2021 Ford Transit-350 Engine Parts

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:

• OE technology adapted for the aftermarket
• Reduces emissions, increased performance
• Delivers the highest reliability and detection accuracy

O.E. Engine Cam Position Sensor

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
• Refer to our online catalog for detailed application-specific information

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain tensioner guide serves as a guide (or track) for the timing chain and applies tension to the system, connecting crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability and that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
• Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
• Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
• Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
• Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
• Refer to our online catalog for detailed application-specific information

Built on award-winning innovation, Cloyes Variable Valve Timing (VVT) kits deliver precision, performance, and a complete repair. Cloyes, a leader in timing systems since 1921, provides technicians with superior repair solutions. Our award-winning VVT Kits, including camshaft phasers (sprockets), solenoids and timing components, are engineered for precision, durability, and optimal engine performance. Cloyes VVT Kits offer complete repair solution with all necessary components included for an easy install. Made with premium-grade materials to ensure durability and longevity. Each part is production tested to ensure quality fit, function, and performance. Engineered for precise fitment, seamless operation, and easy installation and backed by Cloyes commitment to quality and reliability. SET INCLUDES: 9-4228 Engine Timing Chain (2 EA), 9-5686 Engine Timing Chain Tensioner (2 EA), 9-5688 Engine Timing Chain Guide (1 EA), 9-5689 Engine Timing Chain Tensioner (1 EA), 9-5690 Engine Timing Chain Guide (2 EA), 9-5691 Engine Timing Chain Guide (1 EA), 9-5692 Engine Timing Chain Guide (1 EA), 9-5697 Engine Timing Chain Tensioner Guide (1 EA), C738F Engine Timing Chain (1 EA), S1135 Engine Timing Crankshaft Sprocket (1 EA), VC116 Engine Variable Valve Timing (VVT) Sprocket (2 EA), VC117 Engine Variable Valve Timing (VVT) Sprocket (2 EA), VTS116 Engine Variable Valve Timing (VVT) Solenoid (2 EA), VTS117 Engine Variable Valve Timing (VVT) Solenoid (1 EA), VTS118 Engine Variable Valve Timing (VVT) Solenoid (1 EA).

Product Features:

• OE-Quality: Manufactured using premium-grade materials to meet or exceed OE specifications ensuring durability and long-lasting performance.
• Production Tested for individual part performance and system fit, reducing the risk of installation issues or comebacks
• Complete Repair Kits: Includes gaskets, o-rings, and any necessary fasteners needed for a full, professional repair, reducing the risk of comebacks.
• Backed by Limited Warranty and century-long reputation offering unmatched repair confidence in every component.
• Refer to our online catalog for detailed application-specific information

Built on award-winning innovation, Cloyes Variable Valve Timing (VVT) kits deliver precision, performance, and a complete repair. Cloyes, a leader in timing systems since 1921, provides technicians with superior repair solutions. Our award-winning VVT Kits, including camshaft phasers (sprockets), solenoids and timing components, are engineered for precision, durability, and optimal engine performance. Cloyes VVT Kits offer complete repair solution with all necessary components included for an easy install. Made with premium-grade materials to ensure durability and longevity. Each part is production tested to ensure quality fit, function, and performance. Engineered for precise fitment, seamless operation, and easy installation and backed by Cloyes commitment to quality and reliability. SET INCLUDES: 9-4228 Engine Timing Chain (2 EA), 9-5686 Engine Timing Chain Tensioner (2 EA), 9-5689 Engine Timing Chain Tensioner (1 EA), 9-5690 Engine Timing Chain Guide (2 EA), 9-5691 Engine Timing Chain Guide (1 EA), 9-5692 Engine Timing Chain Guide (1 EA), 9-5697 Engine Timing Chain Tensioner Guide (1 EA), 9-6111 Engine Timing Chain Guide (1 EA), C738F Engine Timing Chain (1 EA), S1135 Engine Timing Crankshaft Sprocket (1 EA), VC116 Engine Variable Valve Timing (VVT) Sprocket (2 EA), VC117 Engine Variable Valve Timing (VVT) Sprocket (2 EA), VTS116 Engine Variable Valve Timing (VVT) Solenoid (2 EA), VTS117 Engine Variable Valve Timing (VVT) Solenoid (2 EA).

Product Features:

• OE-Quality: Manufactured using premium-grade materials to meet or exceed OE specifications ensuring durability and long-lasting performance.
• Production Tested for individual part performance and system fit, reducing the risk of installation issues or comebacks
• Complete Repair Kits: Includes gaskets, o-rings, and any necessary fasteners needed for a full, professional repair, reducing the risk of comebacks.
• Backed by Limited Warranty and century-long reputation offering unmatched repair confidence in every component.
• Refer to our online catalog for detailed application-specific information

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
• Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
• Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
• Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing. CAD designed and manufactured using premium materials,
• All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
• Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
• Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
• Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing. CAD designed and manufactured using premium materials,
• All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
• Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
• Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
• Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing. CAD designed and manufactured using premium materials,
• All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
• Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

Variable Valve Timing (VVT) Sprockets, also known as camshaft phaser, offer technicians a repair solution for higher mileage vehicles and include all necessary components for a complete repair. Designed and manufactured using premium materials. 100% tested and measured for function, fitment, and durability to ensure optimal performance. Test parameters include adjustable angle, leakage, locking pin functionality and friction. Includes new camshaft phaser torque-to-yield (TTY) attachment bolts including valving bolts to ensure proper installation and phaser function. Cloyes recommends replacing the timing chain, tensioners, sprockets, and guides alongside VVT components to maintain system stability and ensure precise engine timing. Trusted by professionals for over a century and backed by an industry-leading warranty and technical support.

Product Features:

• Precision-tooled tooth form ensures exact camshaft timing and reliable performance
• High-quality materials for long-lasting durability under extreme heat, pressure, and wear
• 100% production-tested for adjustable angle, leakage, locking pin function, and friction to guarantee precise fit and function
• Includes torque-to-yield attachment bolts including valving bolts for proper installation, reducing the risk of failures or comebacks
• Seamlessly integrates with existing timing systems, helping technicians restore engine efficiency with confidence
• Backed by Cloyes Limited Warranty and technical support, providing peace of mind on every repair.

Variable Valve Timing (VVT) Sprockets, also known as camshaft phaser, offer technicians a repair solution for higher mileage vehicles and include all necessary components for a complete repair. Designed and manufactured using premium materials. 100% tested and measured for function, fitment, and durability to ensure optimal performance. Test parameters include adjustable angle, leakage, locking pin functionality and friction. Includes new camshaft phaser torque-to-yield (TTY) attachment bolts including valving bolts to ensure proper installation and phaser function. Cloyes recommends replacing the timing chain, tensioners, sprockets, and guides alongside VVT components to maintain system stability and ensure precise engine timing. Trusted by professionals for over a century and backed by an industry-leading warranty and technical support.

Product Features:

• Precision-tooled tooth form ensures exact camshaft timing and reliable performance
• High-quality materials for long-lasting durability under extreme heat, pressure, and wear
• 100% production-tested for adjustable angle, leakage, locking pin function, and friction to guarantee precise fit and function
• Includes torque-to-yield attachment bolts including valving bolts for proper installation, reducing the risk of failures or comebacks
• Seamlessly integrates with existing timing systems, helping technicians restore engine efficiency with confidence
• Backed by Cloyes Limited Warranty and technical support, providing peace of mind on every repair.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
• The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
• The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
• The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
• The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
• The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
• The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

Product Features:

• Built with premium materials and OEM-matching connectors for plug-and-play compatibility, simplifying installation
• Designed for consistent oil flow control to optimize camshaft timing, improving engine response and fuel efficiency
• 100% production-tested for fitment, leakage, maximum oil flow, and duty cycle, ensuring reliable performance under all conditions
• Includes necessary attachment bolts, gaskets, O-rings, and guaranteed fitment with OEM wiring connectors to ensure proper installation and solenoid function
• Supported by Cloyes limited warranty and technical support, providing peace of mind on every repair.

Product Features:

• Built with premium materials and OEM-matching connectors for plug-and-play compatibility, simplifying installation
• Designed for consistent oil flow control to optimize camshaft timing, improving engine response and fuel efficiency
• 100% production-tested for fitment, leakage, maximum oil flow, and duty cycle, ensuring reliable performance under all conditions
• Includes necessary attachment bolts, gaskets, O-rings, and guaranteed fitment with OEM wiring connectors to ensure proper installation and solenoid function
• Supported by Cloyes limited warranty and technical support, providing peace of mind on every repair.

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
• The VVT solenoids meets the demands of today’s VVT engines at both low and high RPMs.
• The VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
• The VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
• The VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
• The VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
• The VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

Product Features:

• Built with premium materials and OEM-matching connectors for plug-and-play compatibility, simplifying installation
• Designed for consistent oil flow control to optimize camshaft timing, improving engine response and fuel efficiency
• 100% production-tested for fitment, leakage, maximum oil flow, and duty cycle, ensuring reliable performance under all conditions
• Includes necessary attachment bolts, gaskets, O-rings, and guaranteed fitment with OEM wiring connectors to ensure proper installation and solenoid function
• Supported by Cloyes limited warranty and technical support, providing peace of mind on every repair.

Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore, off-set and timing index for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Features precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs
• CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

The Engine Cylinder Head Temperature Sensor provides an input to the engine control module concerning the engine operating temperature. Similar to the engine coolant temperature sensor input, the engine control module will make engine operating condition changes based on engine temperature.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.

The Encore Automotive Valve Cover is a critical component engineered to create a tight, reliable seal at the top of the engine¿s cylinder head, preventing oil leaks and protecting vital engine parts. Manufactured using premium materials, this valve cover is designed to replace cracked, warped, or worn-out covers and restore your engine¿s original performance and appearance. Encore Automotive partners with the world¿s leading automakers to deliver Genuine OE and high-quality aftermarket solutions ¿ because when it comes to fit, durability, and convenience, Encore has you covered.

Product Features:

• Recommended Related Repair ¿ For best results, it is recommended to replace the spark plugs and ignition coils while performing a valve cover repair
• Recommended Related Repair ┐ For best results, it is recommended to replace the spark plugs and ignition coils while performing a valve cover repair
• Premium Materials ¿ Constructed to resist cracking, warping, and oil leaks under high engine temperatures
• Premium Materials ┐ Constructed to resist cracking, warping, and oil leaks under high engine temperatures
• OE-Style Grommets, Gasket & Hardware Included

The Encore Automotive Valve Cover is a critical component engineered to create a tight, reliable seal at the top of the engine¿s cylinder head, preventing oil leaks and protecting vital engine parts. Manufactured using premium materials, this valve cover is designed to replace cracked, warped, or worn-out covers and restore your engine¿s original performance and appearance. Encore Automotive partners with the world¿s leading automakers to deliver Genuine OE and high-quality aftermarket solutions ¿ because when it comes to fit, durability, and convenience, Encore has you covered.

Product Features:

• Recommended Related Repair ¿ For best results, it is recommended to replace the spark plugs and ignition coils while performing a valve cover repair
• Recommended Related Repair ┐ For best results, it is recommended to replace the spark plugs and ignition coils while performing a valve cover repair
• Premium Materials ¿ Constructed to resist cracking, warping, and oil leaks under high engine temperatures
• Premium Materials ┐ Constructed to resist cracking, warping, and oil leaks under high engine temperatures
• OE-Style Grommets, Gasket & Hardware Included

ENGINE VALVE COVER

Product Features:

• PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
• UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
• MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
• SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Product Features:

• PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
• UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
• MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
• SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

This engine cylinder head temperature sensor is designed to match the fit, function and appearance of the original sensor on specified vehicles. It is engineered to help restore cylinder head temperature measurement function when an original sensor fails due to an internal short circuit, mechanical shock, or other damage.

Product Features:

• Direct replacement – this engine cylinder head temperature sensor is designed to match the fit and function of an original sensor on specified vehicles
• Ideal solution – engineered to help restore temperature sensor function when an original sensor fails as a result of electrical faults, shock, or other damage
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Anchor 3318 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2015-2021
• Weight approx: 3 Lbs
• Hydraulic
• Part Group: 3318, 3318, 3319

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
• SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SUPERIOR SEAL – Manufactured with rubber compounds to help ensure a consistent and long-life seal
• PRECISE DESIGN – Engineered to work with the embossed cover and pan flanges
• PREVENTS OVERTIGHTENING – Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
• OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Seals are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
• QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
• ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
• INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
• COVERAGE – Available for domestic and foreign nameplate vehicles

Product Features:

• Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
• Insignificant shrinkage and loss of mass even in high-heat environments
• Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
• Sealing gap 0.006 in (0.15 mm)