"ARP Auto Racing 1.895""Oal Stud, 1""D Adjuster Thread, 3/8""-24, 7/16""-14 Thread, 0.71""D Screw-In, 134-7124"

from

$13.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Felpro PermaTorque Engine Cylinder Head Gasket Set, HIS 8168 PT-7

from

$96.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Sealed Power Engine Rocker Arm Ball Stud, MR-1847

from

$1.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

"Edelbrock RPM Small-Block Ford 2.02"" Cylinder Head Hydraulic Roller Camshaft, 60255"

from

$1087.99

“Edelbrock RPM Small-Block Ford 2.02″” Cylinder Head Hydraulic Roller Camshaft, 60255. ”

Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 8891 PT

from

$155.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

"Edelbrock RPM Small-Block Ford 1.90"" Cylinder Head Hydraulic Flat Tappet Cam, 60229"

from

$1022.99

The Edelbrock #60229 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60229 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

Felpro Engine Valve Cover Grommet Set, ES 71189

from

$16.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Sealed Power Engine Valve Spring Retainer Keeper, VK-115

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Remflex Flexible Graphite, Set Of 2, 1-1/4 Inch X 1-5/8 Inch Square Port Size, 3028

from

$37.99

Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

from

$200.99

The Edelbrock No: 5745 Sure Seat Valve Spring for Edelbrock No: 50459, 79459, 79539, 79559, 60439, 60459, 60479, 60559 & 77479 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

"Competition Cams Stud Girdle for Ford 289, 302, 351W with RHS or Ford Motorsport Head with 7/16"" Stud, 4015"

from

$427.99

“Competition Cams Stud Girdle for Ford 289, 302, 351W with RHS or Ford Motorsport Head with 7/16″” Stud, 4015. ”

ARP Auto Racing For Use With Ford 351 Windsor, Hex Head, 180000Psi Tensile, 154-3603

from

$137.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Sealed Power Engine Rocker Arm Nut, MR-1751

from

$0.95

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Dorman STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (Sold by each), 675-131

from

$4.29

This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.

NTK Engine Cylinder Head Temperature Sensor, EJ0008

from

$35.99

The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Encore Automotive Engine Valve Lifter, VL-D20007

from

$18.99

Encore Automotive Valve Lifter is a steel cylinder designed to maintain zero valve clearance in a combustion engine.

Melling Select Performance Valve Train Set Up Spring, VTSS100

from

$11.79

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

Victor Reinz Engine Cylinder Head Gasket, 61-10346-00

from

$91.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

"Competition Cams Stud Girdle for Ford 429-460 with Factory Head with 7/16"" Stud, 4034"

from

$617.99

“Competition Cams Stud Girdle for Ford 429-460 with Factory Head with 7/16″” Stud, 4034. ”

Felpro Engine Cylinder Head Dowel Pin Set, ES 70744

from

$5.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

from

$156.99

Edelbrock Rocker Shaft Stud Kit, 6009.

ARP Auto Racing For Use With Ford 7.3L Powerstroke, 12 Point Nuts, Black Oxide, Chrome Moly, 250-4201

from

$963.99

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all out competition power plants. Simply stated, there is not a better stud setup on the market today. For openers, ARP uses a premium grade 8740 alloy that is rated far superior to aircraft quality. Each stud is placed vertically in special racks and precisely heat treated to 200,000 PSI. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

from

$2.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

"Edelbrock Valve Seat For S/B Chevy Heads With 1.60"" Valves, 9711"

from

$86.99

The Edelbrock No. 9711 Intake Valve Seat set is a replacement for Edelbrock cylinder heads.

Ford F-250 Pickup Valve Cover and Cylinder Heads

Your One-Stop Shop For Trusted Ford F-250 Pickup Valve Cover and Cylinder Heads

Essential Ford F-250 Pickup Valve Cover and Cylinder Heads

ARP Auto Racing – "ARP Auto Racing 1.895""Oal Stud, 1""D Adjuster Thread, 3/8""-24, 7/16""-14 Thread, 0.71""D Screw-In, 134-7124" (Part No.134-7124)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket Set, HIS 8168 PT-7 (Part No.HIS 8168 PT-7)

Sealed Power – Sealed Power Engine Rocker Arm Ball Stud, MR-1847 (Part No.MR-1847)

Edelbrock – "Edelbrock RPM Small-Block Ford 2.02"" Cylinder Head Hydraulic Roller Camshaft, 60255" (Part No.60255)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 8891 PT (Part No.HS 8891 PT)

Edelbrock – "Edelbrock RPM Small-Block Ford 1.90"" Cylinder Head Hydraulic Flat Tappet Cam, 60229" (Part No.60229)

Felpro – Felpro Engine Valve Cover Grommet Set, ES 71189 (Part No.ES 71189)

Dorman – Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007 (Part No.555-007)

Sealed Power – Sealed Power Engine Valve Spring Retainer Keeper, VK-115 (Part No.VK-115)

Remflex – Remflex Flexible Graphite, Set Of 2, 1-1/4 Inch X 1-5/8 Inch Square Port Size, 3028 (Part No.3028)

Edelbrock – Edelbrock Sure Seat Valve Springs, 5745 (Part No.5745)

Competition Cams – "Competition Cams Stud Girdle for Ford 289, 302, 351W with RHS or Ford Motorsport Head with 7/16"" Stud, 4015" (Part No.4015)

ARP Auto Racing – ARP Auto Racing For Use With Ford 351 Windsor, Hex Head, 180000Psi Tensile, 154-3603 (Part No.154-3603)

Sealed Power – Sealed Power Engine Rocker Arm Nut, MR-1751 (Part No.MR-1751)

Dorman – Dorman STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (Sold by each), 675-131 (Part No.675-131)

NTK – NTK Engine Cylinder Head Temperature Sensor, EJ0008 (Part No.EJ0008)

Encore Automotive – Encore Automotive Engine Valve Lifter, VL-D20007 (Part No.VL-D20007)

Melling Select Performance – Melling Select Performance Valve Train Set Up Spring, VTSS100 (Part No.VTSS100)

Victor Reinz – Victor Reinz Engine Cylinder Head Gasket, 61-10346-00 (Part No.61-10346-00)

Competition Cams – "Competition Cams Stud Girdle for Ford 429-460 with Factory Head with 7/16"" Stud, 4034" (Part No.4034)

Felpro – Felpro Engine Cylinder Head Dowel Pin Set, ES 70744 (Part No.ES 70744)

Edelbrock – Edelbrock Rocker Shaft Stud Kit, 6009 (Part No.6009)

ARP Auto Racing – ARP Auto Racing For Use With Ford 7.3L Powerstroke, 12 Point Nuts, Black Oxide, Chrome Moly, 250-4201 (Part No.250-4201)

Sealed Power – Sealed Power Engine Push Rod, RP-3167 (Part No.RP-3167)

Edelbrock – "Edelbrock Valve Seat For S/B Chevy Heads With 1.60"" Valves, 9711" (Part No.9711)

Ford F-250 Pickup Valve Cover and Cylinder Heads List

Valve Cover and Cylinder Heads Brands You Can Trust For Your Ford F-250 Pickup

Popular Felpro Valve Cover and Cylinder Heads

Top Ford F-250 Pickup Valve Cover and Cylinder Heads from Sealed Power

Most Purchased Ford F-250 Pickup Valve Cover and Cylinder Heads from Sealed Power

FAQs for Ford F-250 Pickup Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the Ford F-250 Pickup?

What are the top-rated Ford F-250 Pickup Valve Cover and Cylinder Heads?

Find Your Ford F-250 Pickup Valve Cover and Cylinder Heads by Year

More Popular Parts for All Makes