Ford Mustang Control Arms

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

The S197 requires geometry correction once the rear of the car has been lowered to correct the rear lower control arm angles. Whiteline’s rear control arm brackets relocate the control arms to correct the modified geometry and improve anti-squat, reducing rear-dive under acceleration.

Product Features:

• Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Precisely placed dampening voids further reduces harshness from sudden road inputs.

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.

Product Features:

• Engineered for OE fit, form and function
• Application specific, direct fitment for trouble-free installation
• Corrosion-resistant coating on steel control arms to reduce rust and extend service life
• Pre-installed ball joints and bushings (when applicable) for easy installation
• Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
• Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
• Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
• Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
• Hardware included on many applications for easier installation

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Metal rib design helps lock the inner tube within frame pocket
• Metal surfaces are phosphate coated for corrosion protection

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Bushings manufactured from high quality elastomer compounds for durability and ride performance
• Assembled with proper precompression for ultimate in performance and feel

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

• Maintains Better Alignment While Driving
• Full Floating and Non Binding
• Fits Into the Remaining Stock Control Arms

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment bushing on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

With performance permanently ingrained in mind, these Whiteline high performance, vertical links are designed from high performance 6061-T6 forged aviation grade aluminium. The design is built with a sturdy and robust I beam design, which completely eliminates all the undesirable effects caused by the high compliant rubber bushings and OEM, low cost, pressed steel design linkage. Utilizing a CNC precision machined forging, gives you the peace of mind that the vertical link mounting length has been maintained and the suspension geometry remains consistent and true the way it was intended. Installed with minimal flex polymer, grease free bushings, removes the nasty undesirable effects of rubber bushing oscillations under high loading, maintaining consistent alignment angles during cornering and eliminating wheel hop. The Whiteline vertical link is a must have item for the Mustang if suspension performance is paramount.

Product Features:

• Articulation voids deliver necessary suspension articulation and/or compression under loads.

This suspension integral link is precision-engineered and rigorously tested to match the fit and function of the original equipment part on specific vehicles.

Product Features:

• Direct replacement – this integral link fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using quality materials
• Rigorously tested – thorough quality control measures ensure longevity

Suspension Control Arm Link

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Improves steering response
• Complete kit for 1 arm
• Heat treated steel bushings OR torsional rubber bushings
• Reduces vibration

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Improves vehicle handling
• Restores OE alignment
• Improves steering geometry
• Easy camber adjustment

Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:

• Heat Treated thread and bushing
• Torsional rubber bushings
• Precision thread tolerances
• Greaseable

The S197 chassis’ stock lower control arms leave much to be desired and contribute to the inherent traction and wheel hop problems from the factory. Whiteline’s lower control arms are made from tubular DOM steel tube with Forged Ends for optimal strength and feature our Giiro bushings, engineered specific for this application. Our Grease Free, non-bonded bushing design allows the crush tubes to free float, eliminating bushing wind and snap back, increasing handling predictability, and eliminating maintenance and NVH.

Product Features:

• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.

Whiteline’s upper control arms are built with tubular DOM steel tubing, forged end rings, and formed clevises for optimal strength. Equipped with grease free GIIRO bushings engineered specifically for this application, these arms work to improve handling, without added maintenance or NVH.

Product Features:

• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

The S197 chassis third link set up has suffered from brake hop and axle tramp with the stock arm and the ultra-compliant stock bushing is designed for comfort and leaves something desired for performance driving. Whiteline’s upper control arm is built with 4130 Chromalloy and features the longer arm length which Ford incorporated in the 2011 change which reduces brake hop. The synthetic elastomer bushing adds increased stability to the rear end without the harshness of the commonly used bearing design and features and eccentric crush tube which allows pinion angle / instant centre adjustment without weakening the arm with a turnbuckle adjustment. The pinhole voiding feature allows the bushing to articulate without binding. The heavy duty mount adds to the increased rigidity of the arm and is designed to be universal for all years of the S197 chassis.

Product Features:

• Engineered to alter/ optimise vehicles pinion angle to minimise vibration and increase rear drive power/torque to the wheels.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.

The S197 chassis third link set up has suffered from brake hop and axle tramp with the stock arm and the ultra-compliant stock bushing is designed for comfort and leaves something desired for performance driving. Whiteline’s upper control arm is built with 4130 Chromalloy and features the longer arm length which Ford incorporated in the 2011 change which reduces brake hop. The synthetic elastomer bushing adds increased stability to the rear end without the harshness of the commonly used bearing design and features and eccentric crush tube which allows pinion angle / instant centre adjustment without weakening the arm with a turnbuckle adjustment. The pinhole voiding feature allows the bushing to articulate without binding. The heavy duty mount adds to the increased rigidity of the arm and is designed to be universal for all years of the S197 chassis.

Product Features:

• Engineered to alter/ optimise vehicles pinion angle to minimise vibration and increase rear drive power/torque to the wheels.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Product Features:

• EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Engineered to match or exceed OE requirements
• ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

New Goodmark Driver Or Passenger Side Front Lower Control Arm Assembly, 2 Required

Product Features:

• 2 Required
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Product Features:

• EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE – Engineered to match or exceed OE requirements
• ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose