Ford Victoria Engine Parts

Essential Ford Victoria Engine Parts

Sealed Power – Engine Rocker Arm Nut (Part No.MR-1823)

Engine Rocker Arm Nut

from

$0.72
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 289-302 V8 (Part No.2221)

Rollin' Thunder Camshaft for Small-Block Ford 289-302 V8

from

$517.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.

Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
  • Use Only Stock Ratio Rocker Arms
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 13264 T)

Engine Valve Cover Gasket Set

from

$47.99
Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE – Features molded rubber over a rigid carrier which resists high heat
  • SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Performer-Plus Camshaft Kit for Big-Block Ford FE 390-428 V8 (Part No.7106)

Performer-Plus Camshaft Kit for Big-Block Ford FE 390-428 V8

from

$455.99


Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More

Dorman – Steel Cup Expansion Plug 3/4 In., Height 0.250 (sold by each) (Part No.555-012)

Steel Cup Expansion Plug 3/4 In., Height 0.250 (sold by each)

from

$1.79
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Mr. Gasket – Oil Dipstick & Tube (Part No.6920)

Oil Dipstick & Tube

from

$22.99
Direct replacement over stock. Installs with simple hand tools.

Product Features:
  • Chrome Plated For Great Looks
  • Direct Replacement Over Stock
See More

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-43)

Stock Replacement Type Oil Pump Intermediate Shaft

from

$28.49
Made In USA. A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking and even twisting damage of the old shaft even when the part appears to be in good condition. Complete every Melling oil pump replacement with a new Melling oil pump shaft.

Product Features:
  • Manufactured from high quality materials for consistent durable wear
  • Precision engineered for optimum fit and function
  • Designed for long-life and worry-free performance
  • Meets or exceeds original equipment specifications
See More

National – Multi-Purpose Seal (Part No.2942)

Multi-Purpose Seal

from

$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
  • Resistance to EP lubricants
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Cloyes Performance – High Performance Timing Set (Part No.9-3635X9Z)

High Performance Timing Set

from

$229.99
Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter “Z” Chain for Reduced Friction. “Z” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “Z” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:
  • The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
  • Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
  • Refer to our online catalog for detailed application-specific information
  • Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
See More

Felpro – Engine Conversion Gasket Set (Part No.CS 8548-4)

Engine Conversion Gasket Set

from

$32.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:
  • Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
  • Includes all the parts necessary to complete the repair unless otherwise noted
  • Includes all the parts necessary to complete the repair unless otherwise noted
See More

Driveworks – Main Bearing Repair Sleeve (Part No.S-99181)

Main Bearing Repair Sleeve

from

$43.49
Product Features:
  • Brand may vary by location
See More

Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)

Econo-Kool® Engine Oil Cooler

from

$122.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Imperial Econo-Kool« engine oil cooler kit
  • Imperial Econo-Kool® engine oil cooler kit
  • Lightweight construction with high-efficiency turbulators
  • Light-duty applications
  • All except Chevrolet V8 applications
  • Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.
See More

Mr. Gasket – Woodruff Key (Part No.988G)

Woodruff Key

from

$34.99
The offset cam and crankshaft key helps increase torque and horsepower.

Product Features:
  • Increases Low-End Torque
  • Increases Mid-Range Horsepower
  • Reduces Low-End Torque
  • Increases Top-End Horsepower
See More

Edelbrock – Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft (Part No.5027)

Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft

from

$1838.99
The Edelbrock #5027 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex

Product Features:
  • Complete Pair For Mechanical and Hydraulic Flat Tappet
  • 60cc Combustion Chamber Volume
  • 205cc Intake/62cc Exhaust Runner Volume
  • 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
  • 0.625 in. Deck Thickness
See More

ARP Auto Racing – 1.895"Oal Stud, 1"D Adjuster Thread, 3/8"-24, 7/16"-14 Thread, 0.71"D Screw-In (Part No.134-7124)

1.895"Oal Stud, 1"D Adjuster Thread, 3/8"-24, 7/16"-14 Thread, 0.71"D Screw-In

from

$13.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 Psi
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Sold As A Pair
  • 1″ Adjuster Thread Length
  • 3/8″-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application with Roller Rockers
See More

Melling – Stock Replacement OE Type High Pressure Oil Pump (Part No.M-57HP)

Stock Replacement OE Type High Pressure Oil Pump

from

$120.99
Made in USA. Melling high pressure oil pumps can aid in increasing the amount of oil pressure in engines with low oil pressure. Melling oil pumps provide dependable performance every time in every application. Every Melling high pressure oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling high pressure oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:
  • Manufactured from high quality materials for consistent durable wear
  • Precision engineered for optimum fit and function
  • Designed for long-life and worry-free performance
  • High pressure oil pump supplies additional oil pressure to engines when necessary for high performance applications or low oil pressure issues
See More

Competition Cams – Set of 16 – 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess (Part No.611-16)

Set of 16 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

from

$479.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:
  • For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
  • Super Locks are recommended in all race applications
See More

Felpro – Engine Valve Cover Grommet Set (Part No.10740)

Engine Valve Cover Grommet Set

from

$4.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – PermaTorque Engine Gasket Set (Part No.FS 7999 PT-3)

PermaTorque Engine Gasket Set

from

$114.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.7999 PT)

PermaTorque Engine Cylinder Head Gasket

from

$21.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:
  • Built to exceed all original equipment specifications
  • Provides the robust seal needed to contain peak combustion pressures and temperatures
  • Unsurpassed quality you can trust
See More

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$44.99
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Thick parallel ground washer provides more accurate, uniform torque
  • Hex Prevents Socket Slippage
  • Accurate And Uniform Torque
  • Black Plated Finish
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1005M)

Engine Camshaft Bearing Set

from

$49.99
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 10701 C-1)

Engine Oil Pan Gasket Set - Blue Stripe cork-rubber

from

$25.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
  • SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Engine Oil Priming Tool

from

$355.99
Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.
See More

ARP Auto Racing – For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile (Part No.154-3601)

For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile

from

$82.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:
  • High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
  • Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
  • Rated At 180,000 Psi Tensile Strength
  • High Performance Head Bolts Are Stronger
See More

Helping You Find the Right Engine Parts for Your Ford Victoria

You love your Victoria. So we’ve made it easier than ever to help you find Ford Victoria Engine Parts in our online catalog. Our inventory holds 393 aftermarket and OEM Engine Parts for your Ford Victoria, ranging from $0.30 to $1,838.99.

We offer parts from 18 brands trusted to make quality Engine Parts for your Ford Victoria. Before you buy, take some time to read through customer reviews. We currently have 3,403 reviews of Ford Victoria Engine Parts from previous customers. Some of the top rated parts include Stock Replacement OE Type Oil Pump with 4.8 stars and Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included with 5.0 stars.

Find your Victoria Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Victoria part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Engine Parts Brands for Your Ford Victoria

Our inventory holds Engine Parts for your Ford Victoria from 18 trusted brands. You’ll find OEM and aftermarket parts from brands like FELPRO, Sealed Power, and Dorman, all of which can keep that Ford happy.

FAQs for Ford Victoria Engine Parts

What are the most purchased Engine Parts for the Ford Victoria?

Out of 393 Engine Parts for the Ford Victoria, the most popular in our inventory are:
Engine Valve Lifter
from $12.99
(11)
Engine Valve Lifter
Engine Valve Lifters
Engine Valve Lifter
from $11.99
(1)
Engine Valve Lifter
Engine Valve Lifters

What are the top-rated Ford Victoria Engine Parts?

Top-rated Engine Parts for your Ford Victoria based on customer reviews/ratings are:
Stock Replacement OE Type Oil Pump
from $46.99
(8)
Stock Replacement OE Type Oil Pump
“Product was a perfect fit top notch at a great price”
Engine Oil Pan Gasket Set - PermaDryPlus rigid carrier, Oil Pan SnapUps Included
from $52.99
(6)
Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included
“Good product, reliable company”
Engine Rocker Arm Kit
from $8.99
(6)
Engine Rocker Arm Kit
“Nice quality named brand rockers for a fantastic price. Looked like OEM style and they were made in the USA!”