Hyundai Accent CV Quick Boot Kit

CV Quick Boot Kit for a Hyundai Accent

Use the fitment form at the top of the page to select your exact year and engine type for your Hyundai Accent.

• 

  Dorman - OE Solutions - C.V. Joint Solvent Welded Split Boot Kit Outer (Part No. 614-531)

  Description

  Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
  
  Product Features:

  • Save labor with easy installation methods
  • Comes with grease and bands
  • Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
  • The Speedi and Quick Boot are installed without special tools

  2.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  2.5

  2.5

  • 4

    4

    2017-07-05

    4

    4

    CV split boot kit works well

    CV split boot kit works well

    Submitted 2017-07-05

    By Michael

    From undisclosed

    This is the 2nd Kit I've installed... first on the pass side ,, now for the drivers, All goes well but the metal bands are hard to get tight.. So I added some RTV sealer to make a good seal. Messy job but saves a bundle.

    Bottom Line

    This is the 2nd Kit I've installed... first on the pass side ,, now for the drivers, All goes well but the metal bands are hard to get tight.. So I added some RTV sealer to make a good seal. Messy job but saves a bundle.

    By Michael from undisclosed

    BOTTOM LINE

  • 2

    2

    2016-07-06

    2

    2

    Well, use as a last resort.

    Well, use as a last resort.

    Submitted 2016-07-06

    By Jonathanjays

    From Moncks Corner, SC

    Bought this as a last resort and use it as a last resort. The directions are clear, but the part is poor quality. I welded the seems with the supplied glue, but when placed in the joints it had trouble staying together. It came with a shaft plug that was in two pieces(also poor quality), I had to modify this with plumbing tape to get it to stay in the boot. I ended up using high performance glue on the boot as an extra precaution.

    Bottom Line not recommended

    Bought this as a last resort and use it as a last resort. The directions are clear, but the part is poor quality. I welded the seems with the supplied glue, but when placed in the joints it had trouble staying together. It came with a shaft plug that was in two pieces(also poor quality), I had to modify this with plumbing tape to get it to stay in the boot. I ended up using high performance glue on the boot as an extra precaution.

    By Jonathanjays from Moncks Corner, SC

    BOTTOM LINE not recommended

  • 4

    4

    2015-03-14

    4

    4

    ½ yr and still good, so I'd do it again.

    ½ yr and still good, so I'd do it again.

    Submitted 2015-03-14

    By Pete

    From Elkhart, IN

    My notes in addition to the instructions: 0) Get brake-parts cleaner at the store while purchasing the boot (I found this in the instructions after returning home, so had to go back to the store). 1) Next time, might be able to assemble the split boot on the shaft at a distance from the CV joint, even before removing the old boot. Then if anything goes wrong with assembly you're less committed. 2) Only one tube of sealant for the whole job: use sparingly (more than enough grease, though). 3) The small end of the boot is sealed by a "wedge" adaptor. This didn't fit perfectly, but it forms a somewhat redundant seal, and perhaps the far end of the boot is less critical anyhow (if grease makes it that far from the joint in order to leak out there, then that grease wasn't helping anyhow) 4) When installing the metal clamp/bonds, orient it so the band comes toward you: it's easier to pull with pliars toward yourself/away from the chassis, than away from yourself/toward the chassis.

    Bottom Line recommended

    My notes in addition to the instructions: 0) Get brake-parts cleaner at the store while purchasing the boot (I found this in the instructions after returning home, so had to go back to the store). 1) Next time, might be able to assemble the split boot on the shaft at a distance from the CV joint, even before removing the old boot. Then if anything goes wrong with assembly you're less committed. 2) Only one tube of sealant for the whole job: use sparingly (more than enough grease, though). 3) The small end of the boot is sealed by a "wedge" adaptor. This didn't fit perfectly, but it forms a somewhat redundant seal, and perhaps the far end of the boot is less critical anyhow (if grease makes it that far from the joint in order to leak out there, then that grease wasn't helping anyhow) 4) When installing the metal clamp/bonds, orient it so the band comes toward you: it's easier to pull with pliars toward yourself/away from the chassis, than away from yourself/toward the chassis.

    By Pete from Elkhart, IN

    BOTTOM LINE recommended

  from $16.99

  View Product
• 

  Beck/Arnley - Cu Boot Kit (Part No. 103-2565)

  Description

  Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
  
  Product Features:

  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle

  from $23.29

  View Product
• 

  EMPI/Empire - CV Joint Boot Kit (Part No. K6010455566EMP)

  Description

  With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
  
  Product Features:

  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure

  from $18.78

  View Product
• 

  EMPI - RE CV Joint Boot Kit (Part No. K6010181548EMP)

  Description

  With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
  
  Product Features:

  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure

  from $17.30

  View Product
• 

  MOOG Driveline Products - CV Joint Boot Kit (Part No. 2499)

  Description

  Over 70 years of aftermarket engineering and product expertise has made MOOG an industry leader in driveline quality and customer satisfaction.
  
  Product Features:

  • Replaces the OEM fitment
  • Straps designed to prevent contaminants from entering boot cavity
  • Straps have superior strength
  • Boot material designed for strength
  • Convoluted boots allow for increase articulation
  • Ease of installation

  from $16.99

  View Product
• 

  Beck/Arnley - Cu Joint Boot Kit (Part No. 103-2624)

  Description

  Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
  
  Product Features:

  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle

  from $14.99

  View Product