from

$47.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$26.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$36.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Each of these power steering pressure switches is 100% pressure tested to ensure that the part you receive will outperform any other switch available in the aftermarket.
Every one of our switch connectors has been carefully crafted to ensure proper fitment, as engine management systems require reliable connections in order to reach optimum performance.
Each switch that we offer endures rigorous end of line testing to ensure that every part meets the linearity specifications expected by the engine management system in your vehicle.

from

$74.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$20.29

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$21.29

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.

Product Features:

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$1011.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

PWR Rack and Pinions are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
Precision Routed and Constructed Fluid Transfer Tubes
Manufactured to meet or exceed OE requirements
Engineering, test, and quality validation in the USA

from

$74.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$10.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$66.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$24.99

CARDONE Rack and Pinion Transfer Tubing Assembly Kits include new components designed to meet OEM performance for form, fit, and function. All components necessary to complete the job are included to ensure your vehicle runs smoothly.

Product Features:

100% new tubing and connectors to ensure long lasting performance
New seals are provided where applicable
All components are included to ensure your vehicle runs smoothly
Guaranteed fit and function
Meets or exceeds O.E.M performance

from

$17.99

CARDONE Rack and Pinion Transfer Tubing Assembly Kits include new components designed to meet OEM performance for form, fit, and function. All components necessary to complete the job are included to ensure your vehicle runs smoothly.

Product Features:

100% new tubing and connectors to ensure long lasting performance
New seals are provided where applicable
All components are included to ensure your vehicle runs smoothly
Guaranteed fit and function
Meets or exceeds O.E.M performance

from

$4.49

This power steering pump washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this power steering pump washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$52.99

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$7.79

Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$57.99

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$29.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$52.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$57.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$30.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$28.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features: