GMC C25/C2500 Suburban Performance Shifters

“An icon for a reason: the MegaShifter’s positive ratcheting action and reverse lockout deliver confident shifts and NHRA/IHRA compliance, wrapped in classic T-handle and accordion-boot style. Comes with a trim-to-fit console, 5-ft cable, brackets, levers, chrome top plate with lighted indicator, and everything needed for most Chrysler, Ford, and GM 3-/4-speed autos (additional kits may be required). Overall: 13″” L x 6.6″” W x 12.6″” H.”

“Sometimes the best design is the simplest one, and the Z-Gate shifter is a great example of just that. With the fewest moving parts of any automatic shifter in the B&M line, the Z-Gate shifter and its patented internal “”Z”” shaped gate system eliminates the possibility of over-shifting and missing gears. Fewer moving parts means less possibility of failure and with many of the same great features of the higher priced shifters, you just can’t go wrong! The Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most popular 3-speed transmission applications. Notes: Ford AOD transmissions will require optional kit# 40496″

1969-1972 Chevrolet Chevelle,Malibu with/without console

The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add the billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and finish it off with a brushed aluminum cover with quick release pins, and you end up with one good looking bullet-proof race shifter. Optional Forward and Reverse shift pattern gate plates are available for most popular 2, 3 and 4-speed transmissions. This model Pro Stick comes out of the box ready for action for most popular 3-speed transmissions, includes a 5-foot Super Duty shift cable, brackets, levers, hardware and detailed instructions for an easy installation. Be sure to check out the optional shift knobs including the one with a 12-volt momentary switch along with all the other accessories we offer located in the Shifter Accessories section. Notes: AOD requires installation kit #40496, AODE & 4R70W requires installation kit #40504, E40D & 4R100 requires installation kit #40505, 2004R & 700R4 require gate plate #80712, 4L60E – 4L85E equipped with PRNDL switch requires cable bracket kit #70499 and gate plate #80712. Overall Dimensions – 8.25L x 2.92W x 9.25H

“A taller (14.85″”) MegaShifter tailored for trucks and bench seats, combining positive ratcheting shifts that prevent over-shifting with an NHRA/IHRA-compliant reverse lockout. The package includes a trim-to-fit console, T-handle with accordion boot, 5-ft cable, brackets, levers, and a lighted gear indicator-plus compatibility across popular Chrysler, Ford, and GM 3-/4-speed autos (install kits may be required; see applications). Overall: 14.9″” L x 6.4″” W x 14.8″” H.”

1966 Oldsmobile F85, 442 without console

A clean, manual-4-speed look with simple, durable detent function that uses your transmission’s factory gates. Ideal for column-to-floor conversions, it includes a boot, neutral safety switch, 5-ft performance cable, brackets, levers, and hardware for a straightforward install. While not a race ratchet, it’s tough, trouble-free, and backed by a Lifetime Limited Warranty.

With its cutting-edge design combined with race-proven mechanics, the Street Bandit offers an unbeatable combination of performance, functionality, and looks! This high-performance street-oriented shifter comes set up for 3-speed transmissions and is packed with all kinds of features. Starting out as a seven-pound block of 6061-T6 aluminum, the Pro Bandit shifter features CNC machined construction, an ergonomically shaped stainless knob with a polished & matte finish, trigger-activated reverse gate release function (does not have a reverse lockout to meet NHRA/IHRA safety rules.) The Street Bandit is compatible with forward or reverse pattern valve bodies and is fully capable of controlling 2, 3 and 4-speed automatic transmissions by simply replacing the hardened steel gate plate, and applicable brackets and levers. Other features include a 4-foot Super Duty shift cable, rear cable exit, chrome shifter bracket, back up light switch, neutral safety switch, cable brackets, and levers for most popular brands of 3-speed auto transmissions. Comes with detailed instructions for an easy installation. Optional gate plates, cable brackets, lever kits, and side grip plates both with and without 12V momentary buttons are available separately. Overall Dimensions – 10L x 1.33W x 9.93H

1960-1963 Chevrolet Full size cars with/without a console

The Pro Ratchet shifter is one of our most popular and easiest to operate race shifters. Features include positive ratcheting design that self-centers the handle after each shift giving you maximum clearance behind the shifter, and will not allow you to miss a shift by over-shifting a gear. This versatile shifter will operate both forward and reverse shift patterns. The reverse lockout feature only requires one hand to operate and meets both NHRA and IHRA safety regulations for racing. Other features include a neutral safety switch, backup light switch, along with a brushed aluminum cover. This shifter includes a classic white shift knob with the B&M logo, a 5-foot long Super Duty shifter cable, brushed aluminum cover, gear indicator, cable bracket, and Pro lever transmission shift arm for use with 1962-1973 GM Powerglide 2-speed transmissions. Comes with all necessary hardware and detailed instructions for an easy at home installation. Note: Overall dimensions – 10.75L x 2.9W x 9.25H

B&M Shift Cable Bracket for GM Powerglide transmissions with a B&M Street Bandit and Pro Bandit shifters (also works with Composite X shifter) with a rear exit shift cable.

The Hurst Quarter Stick shifter provides positive gear change control for both street and race applications. Its compact size fits easily in race cars with limited space and is very lightweight at only 2.5 pounds. Features include black oxide coated steel construction, 1018 hardened steel gate plate, forged aluminum shift stick with 7/16-20 tpi and a classic white Hurst shift knob. Other features include factory installed neutral safety switch, chrome-plated trigger, and a spring-loaded reverse Loc/Out mechanism that complies with NHRA/IHRA safety rules. Includes all necessary hardware, a 5-foot long shifter cable, and complete installation instructions. Note: Optional aluminum mounting bracket, backup light switch and lightweight aluminum or plastic shifter covers available separately. Does not fit early GM cast iron PG transmission.

“Track-favorite simplicity with bulletproof execution: the Pro Ratchet self-centers after each shift, won’t over-shift, and integrates a one-hand reverse lockout meeting NHRA/IHRA rules. It adds a brushed cover, classic white knob, neutral safety and backup-light switches, gear indicator, 5-ft Super-Duty cable, brackets, levers, and hardware for most Chrysler, Ford, and GM 3-/4-speeds (install kits may be required). Overall: 10.75″” L x 2.9″” W x 9.25″” H.”

The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add a billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and you end up with one good looking bullet-proof race shifter. This model Pro Stick comes out of the box ready for action for 1962-1973 GM Powerglide transmissions with forward shift pattern, includes a 5-foot Super Duty shift cable, cable bracket, PG Pro Lever, hardware and detailed instructions for an easy installation. Be sure to check out the optional brushed aluminum cover, classic white shift knob with a 12-volt momentary switch, or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Overall Dimensions – 8.25L x 2.92W x 9.25H Note: This model does not include an aluminum shift cover.