Ford Transit-350 Engine Parts

Essential Ford Transit-350 Engine Parts

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Stock Replacement Engine Assembly Lubricant

from

$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More

Dorman – Harmonic Balancer Bolt (Part No.926-886)

Harmonic Balancer Bolt

from

$16.99
This engine harmonic balancer bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine harmonic balancer bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spartan – Engine Long Block; Ford 3.7 11-17 Engine (Part No.DFM9)

Engine Long Block; Ford 3.7 11-17 Engine

from

$4779.99
Your remanufactured engine is tested in several specific ways after being assembled: multiple pressure tests, each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressurize the water jacket with 30 lbs. of air pressure. As a result of these tests, you can be sure your unit will not have coolant leaks. SIM test: after pressure testing, our final check of engine performance is a spin test. We turn the engine at 400 RPM with oil pressure lines attached. The test measures compression on each cylinder, oil pressure, oil flow and allows an easy visual check that oil is reaching all critical areas. This test also allows the rear main seal to be checked for leaks.

Product Features:
  • Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
  • Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
See More

DENSO – Camshaft Position Sensor (Part No.196-6006)

Camshaft Position Sensor

from

$67.99
DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:
  • OE technology adapted for the aftermarket
  • Reduces emissions, increased performance
  • Delivers the highest reliability and detection accuracy
See More

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5686)

Engine Timing Chain Tensioner

from

$39.99
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Meet or exceed OEM performance requirements
  • Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
See More

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.3318)

Engine Mount: Front Left, Front Right, 1 Piece

from

$99.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 15-21;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2015-2021
  • Weight approx: 3 Lbs
  • HYDRAULIC
  • PART GROUP: 3318, 3318, 3319
See More

Motorcraft – Original Equipment (O.E.) Gasket (Part No.CG-807)

Original Equipment (O.E.) Gasket

from

$18.99
The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Seals are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.
See More

Mahle – Cylinder Head Gasket (Part No.A80101701383MAH)

Cylinder Head Gasket

from

$598.53
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

Rotomaster – Turbocharger (Part No.K1030130N)

Turbocharger

from

$596.99
Rotomaster 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.

Product Features:
  • 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
  • Unit comes with the required gaskets and mounting hardware for easy installation.
  • Meets or exceeds O.E. performance.
  • Unit comes with a pre-lube syringe to ensure product protection during installation.
  • Manufactured with 100% new components and tested to ensure trouble-free operation.
See More

Felpro – Turbocharger Inlet Gasket (Part No.61776)

Turbocharger Inlet Gasket

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
See More

Carquest Premium – Crankshaft Sensor (Part No.CSC1261)

Crankshaft Sensor

from

$40.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Melling – Stock Replacement Oil Pump: Standard Volume, Standard Pressure, Aluminum, With Gasket (Part No.M390)

Stock Replacement Oil Pump: Standard Volume, Standard Pressure, Aluminum, With Gasket

from

$177.99
Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:
  • Manufactured from high quality materials for consistent durable wear
  • Precision engineered for optimum fit and function
  • Designed for long-life and worry-free performance
  • Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
See More

Felpro – CONVERSION GASKET SET/ LOWER GASKET SET (Part No.CS 26543-1)

CONVERSION GASKET SET/ LOWER GASKET SET

from

$155.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
  • Includes all the parts necessary to complete the repair unless otherwise noted
  • Includes all the parts necessary to complete the repair unless otherwise noted
See More

Mahle – Turbo Mounting Gaske (Part No.B40221333832MAH)

Turbo Mounting Gaske

from

$70.70
Turbo Mounting Gaske

Dorman – Camshaft Phaser (Part No.916-540)

Camshaft Phaser

from

$171.99
The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:
  • Direct replacement – this VVT sprocket fits and performs like the original sprocket
  • Durable construction – made from durable steel and precision machined for reliable performance
  • 100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
  • Quality assured – vehicle-specific application has been validation tested to ensure quality
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50814 R)

Engine Valve Cover Gasket Set

from

$82.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Dorman – Engine Oil Pan: Direct Fit, Aluminum, Rear Sump, 6 Quart (Part No.264-323)

Engine Oil Pan: Direct Fit, Aluminum, Rear Sump, 6 Quart

from

$121.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this engine oil pan is made to match the original pan on specific vehicles.
  • Complete assembly – includes replacement pan and drain plugs to match original components.
  • Durable design – high-strength coating prevents future corrosion
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Victor Reinz – Engine Oil Cooler Gasket (Part No.71-16267-00)

Engine Oil Cooler Gasket

from

$19.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Motorcraft – Motorcraft Fuel Pump Tank Seal (Part No.E3004423442MTR)

Motorcraft Fuel Pump Tank Seal

from

$35.87
The Motorcraft seals and gaskets, combines quality materials and design excellence that promote product integrity and customer satisfaction

Product Features:
  • Original Equipment Quality
  • Stands up to grease, oil, dirt and high temperatures
See More

Felpro – TIMING COVER GASKET SET (Part No.TCS 46182)

TIMING COVER GASKET SET

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mahle – Cyl. Head Bolt Set (Part No.A30311335709MAH)

Cyl. Head Bolt Set

from

$102.42
Cyl. Head Bolt Set

Sealed Power – Con Rod Bearing Set (Part No.6-5080A 25MM)

Con Rod Bearing Set

from

$34.49
Con Rod Bearing Set

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26544 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$28.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Dorman – Harmonic Balancer Assembly (Part No.594-955)

Harmonic Balancer Assembly

from

$137.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:
  • Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
  • Durable construction – stringent specifications and careful construction help ensure longevity
  • Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Helping You Find the Right Engine Parts for Your Ford Transit-350

You love your Transit-350. So we’ve made it easier than ever to help you find Ford Transit-350 Engine Parts in our online catalog. Our inventory holds 150 aftermarket and OEM Engine Parts for your Ford Transit-350, ranging from $4.99 to $5,233.99.

We offer parts from 24 brands trusted to make quality Engine Parts for your Ford Transit-350. Before you buy, take some time to read through customer reviews. We currently have 1,578 reviews of Ford Transit-350 Engine Parts from previous customers. Some of the top rated parts include Shaft Repair Sleeve with 5.0 stars.

Find your Transit-350 Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Transit-350 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Engine Parts Brands for Your Ford Transit-350

Our inventory holds Engine Parts for your Ford Transit-350 from 24 trusted brands. You’ll find OEM and aftermarket parts from brands like FELPRO, Carquest Premium, and Dorman, all of which can keep that Ford happy.
We have Felpro parts available for your Ford Transit-350 in categories like Engine Internals. Some of the top-rated Felpro parts in these categories are:
Engine Crankshaft Seal Kit
from $10.79
(6)
Engine Crankshaft Seal Kit
Crankshaft Seals

FAQs for Ford Transit-350 Engine Parts

What are the most purchased Engine Parts for the Ford Transit-350?

Out of 150 Engine Parts for the Ford Transit-350, the most popular in our inventory are:
Engine Valve Cover Gasket Set
from $82.99
This product is not rated
Engine Valve Cover Gasket Set
Valve Cover Gaskets
Engine Valve Cover Gasket Set
from $82.99
This product is not rated
Engine Valve Cover Gasket Set
Valve Cover Gaskets
Harmonic Balancer Bolt
from $16.99
This product is not rated
Harmonic Balancer Bolt
Crankshaft Bolts

What are the top-rated Ford Transit-350 Engine Parts?

Top-rated Engine Parts for your Ford Transit-350 based on customer reviews/ratings are:
Shaft Repair Sleeve
from $41.99
(1)
Shaft Repair Sleeve
“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”