from

$649.99

Distributors

from

$43.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Magnet size and strength optimized for precise signal output.
Precision-wound coated copper windings increase signal output and increase longevity.
Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$176.99

Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:

Easy Installation
Improved Fuel Economy
Reduced Maintenance
Accurate Timing
Improved Performance
Provides A Simple Conversion
No Moving Parts To Wear Out

from

$75.99

This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985

Product Features:

Fits Most Stock And Modified Distributors
Solid State Electronics
Dwell Control Circuit

from

$25.49

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$64.99

Performance upgrade for 7mm OE applications, silicone jacket with fiberglass braid EPDM insulation, tinned copper core, rated at 450 degrees Fahrenheit. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end.

Product Features:

Silicone Spark Plug Boots
90 Degree Spark Plug Boot Angle
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$549.99

This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized ( . 006 In.) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

Product Features:

Includes built-in Rev Limiter

from

$482.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

7 in. Diameter
Absolutely the most accurate way to trigger the ignition.
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.

from

$71.99

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$299.99

Our Chevrolet front drive distributors brought the need for a distributor plug. Both are billet aluminum and feature a slip collar to ensure correct installation depth.

Product Features:

Use On Engines w/Wet Sump Oil System And Front Drive Dist.
Supplied w/Bronze Gear
Must Be Used w/An MSD Crank Trigger
Adj. slip collar mounting flange for engines w/modified deck hts.
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear
QPQ coated polished steel shaft; guided by sealed ball bearings
Oversized Polished Steel Shaft w/QPQ Coating

from

$11.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$32.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$72.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$16.99

An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$59.99

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$14.99

Chrome Finish

Product Features:

Edelbrock part No. 4802 hold-down distributor clamp is for 4.3L V6, small-block V8 and big-block V8 Chevys. It is constructed of die-cast zinc with a chrome finish. Kit includes stud, nut and a washer.
Includes stud, nut, & washer

from

$54.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$18.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$19.99

This Radio Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The radio capacitor may also be called a condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$78.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$3.29

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Fel-Pro Oil Pan SnapUps 8mm bolts
Designed to hold up the pan and gasket, for one person installation
Engine$aver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$24.29

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$4.99

The Ignition Coil Ground Strap is designed to ground the ignition coil laminations and prevent lost power from the ignition coil.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Attaching hardware provided (where applicable)

from

$21.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$16.99

ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features: