Ford Custom 500 Fuel and Emissions Systems
Top Ford Custom 500 Fuel and Emissions Systems Categories
We carry over 57 Fuel and Emissions Systems in inventory for the Ford Custom 500. If you’re looking for aftermarket Fuel and Emissions Systems for your Ford Custom 500, check out all these categories:
Essential Ford Custom 500 Fuel and Emissions Systems
Carquest Premium – Fuel Cap: 10640, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10640)
from
$8.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Mechanical Fuel Pump 3541157: Includes Gasket (Part No.3541157)
from
$33.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Spectra Premium – Fuel Tank Strap (Part No.ST57)
from
$32.49
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
- Direct fit ensures safe, secure fuel tank installation
- Product individually packaged and labeled to help reduce product damage prior to installation
- Industry leading coverage on straps for plastic tanks
Edelbrock – EGR Valve Spacer Plate #3898 For Ford Big-Block 4V (Part No.3898)
from
$19.99
Product Features:
See More
- Composite Material
- 4-Hole Gasket Type
- Includes 4-Hole Steel Plate-To-Intake Manifold Gasket
- Includes EGR Spacer-To-Four Hole Steel Plate Gasket
- For Use With Part #3721, 3723, 3771, 3781, And 3783
Dorman – Help – Carburetor Pre-Heater Hose – 2 In. X 18 In. – Aluminum (Part No.96024)
from
$5.99
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
- Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Cardone – Smog Air Pump (Part No.32-115)
from
$196.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time
- High temperature grease extends bearing life, resulting in longer pump life
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Cardone – Smog Air Pump (Part No.32-134)
from
$198.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time
- High temperature grease extends bearing life, resulting in longer pump life
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Felpro – Carburetor Mounting Gasket (Part No.60716)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
KAI – Fuel Tank Lock Ring (Part No.TNKLO03)
from
$19.99
New Standard Replacement Lock/O-Ring Set
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Fuel Pump Lock Ring (Part No.579-003)
from
$9.99
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
- Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1517)
from
$15.99
The block-off plates are precision cut to cover stock fuel pump openings. Gasket included. Available in chrome plated or polished aluminum finish.
Product Features:
See More
Product Features:
- Precision cut
- Gasket included
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1003)
from
$30.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1009)
from
$29.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1004)
from
$18.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Spectra Premium – Fuel Tank (Part No.F47A)
from
$347.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Spectra Premium – Fuel Tank (Part No.F27D)
from
$177.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Spectra Premium – Fuel Tank (Part No.F27F)
from
$179.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Carquest Premium – Ported Vacuum Switch (Part No.ECA1429)
from
$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Ported Vacuum Switch (Part No.EC902)
from
$40.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1048)
from
$1.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1068)
from
$1.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70020)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1074)
from
$14.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Ford Custom 500 Fuel and Emissions Systems Categories
Helping You Find the Right Fuel and Emissions Systems for Your Ford Custom 500
You love your Custom 500. So we’ve made it easier than ever to help you find Ford Custom 500 Fuel and Emissions Systems in our online catalog. Our inventory holds 57 aftermarket and OEM Fuel and Emissions Systems for your Ford Custom 500, ranging from $1.79 to $347.99.
We offer parts from 11 brands trusted to make quality Fuel and Emissions Systems for your Ford Custom 500. Before you buy, take some time to read through customer reviews. We currently have 6,021 reviews of Ford Custom 500 Fuel and Emissions Systems from previous customers. Some of the top rated parts include Carburetor Pre-Heater Hose – 2 In. X 18 In. – Aluminum with 4.8 stars and Mechanical Fuel Pump 360582: Includes Gasket with 1.0 stars.
Find your Custom 500 Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Custom 500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Fuel and Emissions Systems Brands for Your Ford Custom 500
Our inventory holds Fuel and Emissions Systems for your Ford Custom 500 from 11 trusted brands. You’ll find OEM and aftermarket parts from brands like Felpro, Carquest Premium, and Delphi, all of which can keep that Ford happy.
We have Edelbrock parts available for your Ford Custom 500 in categories like Exhaust Gas Recirculation (EGR) Parts. Some of the top-rated Edelbrock parts in these categories are:
Top-Rated Mr. Gasket Fuel and Emissions Systems
Leading Mr. Gasket Fuel and Emissions Systems
We carry Mr. Gasket brand parts for your Ford Custom 500 across several catalog categories, including Fuel Pumps. Some of our most reviewed Mr. Gasket parts include:
FAQs for Ford Custom 500 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the Ford Custom 500?
Out of 57 Fuel and Emissions Systems for the Ford Custom 500, the most popular in our inventory are:
What are the top-rated Ford Custom 500 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your Ford Custom 500 based on customer reviews/ratings are:
from
$5.99
(4)
Carburetor Pre-Heater Hose – 2 In. X 18 In. – Aluminum
“Despite the search function this is a perfect fit for my 1974 Beetle. Best quality I ever had with one of these. Light years ahead of the paper or al”
from
$23.99
(4)
Mechanical Fuel Pump 360582: Includes Gasket
“i had this fuel pump on my 1971 Torino 500 351c it started spraying gas out of the weap hole about 2 months after installing. I found another part sto”
