Ford E-450 Super Duty Air Intakes

Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
• 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

• Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
• The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
• The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
• Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
• Designed for long service life under harsh under-hood conditions.
• Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
• Designed with OE electrical connectors ensuring proper fits.

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

The Air Charge Temperature Sensor provides an input to the vehicles computer as to the temperature of the air entering the engine via the air cleaner assembly. The engine computer uses this input to control many operating conditions which in turn provides optimal engine operation, engine performance and clean tailpipe emissions.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
• SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
• EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
• PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• Intake manifold gasket set contains manifold gasket(s) needed to replace an intake manifold.
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles
• Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This throttle body motor is engineered to match the fit, function and performance of the original motor to help restore proper throttle response and engine idling on specified vehicle years, makes and models.

Product Features:

• Direct replacement – this electronic throttle body motor is engineered to match the fit, function and performance of the original throttle body motor on specified vehicle years, makes and models
• Restores functionality – designed to help restore proper electronic throttle response when the original motor has failed due to internal component damage, leaks or corrosion
• Durable construction – this motor is made from quality materials and components for reliable service
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications and covered by an impressive two-year, unlimited mileage warranty, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.

If you need to swap out the intake manifold on select Ford trucks, SUVs or vans, this proven replacement is the best solution. It’s made in the USA to deliver reliable quality that matches the fit, function and performance of the original. It has several smart features, such as integrated gaskets that sit in the manifold, rather than the carrier gasket design of the factory unit, reducing contact points with the head to help prevent potential air leaks. The complete kit includes the tough polymer manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws. It also has an integrated PCV nipple to ensure proper vacuum, an updated thermostat design to prevent coolant leaks, and a clamp to keep the coolant block off cap in place. Don’t waste money going back to the dealership, and don’t waste time with an aftermarket imitator that isn’t up to the job. Fix your manifold issues with this reliable replacement.

Product Features:

• Ideal replacement – this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines
• Made in USA – designed, engineered and manufactured in the United States to deliver consistent quality and precise construction
• Proven design – features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance
• Complete kit – includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws

THROTTLE BODY

THROTTLE BODY

THROTTLE BODY

Original equipment throttle bodies often fail when moisture and oil intrusion foul the internal electronics. This Dorman OE FIX throttle body features Dorman Sensor Shield technology, a proprietary butterfly shaft seal to prevent future failures from this contamination.

Product Features:

• Upgraded design – this plug-and-play replacement throttle body features a proprietary Sensor Shield butterfly shaft seal to prevent future failures
• New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
• Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
• Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience

When a vehicle idles erratically, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This replacement electronic throttle body is designed to match the performance of the original equipment unit on specified vehicles and is built from high-quality materials with exacting standards to help prevent future failures.

Product Features:

• Direct replacement – this replacement electronic throttle body is designed to match the performance of the original equipment throttle body on specified vehicles
• Ideal solution – engineered to help restore proper engine performance when the factory throttle body is malfunctioning due to oil ingress or dirt and carbon buildup, resulting in DTCs and erratic idle
• Durable construction – features high-quality materials engineered and manufactured to exacting standards to help prevent future failures
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Continental electronic throttle bodies are the genuine OEM part. Continental sensors are made and manufactured to the highest quality and original equipment specifications. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation. Electronic throttle bodies are essential in optimizing fuel economy and ensure your vehicle is running at peak performance and efficiency.

Product Features:

• The exact OEM part
• Exact form, fit, and function
• Easy installation
• Durable robust design
• Made in ISO certified facilites

Innovative engineering, manufacturing technology And quality control ensure that Spectra Premium electronic throttle body modules meet or exceed the performance of the original equipment they replace.

Product Features:

• Designed for the perfect fit every time
• OE level reliability and function
• Fit and road tested to ensure dependable real world performance
• Designed as complete assembly with included position sensor
• No core required

All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.

Product Features:

• Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
• Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
• 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
• Each unit is guaranteed to fit and function like the original.