Ford F-350 Drivetrains

Essential Ford F-350 Drivetrains

Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)

Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles

from

$659.99
Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Driveworks – Oil Seal (Part No.S-3173)

Oil Seal

from

$5.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Crush Sleeve (Part No.33085)

Crush Sleeve

from

$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:
  • Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
  • 0.480″ tall
See More

Yukon Gear – Drive Flange Cap For Dana 60 (Part No.32132)

Drive Flange Cap For Dana 60

from

$129.99
Product Features:
  • Drive flange cap
  • Fits Dana 60
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

USA Standard Gear – 4340 Chrome-Moly Axle Kit For ’78-’79 Ford 60 Front, 35 Spline With Super Joints (Part No.35153)

4340 Chrome-Moly Axle Kit For '78-'79 Ford 60 Front, 35 Spline With Super Joints

from

$1757.99
Product Features:
  • 35 spline inner and outer axles
  • Fits Dana Spicer 60 in 1978-1979 F350
  • Includes inner and outer 4340 Chromoly axles and Yukon Super Joints
See More

Spicer – Universal Joint (Part No.5-793X)

Universal Joint

from

$39.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

National – Bearings (Part No.469)

Bearings

from

$45.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.59016)

Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down

from

$369.99
Product Features:
  • Fits Chrysler Dana Spicer 60 with 35 spline axles
  • 4.10 and down ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Differential (Part No.26046)

Differential

from

$994.99
Differential

Yukon Gear – Ford 10.25" Rear Axle Bearing And Seal Kit (Part No.10034)

Ford 10.25" Rear Axle Bearing And Seal Kit

from

$274.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for 10.25″ Ford (full-floating). This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:
  • Fits Ford 10.25″
  • Includes inner and outer bearings and races and axle seal
  • Services one side
See More

National – Wheel Bearing and Seal Kit (Part No.SBK-1)

Wheel Bearing and Seal Kit

from

$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Spindle bearing and seal kit
  • Includes all components required to complete the repair
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70 (Part No.32352)

Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70

from

$288.99
Product Features:
  • Nodular iron for added strength
  • Thick design
  • Durable powder coat finish
  • Magnetic drain plug
  • Made in USA
  • High strength stainless steel fasteners
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

National – Bearings (Part No.2720)

Bearings

from

$12.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Front Spindle For Dana 60 Ford, 5 Holes (Part No.32254)

Replacement Front Spindle For Dana 60 Ford, 5 Holes

from

$374.99
Replacement front spindle for Dana 60 Ford, 5 holes, 7″ long, 6.5″ flange, 2.020×2.255bearing.

Product Features:
  • Fits 1978-1979 Ford F250 and 1985-1998 Ford F350 with Dana Spicer front
  • 7.00″ tall
  • 6.5″ flange
  • 5 bolt holes
  • 2.255″ and 2.020″ bearing journals
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Dana 44 Cover Gasket Replacement (Part No.23006)

Dana 44 Cover Gasket Replacement

from

$12.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 44
See More

National – Bearings (Part No.B-2012)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Gear Install Kit (Part No.D80IK)

Differential Gear Install Kit

from

$143.99


Product Features:
  • MINI INSTALL KIT DANA 80
See More

Yukon Gear – Pinion Gear Thruster Washer For 10.25" Ford (Part No.33294)

Pinion Gear Thruster Washer For 10.25" Ford

from

$9.99
Pinion gear thruster washer for 10.25″ Ford.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 10.25″
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Dana 30 / 44 Roll Pin Replacement

from

$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:
  • Roll pin for Dana Spicer 30 and Dana Spicer 44
  • 0.235″ diameter
See More

Yukon Gear – Replacement Pinion Nut Washer For Dana 80 (Part No.33165)

Replacement Pinion Nut Washer For Dana 80

from

$5.99
Product Features:
  • Pinion nut washer
  • Fits Dana Spicer 80
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Ford F-350 Drivetrains Categories

Helping You Find the Right Drivetrains for Your Ford F-350

You love your F-350. So we’ve made it easier than ever to help you find Ford F-350 Drivetrains in our online catalog. Our inventory holds 852 aftermarket and OEM Drivetrains for your Ford F-350, ranging from $2.59 to $2,784.99.

We offer parts from 26 brands trusted to make quality Drivetrains for your Ford F-350. Before you buy, take some time to read through customer reviews. We currently have 31,125 reviews of Ford F-350 Drivetrains from previous customers. Some of the top rated parts include Greaseable Super Strength Universal Joint with 4.2 stars and Greaseable Super Strength Universal Joint with 4.6 stars.

Find your F-350 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford F-350 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Ford F-350

Our inventory holds Drivetrains for your Ford F-350 from 26 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, Valvoline, and Driveworks, all of which can keep that Ford happy.

FAQs for Ford F-350 Drivetrains

What are the most purchased Drivetrains for the Ford F-350?

Out of 852 Drivetrains for the Ford F-350, the most popular in our inventory are:
Greaseable Super Strength Universal Joint
from $36.99
(41)
Greaseable Super Strength Universal Joint
U-Joints
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints
Universal Joint
from $15.99
(65)
Universal Joint
U-Joints

What are the top-rated Ford F-350 Drivetrains?

Top-rated Drivetrains for your Ford F-350 based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
MileMarker Supreme; Manual Hub
from $428.99
(36)
MileMarker Supreme; Manual Hub
“Attractive, affordable option. Easy installation, works well so far.”