Name: Rocker Arms,FS/FW 1.6 7/16 Ultra Pro Mag
Brand: Competition Cams
SKU: 1632-16
Price: 476.99 USD

Essential Ford F-100 Pickup Performance Engines

from

$476.99

Rocker Arms,FS/FW 1.6 7/16 Ultra Pro Mag

from

$30.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$919.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used

from

$26.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$74.99

If you want to update just your camshaft and aren’t doing a complete engine overhaul, this kit contains all the gaskets needed to change out your camshaft. That way you don’t have to buy a complete gasket kit just to change the cam, but still can replace all the gaskets you should in the process.

Product Features:

Contains all the gaskets needed to change out your camshaft
Fuel Injector O-Ring Not Included
Meets Performance Standards

from

$1389.00

Product Features:

Capable of 300 plus horsepower when matched with the Edelbrock Performer Power Package
1.90 in. intake valves are for use with stock pistons
Exhaust valve is 1.60 in.
60cc combustion with 170cc intake port
Flat Tappet Camshaft Type

from

$29.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens at 160 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully opens at Correct Temperature Consistently Regardless of engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$553.99

Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

Maximum Cooling for Street and Racing Engines
Internal Passages Are Balanced for Maximum Flow
Impeller is Larger than Others For Max Pressure
Impeller Vanes Dramatically Increase Flow Rates
Equal Distribution to Both Sides of Block
Only Flows in One-Direction for Optimum Efficiency

from

$65.99

Product Features:

Cylinder Head Gasket Set
1958-1976 390-428

from

$388.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$30.99

Available in kits including front cover gasket, crankshaft seal, fuel pump and water pump gasket or including cover gasket and front seal.

Product Features:

Timing Cover Gasket And Oil Seal Kit

from

$66.99

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.

Product Features:

5/16″ diameter, 6.881″ length for Small Block Ford 255 and 302, ’65-up with Flat Tappet Cam
Best choice when building street rods, RVs or daily drivers
Meet or exceed all OE pushrod specifications
Mate perfectly with High Energy and Magnum Rockers
Durable one-piece construction

from

$404.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$629.99

Keyway Adjustable Billet Timing Set For ’65-’88 Ford 289-351W

from

$98.99

Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:

Valve Spring Retainers for Use OE Cast Iron Heads
Superior Quality Heat-Treated Steel
Machined for Strength with Black Oxide Finish
Finish Ensures Rust and Corrosion Protection

from

$49.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PTFE offers the best in fluid and high-temperature compatibility and contact sealing surface can run on undersize shafts, seal minor imperfections and virtually eliminate shaft wear.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$849.99

Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$45.49

Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:

Heat treated black oxide coated Grade 8 alloy steel
Thick parallel ground washer provides more accurate, uniform torque
Hex Prevents Socket Slippage
Accurate And Uniform Torque
Black Plated Finish

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$33.99

Work with .530″ guides and 3/8″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$27.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$33.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$23.79

Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:

Chrome Plated
This Is A 45 Degree Neck
Comes With O-ring And Bolts
Has Small Hose Fitting On It

from

$35.99

Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.

Product Features:

Complete with gasket and mounting bolts
Chrome plated

Performance Engines Brands You Can Trust For Your Ford F-100 Pickup

5 trusted brands of Performance Engines line our shelves, ready to help keep your Ford F-100 Pickup running smooth. Below are some of the most popular brands and their top Performance Engines offerings:

Popular Competition Cams Performance Engines

Competition Cams products for the Ford F-100 Pickup span several categories. Some of the highest-rated Competition Cams Performance Engines that will fit your Ford F-100 Pickup are:

from $33.99

(1)

(16) Positive Stop PTFE Valve Seals: for 3/8" Valves and .530" Guides

Performance Engine Valve Stem Seal Sets

from $426.99

(2)

Xtreme Energy 230/236 Hydraulic Flat Cam and Lifter Kit

Performance Engine Camshaft and Lifter Kits

from $350.99

(1)

Magnum Roller Rocker Arms for Ford; 3/8" Stud, 1.6 Ratio

Performance Engine Rocker Arms

Top Ford F-100 Pickup Performance Engines from Mr. Gasket

Your Ford F-100 Pickup will be purring again thanks to Mr. Gasket brand Performance Engines available for online order or in-store pick up. Popular Mr. Gasket parts include:

from $29.99

(20)

High Performance 180 Degree Thermostat for Increased Flow

Performance Engine Coolant Thermostats

from $29.99

(12)

High Performance Thermostat – 160 Degree Brass & Copper

Performance Engine Coolant Thermostats

from $23.79

(12)

Water Neck

Performance Water Outlets

Most Purchased Ford F-100 Pickup Performance Engines from Edelbrock

When you buy the most frequently purchased Edelbrock brand Performance Engines, you can be confident it will be the right part for your Ford F-100 Pickup. Here are the Edelbrock Performance Engines Advanced Auto customers buy the most:

from $597.99

(1)

Performer 390 Intake Manifold for Ford FE, Satin Finish

Performance Intake Manifolds

from $29.99

(20)

High Performance 180 Degree Thermostat for Increased Flow

Performance Engine Coolant Thermostats

from $35.99

(4)

Lower Intake Manifold Gasket Set: 11 Piece Set

Performance Engine Intake Manifold Gaskets

Ford F-100 Pickup Performance Engines

Your One-Stop Shop For Trusted Ford F-100 Pickup Performance Engines

Essential Ford F-100 Pickup Performance Engines

Competition Cams – Rocker Arms,FS/FW 1.6 7/16 Ultra Pro Mag (Part No.1632-16)

Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.7220)

Edelbrock – Performer 390 Intake Manifold for Ford FE, Polished Finish (Part No.21051)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1639)

Mr. Gasket – Cam Change Gaskets (Part No.4410)

Edelbrock – Performer Small-Block Ford 5.0L/ 5.8L Cylinder Head 1.90" (Part No.60379)

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

Edelbrock – Water Pump for Ford 429/460 in Polished Finish (Part No.8876)

Edelbrock – Cylinder Head Gasket Set for Ford (Part No.7337)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam (Part No.31-215-2)

Edelbrock – Front Timing Cover Gasket Set #6991 For Small-Block Ford, With Front Seal (Part No.6991)

Competition Cams – High Energy 6.881" Long, 5/16" Diameter Pushrod – Set of 16 (Part No.7831-16)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-222-3)

Competition Cams – Keyway Adjustable Billet Timing Set For ’65-’88 Ford 289-351W (Part No.7138)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9720)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2941)

B & M – Holeshot 2400 (Part No.40412)

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)

Competition Cams – (16) Positive Stop PTFE Valve Seals: for 3/8" Valves and .530" Guides (Part No.505-16)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)

FEL-PRO Performance – Performance Oil Pan Gasket Set (Part No.1820)

Mr. Gasket – Water Neck (Part No.2662)

Mr. Gasket – Water Neck (Part No.2664)