Ford Police Interceptor Sedan Exhaust Parts

Essential Ford Police Interceptor Sedan Exhaust Parts

Mahle – Cat. Converter Gaske (Part No.H4001356527MAH)

Cat. Converter Gaske

from

$13.56
Cat. Converter Gaske

Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.25" In, 2.5" Out, Oval (Part No.53753)

Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.25" In, 2.5" Out, Oval

from

$168.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler

Product Features:
  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
See More

Dynomax – Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.25" In, 2.5" Out, Oval (Part No.53752)

Ultra Flo Muffler: Direct Fit, Stainless Steel, 14" L, 2.25" In, 2.5" Out, Oval

from

$219.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler

Product Features:
  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
See More

Walker – CalCat Manifold Converter- CARB Certified, Direct Replacement, No Fabrication Needed (Part No.84577)

CalCat Manifold Converter- CARB Certified, Direct Replacement, No Fabrication Needed

from

$1807.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Manifold Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
  • DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
  • BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
See More

Walker – EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed (Part No.16728)

EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed

from

$568.99
Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker® Ultra® EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-256)

Manifold Converter - Not Carb Compliant - Not For Sale - NY - CA - ME

from

$681.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03414B)

Exhaust Manifold Hardware Kit

from

$25.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61525)

Exhaust Pipe Flange Gasket

from

$8.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61620)

Exhaust Pipe Flange Gasket

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61774)

Exhaust Pipe Flange Gasket

from

$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Walker – 2 Bolt Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials (Part No.31632)

2 Bolt Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials

from

$7.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97218)

Exhaust Manifold Gasket Set

from

$48.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97217)

Exhaust Manifold Gasket Set

from

$44.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Dorman – Manifold Converter – Not CARB Compliant (Part No.674-255)

Manifold Converter - Not CARB Compliant

from

$645.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Walker – CalCat Manifold Converter- CARB Certified, Direct Replacement, No Fabrication Needed (Part No.84578)

CalCat Manifold Converter- CARB Certified, Direct Replacement, No Fabrication Needed

from

$1361.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Manifold Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
  • DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
  • BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
See More

Walker – EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed (Part No.16721)

EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed

from

$639.99
Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker® Ultra® EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

Dorman – Exhaust Manifold Har (Part No.H1012691100DOR)

Exhaust Manifold Har

from

$34.11
Exhaust Manifold Har

Helping You Find the Right Exhaust Parts for Your Ford Police Interceptor Sedan

You love your Police Interceptor Sedan. So we’ve made it easier than ever to help you find Ford Police Interceptor Sedan Exhaust Parts in our online catalog. Our inventory holds 21 aftermarket and OEM Exhaust Parts for your Ford Police Interceptor Sedan, ranging from $7.49 to $1,807.99.

We offer parts from 6 brands trusted to make quality Exhaust Parts for your Ford Police Interceptor Sedan. Before you buy, take some time to read through customer reviews. We currently have 326 reviews of Ford Police Interceptor Sedan Exhaust Parts from previous customers.

Find your Police Interceptor Sedan Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Police Interceptor Sedan part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Exhaust Parts Brands for Your Ford Police Interceptor Sedan

Our inventory holds Exhaust Parts for your Ford Police Interceptor Sedan from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Walker, Felpro, and Dorman, all of which can keep that Ford happy.

FAQs for Ford Police Interceptor Sedan Exhaust Parts

What are the most purchased Exhaust Parts for the Ford Police Interceptor Sedan?

Out of 21 Exhaust Parts for the Ford Police Interceptor Sedan, the most popular in our inventory are:
Exhaust Pipe Flange Gasket
from $8.79
This product is not rated
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets
Exhaust Pipe Flange Gasket
from $8.99
This product is not rated
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets
Exhaust Manifold Hardware Kit
from $25.99
(2)
Exhaust Manifold Hardware Kit
Exhaust Manifold Hardware Kits