Ford LS8000 Parts
Top Ford LS8000 Parts Categories
Ford LS8000 Batteries and Chargers
DieHard HD Battery – Battery: 31T Group Size, 750 CCA, 935 CA, 180 Minute Reserve Capacity, Heavy Duty (Part No.31XS-30)
from
$149.99
DieHard Heavy Duty batteries deliver the starting power your heavy-duty applications need. These batteries are designed for commercial trucks, heavy duty and agricultural applications.
Product Features:
See More
Product Features:
- Full frame stamped positive grid design provides increased corrosion resistance and superior cranking power
- High density paste improves cycling capability
- Polypropylene ribbed case and reinforced end-walls for extra durability
- Anchor bonding locks elements in place to dramatically improve life with superior vibration resistance
Optima – Battery: 31T Group Size, 900 CCA, 1125 CA, 155 Minute Reserve Capacity, Deep-Cycle (Part No.D31T-1125)
from
$401.99
The OPTIMA YELLOWTOP high-performance AGM battery is the ULTIMATE POWER SOURCE and one of the few true dual-purpose automotive batteries available. With premium cranking power and impressive cycling capability, this heavy-duty battery is ideal for trucks with winches, vehicles with high-demand electronics and audio systems, commercial vehicles and heavy equipment. Don’t want to bother with installing your new OPTIMA battery? Stop by your nearest Advance Auto Parts store and take advantage of our FREE battery testing and installation on most vehicles and at most locations. We offer free battery and electrical system testing and free recycling of your old automotive battery. Advance Auto Parts offers helpful advice about a variety of products, including car batteries. Be sure to check out the following:
Product Features:
See More
Product Features:
- SPIRALCELL TECHNOLOGY with 99.99% pure lead delivers more power and consistently outperforms conventional flat-plate batteries
- Up to 3 times longer life vs. standard flooded batteries
- 15x the vibration resistance of a standard flooded battery
- Completely non-spillable, mountable in many positions
- Maintenance free for maximum convenience
- Faster recharging capabilities
DieHard HD Battery – Battery: 31T Group Size, 825 CCA, 1000 CA, 200 Minute Reserve Capacity (Part No.NG31CS)
from
$268.99
DieHard Heavy Duty batteries deliver the starting power your heavy-duty applications need. These batteries are designed for commercial trucks, heavy duty and agricultural applications.
Product Features:
See More
Product Features:
- Full frame stamped positive grid design provides increased corrosion resistance and superior cranking power
- High density paste improves cycling capability
- Polypropylene ribbed case and reinforced end-walls for extra durability
- Anchor bonding locks elements in place to dramatically improve life with superior vibration resistance
DieHard HD Battery – Farm and Truck Battery: 31S Group Size, 950 CCA, 1140 CA, 175 Minute Reserve Capacity, Heavy Duty (Part No.31S30)
from
$159.99
These batteries do the job for commercial trucks, heavy duty and agricultural applications.
Product Features:
See More
Product Features:
- Up to 2x the life of a standard flooded battery.
- Patented stamped grid technology in both positive and negative grids, resulting in superior performance and longer life in high heat and demanding environments.
- Superior vibration resistance
- Certified NONSPILLABLE for safety and flexibility in mounting location.
- The heavy duty internal connectors ensure a solid connection between plates and top lead, enabling better internal electric flow
DieHard HD Battery – Battery: 31T Group Size, 1000 CCA, 1190 CA, 185 Minute Reserve Capacity, Heavy Duty (Part No.31HDS30)
from
$195.99
DieHard Heavy Duty batteries deliver the starting power your heavy-duty applications need. These batteries are designed for commercial trucks, heavy duty and agricultural applications.
Product Features:
See More
Product Features:
- Full frame stamped positive grid design provides increased corrosion resistance and superior cranking power
- High density paste improves cycling capability
- Polypropylene ribbed case and reinforced end-walls for extra durability
- Anchor bonding locks elements in place to dramatically improve life with superior vibration resistance
Ford LS8000 Belts and Hoses
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, .81" Diameter (Part No.B70876)
from
$8.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Automotive XL« High Capacity V-Belt (Part No.9640)
from
$34.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Dayco – Bottom Cog V-Belt; 66 Inch Long, Exact Fit Premium Quality (Part No.17660)
from
$24.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Dayco – Bottom Cog V-Belt; 64 Inch Long, Exact Fit Premium Quality (Part No.17640)
from
$23.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Gates – Automotive XL« High Capacity V-Belt (Part No.9400)
from
$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9670HD)
from
$46.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at extremely prolonged operating temperatures
- Heavy-duty construction resists cracking, wear, oil and heat
- Special compound provides unmatched stability, load carrying capacity and belt life
- Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
- Problem solver for troubled drives
- Engineered to save your fleet money and reduce downtime
- Meets RMA oil and heat resistant standards and static conductivity requirements
Driveworks – Automotive V-Belt (Part No.57017)
from
$4.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Dayco – Bottom Cog V-Belt; 67.5 Inch Long, Exact Fit Premium Quality (Part No.17675)
from
$21.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Dayco – Bottom Cog V-Belt; 58 Inch Long, Exact Fit Premium Quality (Part No.17580)
from
$20.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.75" Long, 2" Diameter (Part No.D70908)
from
$21.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.50" Long, 2.50" Diameter (Part No.E70909)
from
$28.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Flex Radiator Hoses; Neoprene, HD, 17 Inch Long, 2.25 Inch to 2 Inch Inner Dia. (Part No.82151GL)
from
$56.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
Gates – Premium Molded Coolant Hose (Part No.21115)
from
$38.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Molded Heater Hose: EPDM, Steel, Direct Fit, 2.25" Inside Diameter (Part No.26522)
from
$55.99
Product Features:
See More
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and Neoprene cover for extended service life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Resistant to heat, oil and ozone
- Performs to SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – Premium Molded Coolant Hose (Part No.20431)
from
$36.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Ford LS8000 Steering and Chassis Parts
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Heavy Duty Pump Seal Kit (Part No.8702)
from
$37.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Heavy Duty Steering Gear Major Seal Kit (Part No.8706)
from
$231.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Heavy Duty Steering Gear Major Seal Kit (Part No.8703)
from
$99.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Heavy Duty Steering Gear Major Seal Kit (Part No.8707)
from
$202.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Heavy Duty Steering Gear Major Seal Kit (Part No.8704)
from
$116.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Ford LS8000 Cooling and Climate Controls
Factory Air – Evaporator Core Repair Kit w/ White Orifice Tube (Part No.16152)
from
$18.29
Optimized refrigerant flow; Core design meets or exceeds OE performance And efficiency; Application specific design for GM vehicles; Replaces damaged evaporator inlet tube
See More
Gates – Heavy-Duty Engine Water Pump (Part No.43233HD)
from
$199.99
Gates carries a huge line of water pumps for heavy duty applications. Our heavy duty water pump offering is designed to handle rugged Fleet standards.
Product Features:
See More
Product Features:
- Our heavy-duty water pump o┐ering is designed to handle severe and rigorous conditions
- 100 percent fully tested unitized bearings and seals
- Computerized machined surfaces for proper fit and sealing
- Gates heavy-duty water pumps are represented as a part number with an HD suffix
- New pumps manufactured to ISO/TS 16949 standards
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T3011)
from
$139.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Carquest Premium – Coolant Spin-on with BTE Formula (Part No.89071)
from
$28.49
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.
Product Features:
See More
Product Features:
- Standard life Spin-on coolant filter
- Made in USA
- Includes 4 Units BTE
- Maintenance filter for systems with 11-20 gallons capacity. Can be used with 89019 base.
Carquest Premium – Coolant Spin-on without Chemicals (Part No.89069)
from
$21.29
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.
Product Features:
See More
Product Features:
- Standard life Spin-on coolant filter
- Made in USA
- Can be used with 89019 base.
Carquest Premium – Heater Core (Part No.394158)
from
$56.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Carquest Premium – Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)
from
$15.99
This item for automotive air conditioning system Freon throttling and antihypertensive effect.
Product Features:
See More
Product Features:
- Throttling
- Injection molded
- Color coded
Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)
from
$15.79
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- Color coded
Carquest Premium – A/C Blue Orifice Tube (10 pkg) (Part No.T621)
from
$24.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- Application specific design
- Color coded
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Search Over 89 Ford LS8000 Parts Online for Delivery or Pick Up
Looking for the best Ford LS8000 aftermarket replacement parts? Replacing worn and broken parts on your Ford LS8000? Check out our online catalog to find the best selection of aftermarket Ford LS8000 parts as well as real user reviews on Ford LS8000 replacement parts. Make an informed decision about every component you add to your LS8000.
At Advance Auto, we’ve got you covered when it comes to getting your Ford LS8000 in tip top condition. We’ve got over 89 Ford LS8000 parts to choose from in popular categories like Batteries and Chargers, Belts and Hoses and Steering and Chassis Parts. If you’re looking for the best prices, try searching our Ford LS8000 parts catalog to compare OEM and aftermarket parts for your Ford LS8000.
Whether you need Ford LS8000 body parts, interior components, or custom Ford LS8000 parts you can find them online at Advance Auto. Want to order your Tools online? Or maybe you need your Ford Cooling and Climate Controls same day? No problem, you can pick up LS8000 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Ford LS8000 parts has never been easier.
Popular Types of Parts for Ford LS8000
Advance Auto customers frequently search for the following types of Ford LS8000 auto parts. Check out customer reviews and ratings, and compare prices on the following Ford LS8000 parts:
Find Parts for Your Ford LS8000 by Year
People also search Advance Auto for these popular years of the Ford LS8000:
