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
• All components are renewed or replaced as necessary to ensure high quality and durability
• When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
• Guaranteed fit and function
• Meets or exceeds O.E.M. performance

The Premium CarQuest® Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:

• The Premium CarQuest® Vehicle Solutions line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
• Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
• Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
• Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
• Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
• All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
• All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:

• The Premium CarQuest® Vehicle Solutions line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
• Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
• Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
• Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
• Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
• All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
• All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA
• Includes Standpipe. Sensor Port Thread: M14 x 2.0
• CAUTION: Furnished O-Ring must be installed on post for seal. For use with Deutz square sensor.

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

This EGR cooler hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this EGR cooler hose is designed to match the fit and function of the original hose on specified vehicles
• Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
• Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

• All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
• Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
• All components are renewed or replaced as necessary to ensure high quality and durability
• When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
• Guaranteed fit and function
• Meets or exceeds O.E.M. performance

Carquest spin-on fuel filters with open ends for bowls keep fuel clean and engines running at maximum efficiency. These filters feature a port designed to be used with the OE bowl.

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Includes Port Thread: 3-12

This fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
• Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
• Application specific – designed for a wide range of vehicle years, makes and models
• This part has undergone vehicle try-on testing for conformance to product standards and quality

This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:

• Direct replacement – this EGR cooler is made to match the fit and function of the original part on specific applications
• Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
• Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This DPF differential pressure sensor is designed to match the fit and function of the original part on specified makes, years and models, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this replacement exhaust gas differential pressure sensor, also known as a diesel particulate filter (DPF) sensor, is designed to match the fit and function of the original sensor on specified makes, years and models
• Restores functionality – reliable replacement for an original sensor that has broken, burned out, corroded or otherwise stopped working
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This diesel particulate filter (DPF) is designed to match the fit and function of the original filter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this diesel particulate filter (DPF) is designed to match the fit and function of the original filter on specified vehicles
• Restores functionality – reliable replacement for an original part that has failed due to clogging
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This DPF differential pressure sensor is designed to match the fit and function of the original part on specified makes, years and models, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this replacement exhaust gas differential pressure sensor, also known as a diesel particulate filter (DPF) sensor, is designed to match the fit and function of the original sensor on specified makes, years and models
• Restores functionality – reliable replacement for an original sensor that has broken, burned out, corroded or otherwise stopped working
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Diesel engine idling rough, misfiring or stalling? This replacement injector control pressure sensor matches the fit and function of the original equipment sensor to ensure the control module receives accurate information for smooth running.

Product Features:

• Direct replacement – this diesel injector control pressure (IPC) sensor matches the fit, function and performance of the original equipment sensor
• Reliable construction – this IPC sensor is built from quality components to deliver an accurate signal to the ECM
• Easy installation – this sensor features a factory-style electrical connector
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life