Ford Gran Torino Drivetrains

Essential Ford Gran Torino Drivetrains

Yukon Gear – Pinion Install Kit For Ford 9" Differential (Part No.13042)

Pinion Install Kit For Ford 9" Differential

from

$175.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ without aftermarket Daytona pinion support
  • Included are pinion bearings and races, pinion seal, pilot bearing , crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Minor Install Kit For Ford 9" Differential (Part No.12036)

Minor Install Kit For Ford 9" Differential

from

$54.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), marking compound and brush.

Product Features:
  • Fits Ford 9″
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

National – Bearings (Part No.208-LO)

Bearings

from

$49.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Yoke (Short, For Daytona Support) For Ford 9" With 28 Spline Pinion And A 1330 U/Joint Size (Part No.41055)

Yoke (Short, For Daytona Support) For Ford 9" With 28 Spline Pinion And A 1330 U/Joint Size

from

$203.99
Yukon yoke (short, for Daytona support) for Ford 9″ with 28 spline pinion and a 1330 U/joint size. 4″ length. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″
  • 28 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.125″ cap diameter
  • U-bolt style
See More

FAG US – BEARING (Part No.6207)

BEARING

from

$15.49
BEARING

Powertrax – Lock Right Locker (Part No.1810-LR)

Lock Right Locker

from

$339.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

    Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

    from

    $4.99
    Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

    Product Features:
    • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
    See More

    Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

    Tapered Cup Wheel Bearing Assembly

    from

    $8.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – 0.260" Diameter Cross Pin Roll Pin For 8.75" Chrysler, 8", 9" Ford, And Model 20 And 35 (Part No.33334)

    0.260" Diameter Cross Pin Roll Pin For 8.75" Chrysler, 8", 9" Ford, And Model 20 And 35

    from

    $5.99
    0.260″ diameter cross pin roll pin for 8.75″ Chrysler, 8″, 9″ Ford, and Model 20 and 35.

    Product Features:
    • Roll pin for Chrysler 8.75″, Ford 8″ and 9″, AMC Model 20 and Model 35
    • 0.260″ diameter
    See More

    Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)

    Trac Loc Spring Plate For Ford 9" & 8"

    from

    $10.99
    Product Features:
    • Trac Loc spring plate for Ford 8″ and 9″
    See More

    Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-013.1)

    Spindle Washer - I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In.

    from

    $4.29
    This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Felpro – Differential Carrier Gasket (Part No.RDS 55074)

    Differential Carrier Gasket

    from

    $8.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Spicer – Universal Joint (Part No.5-1310X)

    Universal Joint

    from

    $35.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    FAG US – CONE (Part No.KL68149)

    CONE

    from

    $13.99
    CONE

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Yukon Gear – Tapered Axle Bearing And Seal Kit, 3.150" Od, For 9" Ford (Part No.10058)

    Tapered Axle Bearing And Seal Kit, 3.150" Od, For 9" Ford

    from

    $111.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Tapered axle bearing and seal kit, 3.150″ OD, for 9″ Ford. This axle bearing & seal kit services one side only.

    Product Features:
    • Axle bearing and seal kit for Ford 9″ rear
    • Includes axle bearing and seal
    • Tapered roller design
    • 3.150″ O.D.
    • 1.562″ I.D.
    • Services one side
    See More

    Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

    Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

    from

    $5.99
    Product Features:
    • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
    • 0.030″ thick
    See More

    Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

    Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

    from

    $8.99
    Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

    Product Features:
    • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
    See More

    Neapco – Universal Joint (Part No.1-0025)

    Universal Joint

    from

    $2.59
    Universal Joint Strap Kit
    See More

    Motive Gear – Differential Mini Spool (Part No.MS9-31)

    Differential Mini Spool

    from

    $31.99


    Product Features:
    • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
    See More

    Motive Gear – Differential Ring and Pinion (Part No.F9-471A)

    Differential Ring and Pinion

    from

    $199.99
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    National – Shaft Repair Sleeve (Part No.99199)

    Shaft Repair Sleeve

    from

    $37.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – Outer Axle Seal For Set 20 Bearing (Part No.30030)

    Outer Axle Seal For Set 20 Bearing

    from

    $14.99
    Outside seal (included in TK set20).Yukon Mighty seal.

    Product Features:
    • Outer axle seal
    • Works with Set20 bearing
    See More

    Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

    Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

    from

    $3.99
    Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

    Product Features:
    • Side adjuster lock bolt
    See More

    Ford Gran Torino Drivetrains Categories

    Helping You Find the Right Drivetrains for Your Ford Gran Torino

    You love your Gran Torino. So we’ve made it easier than ever to help you find Ford Gran Torino Drivetrains in our online catalog. Our inventory holds 445 aftermarket and OEM Drivetrains for your Ford Gran Torino, ranging from $1.99 to $1,566.99.

    We offer parts from 17 brands trusted to make quality Drivetrains for your Ford Gran Torino. Before you buy, take some time to read through customer reviews. We currently have 79,266 reviews of Ford Gran Torino Drivetrains from previous customers. Some of the top rated parts include Greaseable Super Strength Universal Joint with 3.9 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.

    Find your Gran Torino Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Gran Torino part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

    Top Drivetrains Brands for Your Ford Gran Torino

    Our inventory holds Drivetrains for your Ford Gran Torino from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, Driveworks, and Spicer, all of which can keep that Ford happy.
    We have Felpro parts available for your Ford Gran Torino in categories like Differentials. Some of the top-rated Felpro parts in these categories are:
    Differential Carrier Gasket
    from $8.49
    (9)
    Differential Carrier Gasket
    Automatic Transmission Differential Cover Gaskets

    Top-Rated MOOG Driveline Products Drivetrains

    Leading MOOG Driveline Products Drivetrains

    We carry MOOG Driveline Products brand parts for your Ford Gran Torino across several catalog categories, including Universal Joints. Some of our most reviewed MOOG Driveline Products parts include:
    Greaseable Premium Universal Joint
    from $25.99
    (143)
    Greaseable Premium Universal Joint
    U-Joints
    Greaseable Premium Universal Joint
    from $19.99
    (82)
    Greaseable Premium Universal Joint
    U-Joints
    Greaseable Super Strength Universal Joint
    from $32.99
    (37)
    Greaseable Super Strength Universal Joint
    U-Joints

    FAQs for Ford Gran Torino Drivetrains

    What are the most purchased Drivetrains for the Ford Gran Torino?

    Out of 445 Drivetrains for the Ford Gran Torino, the most popular in our inventory are:
    Universal Joint
    from $15.99
    (33)
    Universal Joint
    U-Joints
    Universal Joint
    from $15.99
    (65)
    Universal Joint
    U-Joints

    What are the top-rated Ford Gran Torino Drivetrains?

    Top-rated Drivetrains for your Ford Gran Torino based on customer reviews/ratings are:
    Greaseable Super Strength Universal Joint
    from $36.99
    (35)
    Greaseable Super Strength Universal Joint
    “Good ujoint”
    Non-Greaseable Super Strength Universal Joint
    from $32.99
    (28)
    Non-Greaseable Super Strength Universal Joint
    “installed as needed”
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    “Advance Auto website when entering my 1989 Ford F150 doesn’t ask if it is 2 wheel or 4 wheel drive. So I had to return the first set”