Ford E-350 Econoline Air Intakes

Please Select your Vehicle to See Exact Fit Parts

Essential Ford E-350 Econoline Air Intakes

Edelbrock – Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (Part No.12624)

Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs

from

$13.99
The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var

Product Features:
  • Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
  • Includes Gasket
  • 1/2 in. x 28 Power Valve Thread
  • For Applications That Prefer To Run Carbs Without The Power Valves
  • Made In The USA
See More

Carquest Premium – Throttle Position Sensor (Part No.ECC1019)

Throttle Position Sensor

from

$43.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Edelbrock – Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887 (Part No.8728)

Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887

from

$191.99


Product Features:
  • Fiber Laminate Spacers
  • Provide Heat Insulation Between Upper and Lower
  • Creates Cooler/Denser Charge
  • Raise Intake 0.5in. For More Valve Cover Clearance
  • Includes all Necessary Hardware for Installation
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60845)

Fuel Injection Throttle Body Mounting Gasket

from

$3.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Dorman – Electronic Throttle Body: New (Part No.977-584)

Electronic Throttle Body: New

from

$329.99
When a vehicle idles erratically, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This replacement electronic throttle body is designed to match the performance of the original equipment unit on specified vehicles and is built from high-quality materials with exacting standards to help prevent future failures.

Product Features:
  • Direct replacement – this replacement electronic throttle body is designed to match the performance of the original equipment throttle body on specified vehicles
  • Ideal solution – engineered to help restore proper engine performance when the factory throttle body is malfunctioning due to oil ingress or dirt and carbon buildup, resulting in DTCs and erratic idle
  • Durable construction – features high-quality materials engineered and manufactured to exacting standards to help prevent future failures
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Holley EFI – MFLD KIT; FORD 351W HI-RAM; 95MM EFI (Part No.300-241)

MFLD KIT; FORD 351W HI-RAM; 95MM EFI

from

$1400.99
MFLD KIT; FORD 351W HI-RAM; 95MM EFI

Edelbrock – Carburetor Throttle Cable Bracket #1495 For Ford 429/460 Big-Block (Part No.1495)

Carburetor Throttle Cable Bracket #1495 For Ford 429/460 Big-Block

from

$28.99


Product Features:
  • Repositions Stock Throttle Cable Bracket
  • Use With PN[1483]
  • Use w/Stock Throttle Cable Bracket
  • For Fords w/Cable Activated Throttles
  • Fords w/Automatic Transmission Kickdown Rod
See More

Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)

Carburetor Accelerator Pump Diaphragm #12400 30cc

from

$13.99
Product Features:
  • The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
  • Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More

Delphi – Fuel Injection Idle Air Control Valve (Part No.CV10091)

Fuel Injection Idle Air Control Valve

from

$61.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
  • Provides superior fit resulting in an easier installation
  • Maximizes fuel and engine efficiency
  • Manufactured and engineered with premium quality and stringent standards eliminating potential for malfunctions
See More

Edelbrock – Throttle Lever #1483 For Ford 1968 And Later, Gold Iridited Finish (Part No.1483)

Throttle Lever #1483 For Ford 1968 And Later, Gold Iridited Finish

from

$40.99
Product Features:
  • Converts Throttle Lever on Carb for Proper Use
  • For Edelbrock Performer Series Carburetors Only
  • Also Accepts Cruise Control
  • Use with Appropriate Throttle Cable Plate
See More

Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)

Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip

from

$22.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:
  • Center Hung Floats
  • 0.11 in. Needle Diameter
  • Viton® Needle Material
  • Sold Individually
  • Non-Adjustable Type
See More

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl

from

$14.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:
  • Fits Holley® Carburetors With Center Hung Fuel Bowl
  • Includes Adjusting Nut
  • Includes Locking Screw
  • Includes O-Ring
  • Includes Washers
See More

Edelbrock – Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs (Part No.12412)

Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs

from

$26.99
The Edelbrock #12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.

Product Features:
  • Steel Material
  • For Holley® 4150, 4150HP, 4160; Demon King, Mighty, Race, Road, Sea, Speed; Barry Grant Claw
  • Includes Lightest To Heavy
  • Set of 7
  • Made in The USA
See More

Carquest – Air Charge Temperature Sensor (Part No.31A1018)

Air Charge Temperature Sensor

from

$22.99
The Air Charge Temperature Sensor provides an input to the vehicles computer as to the temperature of the air entering the engine via the air cleaner assembly. The engine computer uses this input to control many operating conditions which in turn provides optimal engine operation, engine performance and clean tailpipe emissions.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Application matched components ensures system operation in like new condition.
See More

Holley – Street Carburetor: 600 CFM, Manual Choke, 4 Barrel, Square Bore, Single Inlet, Gold Dichromate (Part No.0-1850C)

Street Carburetor: 600 CFM, Manual Choke, 4 Barrel, Square Bore, Single Inlet, Gold Dichromate

from

$614.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.

Product Features:
  • Gold Dichromate Finish For Corrosion Resistance w/Classic Look
  • Performance Upgrade For Stock To Mildly Modified Vehicles
  • Universal Calibration For Easy Bolt-On Performance
  • Man. Choke Cable Hand Controlled For Cold Start Control
  • Vacuum Secondaries For Use On Wide Variety Of Vehicles
  • Single Feed Fuel Inlet For Easy Installation
  • Power Valve Blow Out Protection
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
  • Compensates For All Vehicle Weights Gearing/Transmissions
See More

Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)

Carburetor Gasket Kit #12371 Fits 4160 Carburetors

from

$20.99
The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:
  • Nitrile Rubber Material
  • Metering Block Type
  • Set of 4
  • Fits Holley® 4160 Carburetors
  • Made In The USA
See More

Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1847)

Carburetor Repair Kit

from

$49.99
Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Felpro – Air Cleaner Mounting Gasket (Part No.60038)

Air Cleaner Mounting Gasket

from

$4.29
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Wells Vehicle Electronics – Carburetor Choke Pull-Off 1C1212 (Part No.1C1212)

Carburetor Choke Pull-Off 1C1212

from

$45.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Edelbrock – Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors (Part No.12403)

Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors

from

$43.99
The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly

Product Features:
  • Multi-Color
  • Plastic Material
  • Fits Holley® 2300, 4150, And 4160 Carburetors
  • Set of 8
  • Made In The USA
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1571)

Multi-Use Connector

from

$55.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Felpro – Carburetor Mounting Gasket (Part No.60269)

Carburetor Mounting Gasket

from

$6.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Edelbrock – Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange) (Part No.1223)

Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange)

from

$50.99
Product Features:
  • Edelbrock triple chrome-plated round air cleaner #1223 work with all popular 5-1/8″ diameter Carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB).
  • The 10″ and 14″ models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter #1205 (sold separately).
  • #1208, #1209 and #1221 fit all Edelbrock Carburetors.
  • Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut.
  • Dimensions are accurate within 1/8″.
See More

Edelbrock – Performer Carburetor Calibration Kit #1487 for #1406 Carburetors (Part No.1487)

Performer Carburetor Calibration Kit #1487 for #1406 Carburetors

from

$66.99
Product Features:
  • Customize Carburetor Calibration and Performance
  • Owners Manual has Assembly Help
  • Includes Metering Rod Retaining Spring
  • Includes Metering Rods
  • Includes Metering Jets
  • Includes Step-Up Springs
See More

Helping You Find the Right Air Intakes for Your Ford E-350 Econoline

You love your E-350 Econoline. So we’ve made it easier than ever to help you find Ford E-350 Econoline Air Intakes in our online catalog. Our inventory holds 246 aftermarket and OEM Air Intakes for your Ford E-350 Econoline, ranging from $3.29 to $2,000.99.

We offer parts from 17 brands trusted to make quality Air Intakes for your Ford E-350 Econoline. Before you buy, take some time to read through customer reviews. We currently have 10,418 reviews of Ford E-350 Econoline Air Intakes from previous customers. Some of the top rated parts include Fuel Injection Throttle Body Mounting Gasket with 4.7 stars and INTAKE MANIFOLD GASKET SET with 4.3 stars.

Find your E-350 Econoline Air Intakes here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford E-350 Econoline part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Air Intakes Brands for Your Ford E-350 Econoline

Our inventory holds Air Intakes for your Ford E-350 Econoline from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Felpro, Carquest Premium, and Edelbrock, all of which can keep that Ford happy.

Top-Rated Edelbrock Air Intakes

Leading Edelbrock Air Intakes

We carry Edelbrock brand parts for your Ford E-350 Econoline across several catalog categories, including Carburetor Parts and Air Cleaner Parts. Some of our most reviewed Edelbrock parts include:

FAQs for Ford E-350 Econoline Air Intakes

What are the most purchased Air Intakes for the Ford E-350 Econoline?

Out of 246 Air Intakes for the Ford E-350 Econoline, the most popular in our inventory are:
Fuel Injection Throttle Body Mounting Gasket
from $3.49
(27)
Fuel Injection Throttle Body Mounting Gasket
Throttle Body Mounting Gaskets
Fuel Injector Seal Kit
from $8.99
This product is not rated
Fuel Injector Seal Kit
Carburetor and Injector Seal Kits
Throttle Position Sensor
from $45.99
This product is not rated
Throttle Position Sensor
Throttle Position Sensors

What are the top-rated Ford E-350 Econoline Air Intakes?

Top-rated Air Intakes for your Ford E-350 Econoline based on customer reviews/ratings are:
Fuel Injection Throttle Body Mounting Gasket
from $7.49
(11)
Fuel Injection Throttle Body Mounting Gasket
“great”
INTAKE MANIFOLD GASKET SET
from $26.99
(8)
INTAKE MANIFOLD GASKET SET
“No leaks great product”
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
from $474.99
(7)
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”